• Journal of the Korean Society for Marine Environment & Energy
• /
• v.1 no.2
• /
• pp.40-51
• /
• 1998

The interaction of contained oil slicks with current was investigated with a two-dimensional experimental setup in the circulating water channel facility. A vertical plate was used to contain the oils against the currents and the evolution of the oil slick, mainly focusing on the water/oil interface, was examined with an aid of a laser sheet. Two different oils - soy bean oil and diesel oil - were studied with varying the current speed (10 cm/sec to 35 cm/sec), the barrier depth (4 cm and 8 cm) and the volume of oil (2 liter to 12 liter). Different types of the interface behavior were observed according to the conditions and their mechanism was discussed based basically on the dimensional analysis. The critical speeds of two types of oil loss mechanism (entrainment failure and drainage failure) were also examined.

• Journal of the Korean Society of Safety
• /
• v.34 no.6
• /
• pp.22-28
• /
• 2019

In South Korea, the enact of Korean Coast Guard Act-1 manages physical and chemical oil-dispersants. Oil snare, which is made of polypropylene, is newly added to the aforementioned act, and it has advantage on the ease of recovery compare to other adsorbents. This study synthesized bunker B-oil with diesel-oil and bunker C-oil to perform an adsorption test based on three samples which were manufactured in South Korea. As a result, adsorption test revealed 5.2 g/g more adsorption than the previous results from the act. Additional toluene test revealed that all the samples satisfied 90.0%, however coloured samples could release its pigment on the marine environment. Thus, colorless samples are recommended on the risk management of marine accidents. The study on the basic direction of the calculation of the test items and the standard value for the quality control of the oil snare was also carried out.

• Journal of the Korean Society of Safety
• /
• v.11 no.1
• /
• pp.75-83
• /
• 1996

This paper was concerned with pool fire about many used kerosene and diesel oil. In order to know the thermal effects of kerosene and diesel oil, temperature change in the pool fire of these fuels were obtained as a variation of combustion time and the tank's height and diameter by using the data acquisition system, And fuel combustion velocity were derived as a function of the diameter and wall thickness of tanks and combustion time. As a result, when the tank's height was 15㎝, the greater diameter the higher temperature rising regardless of tank's wall thickness and fuels. But, when the tank's height is 30㎝, temperature rising was not higher than 15㎝. Also, temperature rising in the pool fire of kerosene much higher than diesel oil. Kerosene's combustion velocity was about two times faster than diesel oil. And, kerosene's combustion velocity was increased according to the increasing of tank's diameter and combustion time. But, diesel oil's combustion velocity was a little increased or not. Surrounding temperature change of tank with the pool fire was obtained temperature distribution of 0∼35℃ according to the change of tank's diameter and distance from the tank's wall.

• Microbiology and Biotechnology Letters
• /
• v.29 no.4
• /
• pp.253-257
• /
• 2001

Essential oil of Chamaecyparis obtusa showed antimicrobial on relatively broad spectrum of bacterial and fungal species. Staphylococcus epidermidis was highly sensitive to the essential oil but Streptococcus aureus and Streptococcus mutans were not. Vibro parahemolyticus, Pseudomoas aeruginosa and Pseudomoas putida showed sensitivity at the concentration higher that 400 ppm, Thegrowth of a pathogenic yeast Candida albicans was inhibited by the essential oil above 200ppm. The radialgrowth of several filamentous fungi was also inhibited The antifungal activity of the essential oil was effective on two plant pathogens Fusarium oxysporum and Altenaria mali. These results sug-gest that essential oil of Chamaecyparis obtusa has an antimicrobial activity by inhibiting bacterial and fungal species.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.6
• /
• pp.614-619
• /
• 2009

An engine for marine propulsion and power generation consists of several cylinder liner-piston sets. And the oil groove is on the cylinder liner inside wall for the lubrication between a piston and cylinder. The machining process of oil groove has been carried by manual work so far, because of the diversity of the shape. Recently, we developed an automatic grinding robot system for oil groove machining of engine cylinder liners. It can covers various types of oil grooves and adjust its position by itself. The grinding robot system consists of a robot, a machining tool head, sensors and a control system. The robot automatically recognizes the cylinder liner's inside configuration by using a laser displacement sensor and a vision sensor after the cylinder liner is placed on a set-up equipment.

• Tribology and Lubricants
• /
• v.19 no.2
• /
• pp.94-101
• /
• 2003

Used motor oil contains pollutants, including organic chemicals and meta]s. When disposed of improperly - in the trash, on the ground or in a sewer system - the pollutants may reach rivers, lakes or the ground water. Thus, all the waste oil products such as waste motor oil, waste oil container, and waste oil filter should be collected and transported for recycling or disposal by waste oil regulations. Because waste oil container is a valuable resource, waste oil containers can be reused, cleaned, buried, and burned for recycling processes. This paper presents the integrated management system that may increase the efficiency and productivity for collecting and reprocessing waste oil containers such as steel can and plastic container. The integrated management system consists of collection and transportation process management system and confirmation and certification process management system for waste oil containers.

• Biomolecules & Therapeutics
• /
• v.31 no.3
• /
• pp.298-305
• /
• 2023

This study aimed to examine the effects of several essential oils on insomnia in dementia patients following transdermal treatment (aromatherapy). The mean change rates (%) of sleep biomarkers were compared between the single essential and jojoba (vehicle) oil massage groups in this study. The lavender (L) essential oil massage group demonstrated a significant decrease in the mean change rate (%) of 24-h urinary free cortisol, whereas the valerian (V) essential oil massage group demonstrated a significant increase in the mean change rate (%) of serum 5-hydroxytryptamine. In addition, a significant increase in the mean change rate (%) of 24-h urinary norepinephrine was observed in the chamomile (C) essential oil massage group only. Based on these results, valerian, lavender, and chamomile oils were mixed in different ratios to produce blending oils A (L:C:V=2:2:1), B (L:C:V=3:1:1) and C (L:C:V=1:3:1). The highest level of serum 5-hydroxytryptamine was observed after administering blending oil A. These results suggest that blending oil A might possess therapeutic effects against insomnia. Overall, it is hypothesized that the optimally blended essential oil will produce synergic effects when combined with hypnotic drugs.

• YAKHAK HOEJI
• /
• v.56 no.5
• /
• pp.320-325
• /
• 2012

To develop a new effective and safe natural antibiotics and antioxidant the essential oil was extracted from the roots of Anthriscus sylvestris by steam distillation. Its composition was analyzed by GC-MS. The activities of the essential oil fraction and its main components were evaluated against antibiotic-susceptible and -resistant strains of some food-born bacteria. In addition the synergism was examined with this oil combined with antibiotic by checkerboard titer test. The antioxidant activities were determined by in 1,1-diphenyl-2-picryl-hydrazil (DPPH) free radical scavenging activity test and reducing power assay. The essential oil fraction of A. sylvestris revealed significant inhibiting activities against antibiotic-susceptible and -resistant species of Vibrio and Shigella with MICs ranged from 1.00~4.00 mg/ml. It showed synergistic or additive effects when it was combined with amphicillin or trimethoprim/sulfamethoxazole (1 : 9). Additionally, the essential oil fraction of A. sylvestris exhibited significant DPPH free radical scavenging activity and the reducing power.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.5
• /
• pp.815-820
• /
• 2008

Two culture-independent methods, namely ribosomal DNA libraries and denaturing gradient gel electrophoresis (DGGE), were adopted to examine the microbial community of a Malaysian light crude oil. In this study, both 16S and 18S rDNAs were PCR-amplified from bulk DNA of crude oil samples, cloned, and sequenced. Analyses of restriction fragment length polymorphism (RFLP) and phylogenetics clustered the 16S and 18S rDNA sequences into seven and six groups, respectively. The ribosomal DNA sequences obtained showed sequence similarity between 90 to 100% to those available in the GenBank database. The closest relatives documented for the 16S rDNAs include member species of Thermoincola and Rhodopseudomonas, whereas the closest fungal relatives include Acremonium, Ceriporiopsis, Xeromyces, Lecythophora, and Candida. Others were affiliated to uncultured bacteria and uncultured ascomycete. The 16S rDNA library demonstrated predomination by a single uncultured bacterial type by >80% relative abundance. The predomination was confirmed by DGGE analysis.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.435-437
• /
• 2003

This study presents work to utilize RADARSAT SAR image for forecast oil slick trajectory movement. The fractal dimension algorithm used to detect oil slick. The Doppler frequency shift and quasi-linear model was used to simulate a current pattern from RADARSAT image. The Fay’s algorithm of oil slick spreading was developed based on a Doppler frequency shift model. Thus, the study shows that fractal dimension algorithm discriminated the oil slick from the surrounding water features. The quasi-linear model shows that the current pattern can be simulated from single RADARSAT image. The oil slick trajectory model shows that after 48 hrs, the oil slick parcels deposited along the coastal waters.