• Asian-Australasian Journal of Animal Sciences
• /
• 제8권2호
• /
• pp.151-158
• /
• 1995

A study was carried out to investigate the effect of palm oil supplementation on the growth, carcass composition and fatty acid distributions of the broilers fed isonitrogenous and isocaloric diets. This study showed that palm oil supplementation increased feed consumption, weight gain and nitrogen intake. Feed conversion improved at higher fat inclusions, but not significant. Male birds consumed significantly more feed than females resulting in significant increase in energy consumption and weight gain. Increaseing fat content in the ME:P constant diet did not produce significant difference in the fat content of the chicken. Fatty acids content of the diet exert varying effects of the composition and distribution of fatty acids in muscles of the chicken. The fatty acids found in larger amount in the breast and thigh muscles were palmitic, oleic and linoleic. The fatty acids of the breast and thigh muscles were found to correspond the fatty acids of the diets. There were no differences in the fatty acids distribution patterns between the sexes.

• 대한기계학회논문집
• /
• 제3권1호
• /
• pp.1-9
• /
• 1979

Methanol was examined as supplemental fuel for open chamber type and pre-combustion chamber type diesel engine. Pre-determined quantities of diesel oil were injected as ordinary diesel engines and methanol was added at inlet pipe using venturi, nozzel and and float chamber for the rest of the charge. In this mode of operation, addition of methanol reduced inlet and exhaust temperature. Inlet air quantities were essentially unchanged in spite of lower inlet temperature. Exhaust smoke was significantly reduced At light load when both diesel oil and methanol were introduced with small quantities, specific heat consumption was considerably increased. However, with the increase of the quantity of methanol or diesel oil, specific heat consumption was improved. With sufficient quantities of diesel oil enough to produce the power above 3/4 load, addition of methanol showed better thermal economy.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권8호
• /
• pp.1116-1122
• /
• 2009

냉동냉장창고 내 열부하 감소를 위한 유압 구동식 냉각기의 특성을 실험적으로 평가한 결과 고내 온도강하에 있어서 초기에는 급격하게 이루어지고, 설정온도가 낮아질수록 온도 강하율은 적게 나타났다. 기존 전기 구동식과 비교한 결과 유압식이 더 빠른 온도 강하율과 냉동기 운전시간이 짧게 나타나 실제냉동창고의 경우, 입고 물품의 품질저하 방지 및 전력 절감에 기여할 수 있을 것으로 판단되었다. 그리고 고내 설정온도가 낮을수록 소비동력은 급격히 증가하였고, 유압식이 더 적은 동력을 소비하는 것으로 나타났으며, 두 방식 모두 설정온도에 도달함에 따라 성능계수는 지속적으로 저하하였고, 유압식이 최대 25%정도 높게 나타났다. 고내 온도유지에 있어서는 설정온도가 낮을수록 냉동기의 운전 횟수가 적고, 운전시간이 길어 소비동력이 많아지는 것으로 나타났으며, 유압식이 약 21~25%정도 적게 나타났다.

• 한국항해학회지
• /
• 제9권2호
• /
• pp.27-41
• /
• 1985

The transportation productivity is the throughput of utility per locations of resources and is able to be brought forth by using transportation mode. Therefore, Oil energy is necessary for using the transportation mode that is mainly consisted of four parts trucks, railroad, ship and aircraft, and Oil quantity used for such modes is not respectively same. Noticing Such a Point, the purpsoe of this paper is to reaserch the transportation mode of convertable cargoes and to minimize energy consumption quantity by adopting such a mode. We must ttend to Energy-Intensity, Transportation, Distance and cargo quantity for selecting the transport mode to energy consumption and the minimization of transportation energy consumption is concluded in the next LP Problem. As above mentioned, we can find the solution of Xij by the LP when Xij is transportation cargo per routes, and fullfil the minimization of Energy Consumption.

• 한국태양에너지학회 논문집
• /
• 제31권1호
• /
• pp.115-120
• /
• 2011

The energy used in Korea is strongly dependent on that produced by foreign countries. Accordingly, saving energy is more important than ever, because of the rise of international oil prices and depletion of oil resources. The development of energy efficient buildings is required especially for public buildings in Korea. In this study, the energy use of public buildings is identified. Then, the analysis of energy usage through regional offices in Busan City offers energy saving measures for public buildings.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권4호
• /
• pp.369-373
• /
• 1995

A study was conducted to determine the effects of varying palm oil levels (0 to 8%) in the diets on the performance of broilers under the warm humid tropical environment. Increasing palm oil levels resulted in corresponding rise in the dietary energy concentrations, and broilers fed on higher energy diets improved feed and energy consumption, daily weight gain and feed conversion ratio. Total carcass fat content was found to increase at higher levels of palm oil inclusions.

• Environmental Engineering Research
• /
• 제23권3호
• /
• pp.242-249
• /
• 2018

The use of palm oil and diesel blended with ethanol, known as a microemulsion biofuel, is gaining attention as an attractive renewable fuel for engines that may serve as a replacement for fossil-based fuels. The microemulsion biofuels can be formulated from the mixture of palm oil and diesel as the oil phase; ethanol as the polar phase; methyl oleate as the surfactant; alkanols as the cosurfactants. This study investigates the influence of the three cosurfactants on fuel consumption and exhaust gas emissions in a direct-injection (DI) diesel engine. The microemulsion biofuels along with neat diesel fuel, palm oil-diesel blends, and biodiesel-diesel blends were tested in a DI diesel engine at two engine loads without engine modification. The formulated microemulsion biofuels increased fuel consumption and gradually reduced the nitrogen oxides ($NO_x$) emissions and exhaust gas temperature; however, there was no significant difference in their carbon monoxide (CO) emissions when compared to those of diesel. Varying the carbon chain length of the cosurfactant demonstrated that the octanol-microemulsion fuel emitted lower CO and $NO_x$ emissions than the butanol- and decanol-microemulsion fuels. Thus, the microemulsion biofuels demonstrated competitive advantages as potential fuels for diesel engines because they reduced exhaust emissions.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.237-244
• /
• 2006

Limited and nonlimited emissions of scooters were analysed during several annual research programs of the Swiss Agency of Environment Forests and Landscape(SAEFL, BUWAL). Small scooters, which are very much used in the congested centers of several cities are a remarkable source of air pollution. Therefore every effort to reduce the emissions is an important contribution to improve the air quality in urban centers. In the present work detailed investigations of particle emissions of different 2-stroke scooters with direct injection and with carburetor were performed. The nanoparticulate emissions with different lube oils and fuels were measured by means of SMPS, (CPC) and NanoMet. Also the particle mass emission(PM) was measured with the same method as for Diesel engines. It can be stated, that the oil and fuel quality have a considerable influence on the particle emissions, which are mainly oil condensates. The engine technology influences the (nano)particle emissions by: mixture preparation, mixture tuning, oil consumption, postoxidation, quality, condition and temperature of the catalyst. Since the particulate emission of the 2-S consists mainly of lube oil condensates the minimization of oil consumption stays always an important goal.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제24회 춘계학술대회
• /
• pp.86-93
• /
• 1996

The lubrication characteristics of high-speed ball bearings has been investigated empirically using 45mm bore split inner ring ball bearings employed in small industrial gas turbine engines with oil-jet lubrication method. For the close structural simulation, experiments carried out with bearing mounting supports of real engines, such as bearing housings and oil nozzle assemblies with squeeze film dampers. Thus the results of tests can be directly applied to the design and the development of gas turbine engines. Testing was done by varying operating speeds, axial load on bearings, and lubricant flowrates. During testing, the temperature of bearing at outer-ring face, the power consumption of the driving motor, and the rotating resistance of the bearing were measured. From this study, the representative factors for lubrication characteristics at high speed was found, and the most important one was not operating speed but axial load up to 1.95 million dmN speed and 303 kgf axial load. Furthermore, the detailed variation of the rotational resistance of the bearing could be visualized by measuring the change of the radial load under the bearing supports. The rotational resistance consists of the frictional resistance and the bearing-cavity oil resistance.

• 무역상무연구
• /
• 제41권
• /
• pp.185-202
• /
• 2009

With the rapid development of oil and chemical industry in the late 20C, massive transportation of oil by oil tanker vessel has grown and it caused the big oil pollution accidents. When oil spill from the oil tanker, damages reach into the astronomical figures in economically and damages affect wide area and many people with break the balance of ecosystem. Recently in Korea, the oil pollution accidents has occurred frequently as growing of oil consumption and it caused large-scale damages to the victim. Oil pollution in Korea offshore takes not only Korean fisherman from their life ground and break the ecosystem but it takes too much time and money to recover. To minimize oil pollution damages, it is necessary to make pre-caution effort as a ship owner and relevant government bodies should endeavor to prevent from more damages. But once oil pollution accidents occurs in territorial sea, compensation for victim is very important. But it is true that compensation is not paid to victim smoothly. So this study aims at the problems of oil pollution compensation to the Korean victim and find the best way to get reasonable compensation.