• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.166-174
• /
• 1998

The distribution of oil film thickness in piston were measured by induced fluorescence method. A Xe lamp was used as light source. Coumarine-6 was mixed with oil as the fluorescent dye. Fluorescent signal which is proportional to the oil film thickness was acquired by CCD camera and transmitted to the personal computer as video signal. In order to solve the problem of measurement system, irregular distribution and unstability of light intensity, as well as to know the relationship between the oil film thickness and output signal, three different calibration techniques were used. Motoring and firing tests were performed in a single cylinder research engine with transparent liner. By analyzing the oil film thickness converted from the photographed image, it was observed that each of three piston rings scrapes the oil both upward and downward and oil film thickness is not uniform horizontally at a given piston land. The amount of oil in each land was considerably affected by the engine load. It is thought that the blow-by gas blows the oil down to the crankcase.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.10a
• /
• pp.31-33
• /
• 2005

• Journal of Nutrition and Health
• /
• v.29 no.2
• /
• pp.232-241
• /
• 1996

This study was designed to compare the effect of different dietary fats on plasma lipids, the degree of lipid peroxidation and the activity of antioxidant enzymes in RBC and liver rats treated with or wighout 1, 2-dimethylhydrazing (DMH). Male Sprague Dawley rats, at 7 weeks-old, were divided into control and DMH-treated grous, and each group was again subdivided into four were perilla oil (PO), blend fat (BF) containing ten different kinds of dietary oil, beef tallow (BT), corn oil (CO). At the same time, each rat was injected intramusculary with saline(for control) or DMH twice a week for 6 weeks to give total dose of 180 mg/kg body weight. Compared with BT feeding, BF reduced plasma total choesterol level and PO and Co reduced plasma TG levels (p<0.05). DMH injection decreased plasma cholesterol in all dietary groups. However, PO decreased tocopherol levels and increased TBARS levels in RBC compared to BT. The degree of hemolysis in PO group was higher than that of BT group (p<0.05 only in control group. Fatty acid composition of hepatic microsome was reflected by dietary fatty acid profile. The peroxidizability index and TBARS level in hepatic micorsome were significantly increased but tocopherol level was lowered in PO group compared to BT group. Activites of superoxide dismutase and glutathione peroxidase in RBC and hepatic cytosol were not influenced y dietary fats and DMH treatment(p<0.05). Overall, perilla oil rich in $\omega$3 $\alpha$-linolenic acid could be a very important dietary source in reducing plasma lipids and blend fat was also good dietary oil mixture in reducing plasma cholesterol. However, the degree of lipid peroxidation was greater in tissue by perilla oil feeding and it is very difficult to use only perilla oil as oil source for meal preparation, so that it could be suggested to use more perilla oil and fish to give an equal effect of blend fat in order to reduce the risk factors against cardiovascular disease.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.2
• /
• pp.99-110
• /
• 2016

When a riser is damaged, the oil spills to sea. Oil spills cause huge economic losses as well as a destruction of the marine environment. To reduce losses, it is needed to predict spilled oil volume from risers and the excursion of the oil. The present paper simulated the oil spill for a damaged riser using open source libraries, called Open-FOAM. To verify numerical methods, jet flow and Rayleigh-Taylor instability were simulated. The oil spill was simulated for various damaged leak size, spilled oil volume rates, damaged vertical locations of a riser, and current speeds. From results, the maximum excursion of the spilled oil at the certain time was predicted, and a forecasting model for various parameters was suggested.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.3
• /
• pp.223-229
• /
• 1995

The effects of palm oil and soybean oil as a high energy source diet on the performance of broilers under the warm humid environment were studied. Palm oil and soybean oil, either singly or mixed, were incorporated in the experimental diets to a total of 6% of the diet. The performance of the chicken improved (though not significant) with increasing unsaturated fatty acid content in the diets, but the responses to treatments were not consistent. The carcass fat content was generally higher in all the treated groups compared to the control but the differences were not statistically significant. The results also failed to show any effect of combining two sources of oils. Fatty acid composition in the body was found to be influenced greatly by dietary fat. When soybean oil was used instead of palm oil, the amount of linoleic and linolenic acids in the carcass were increased proportionately.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.2
• /
• pp.338-344
• /
• 2001

According to the MARPOL 73/78 of Convention, all ships should have oil filtering equipment and 15 ppm bilge which satisfy Requirements of MARPOL 73/78. This study is concerned with designing and manufacturing a prototype Oil content Meter(OCM) used in machinery area of ship. The prototype OCM is composed of two parts which are oil content sensing module and data processing unit. The oil content sensing module consists of infra-red light source, photo-diode light receivers, and a glass tube for bilge water sample. The data processing unit has a micro-processor as hard core and peripheral devices. The experimental results of prototype OCM and analysis of collected data reveal linear property between transmitted light and scattered light as long as the bilge water has low level content of oil. And this linear property leads to a oil content detecting method which is programmed and loaded into the data processing unit. The performance of the prototype OCM is compared with that of the commercial OCM in the market.

• Journal of ILASS-Korea
• /
• v.2 no.3
• /
• pp.44-50
• /
• 1997

Bio-diesel oil is a great possibility to solve the pollution problem caused by the exhaust gas from diesel engine vehicles. Recently the use of bio-oils in disel engines has received considerable attention to the forseeable depletion of world oil supplies. So, Bio-diesel oil has been attracted with attentions as an alternative and clean energy source. The objective of this paper is to experimentally investigate the characteristic of performance using light oil, rice-bran oil, heated rice-bran oil, rice-bran oil treated with ultrasonic energy. We included rice-bran oil and applied ultrasonic energy to highly viscous bio-oils. These methods seems to have never been tried yet. The final data may be able to be applicated for the design of the diesel engine using an alternative fuel.

• Food Science and Industry
• /
• v.50 no.4
• /
• pp.65-81
• /
• 2017

In Korea, sesame oil has been used as a flavor source mainly by edible oil since ancient times, and it has been used by domestic screw pressing. In the 1960's, the demand for edible oils and fats increased significantly due to the improvement of national income and changes in food consumption patterns. In the early 1970's, a few edible oil manufacturing companies with modern solvent extraction and refining plants were established. In Korea, edible oil manufacturers account for more than 85% of employees with 50 or fewer employees. In Korea, there is a very shortage of raw materials for edible oils and fats, domestic production of edible oil is decreasing year by year and import volume is continuously increasing. While importing the edible oil bearing ingredients including soybean and extracted oil in the past, recently mainly imports crude oil and refines it in Korea. Soybean oil, palm oil and tallow account for 70~90% of total imported edible oils. Due to the recent well-being trend, the demand for olive, canola and grapeseed oils as household edible oil has increased and the production of blended oil has been greatly increased. Since the late 1980's, people have recognized edible oil and fat as a food instead of seasoning ingredient and have increased their edible oil and fat intake in Korea. Since the early 2000's, refined oil and fat products produced in Korea have been exported and is increasing every year.

• Natural Product Sciences
• /
• v.1 no.1
• /
• pp.10-16
• /
• 1995

A number of microorganisms have been screened for growth on sunflower oil as a sale carbon source for production of useful chemicals. Rhizopus stolonifer NRRL 1478 was found to transform the lipid contents of sunflower oil into dodecyl ${\beta}$-D-glucopyranoside and dodecanedioic acid in 15 and 25% yield respectively. The produced compounds were isolated and purified by column chromatography and its chemical identity were established using MS, IR, $^1H\;and\;^{13}C\;NMR$ spectroscopy.

• Journal of Power System Engineering
• /
• v.19 no.2
• /
• pp.90-95
• /
• 2015

Recently worldwide concern and research is being actively conducted on green energy which can reduce environmental pollution. A plant such as the natural rapeseed oil, soybean oil, palm, etc. is used as a bio source in home and industry. Biofuels is a sustainable fuel having economically benefits and decreasing environmental pollution problems caused due to fossil fuel, and it can be applied to the conventional diesel engine without changing the existing institutional structure. Waste vegetable oil contains a high cetane number and viscosity component, the low carbon and oxygen content. A lot of research is progressing about the conversion of waste vegetable oil as renewable clean energy. In this study, waste oil was prepared to waste cooking oil generated from the living environment, and applied to diesel engine to confirm the possibility and cost-effectiveness of biodiesel blend waste oil. As a result, brake specific fuel consumption and NOx was increased, carbon monoxide and soot was decreased.