• Journal of Bio-Environment Control
• /
• v.23 no.3
• /
• pp.212-220
• /
• 2014

This study was conducted to investigate the effect of 1-methylcyclopropene (1-MCP), a known ethylene action inhibitor, on fruit quality and incidence of physiological disorders during simulated marketing period in Asian pears (Pyrus pyrifolia Nakai) of early-season cultivar 'Hanareum' and mid-season cultivar 'Manpungbae'. Flesh firmness was decreased abruptly at 15 days after shelf-life in untreated fruit of early-season cultivar 'Hanareum' which showed less than 19N, although those of 1-MCP-treated fruits were kept high value (>28N) during 15 days of shelf-life. However, there were no distinct firmness changes during 30 days of shelf-life in mid-season cultivar 'Manpungbae' pear. Two pear cultivars did not show any considerable differences in quality indices such as soluble solids content, titratable acidity and skin color during the shelf-life regardless of 1-MCP treatment. The reduction of ethylene production level by 1-MCP treatment did not appeared in 'Hanareum' pear. Meanwhile, 1-MCP treated 'Hanareum' pears showed significantly low respiration rate during shelf-life. On the other hand, the inhibitory effect of 1-MCP was not remarkable in mid-season 'Manpungbae' pears. 1-MCP treatment completely blocked the incidence of physiological disorders including core browning and mealiness symptom during shelf-life only in early-season 'Hanareum' pears, and reduced considerably the pithiness disorder regardless of 1-MCP concentration. Consequently, we concluded that the treatment efficacy of 1-MCP is largely cultivar-dependent and the use of $1{\mu}L{\cdot}L^{-1}$ 1-MCP was recommended for the keeping quality and the prevention of physiological disorders only in early-season Asian pear 'Hanareum'.

• Progress in Medical Physics
• /
• v.20 no.2
• /
• pp.97-105
• /
• 2009

Absorbed dose to water based protocols recommended that plane-parallel chambers be calibrated against calibrated cylindrical chambers in a high energy electron beam with $R_{50}$>7 $g/cm^2$ (E${\gtrsim}$16 MeV). However, such high-energy electron beams are not available at all radiotherapy centers. In this study, we are compared the absorbed dose to water determined according to cross-calibration method in a high energy electron beam of 16 MeV and in electron beam energies of 12 MeV below the cross-calibration quality remark. Absorbed dose were performed for PTW 30013, Wellhofer FC65G Farmer type cylindrical chamber and for PTW 34001, Wellhofer PPC40 Roos type plane-parallel chamber. The cylindrical and the plane-parallel chamber to be calibrated are compared by alternately positioning each at reference depth, $Z_{ret}=0.6R_{50}-0.1$ in water phantom. The $D_W$ of plane-parallel chamber are derived using across-calibration method at high-energy electron beams of 16, 20 MeV. Then a good agreement is obtained the $D_W$ of plane-parallel chamber in 12 MeV. The agreement between 20 MeV and 12 MeV are within 0.2% for IAEA TRS-398.

• The Korean Journal of Petroleum Geology
• /
• v.11 no.1 s.12
• /
• pp.1-8
• /
• 2005

Seventeen exploratory wells have been drilled in the Block VI-1 of offshore Korea, which is located in the southern part or the Ulleung Basin. Gas show has been recognized from most of the wells, and gas and condensate have been accompanied in some wells. Commercial discovery of gas, accompanied by condensate, has been made from Gorae V well. The reservoir gases or the Dolgorae III, Gorae I, and Gorae V wells in the Ulleung Basin mainly consists of hydrocarbon gases (>93%). These gases are thermogenic wet gases which contain more than 96% of the methane and result from the cracking of petroleum or kerogen. Based on the chemistry and composition of the gases and stable isotope data, they seem to be generated from different source rocks. The condensates from the Gorae I and V wells are mostly generated from terrestrial organic matter. Lacustrine organic matter may not play an important role for the generation of these condensates. The condensates from the Gorae V wells consist predominantly of terrestrial organic matter but with minor subsidiary input from marine organic matter. The condensates from Gorse I and V wells may be generated from different source rocks. The thermal maturity level of the condensates from the Gorae V well ranges from early to middle oil generation zone and condensate from Gorae I reaches middle oil window. Correlation or the thermal maturation level of the condensates and organic matter in the sediments reveals that a depth of the generation of liquid hydrocarbons can be inferred to 3,000 m and 3,900 m for the Gorae V and I wells, respectively. Gorae V well, however, did not reach the target depth and the geochemical data of the Gorae I well were obscured due to the severe sediment caving in.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1203-1210
• /
• 2012

As the area of upland crops increase, it is become more important for farmers to understand status of soil water at their own fields due to key role of proper irrigation. In order to estimate daily water balance and soil water content with simple weather data and irrigation records, we have developed the model for estimating water balance and soil water content, called AFKAE0.5, and verified its simulated results comparing with daily change of soil water content observed by soil profile moisture sensors. AFKAE0.5 has two hypothesis before establishing its system. The first is the soil in the model has 300 mm in depth with soil texture. And the second is to simplify water movement between the subjected soil and beneath soil dividing 3 categories which is defined by soil water potential. AFKAE0.5 characterized with determining the amount of upward and downward water between the subjected soil and beneath soil. As a result of simulation of AFKAE0.5 at Gongju region with red pepper cultivation in 2005, the water balance with input minus output is recorded as - 88 mm. the amount of input water as precipitation, irrigation, and upward water is annually 1,043, 0, and 207 mm, on the other, output as evapotranspiration, run-off, and percolation is 831, 309, and 161 mm, respectively.

• Journal of Animal Science and Technology
• /
• v.55 no.1
• /
• pp.25-32
• /
• 2013

The purpose of this study was to investigate the effects of mustard, which contains allyl isothiocyanate, on ruminal fermentation and methane emission in vitro. To this end, diluted ruminal fluid(30ml) was incubated anaerobically at $39^{\circ}C$ or 6, 12, and 24 h with or without seeds or powdered mustard. Either mustard seed or powdered mustard was weighed and serially (0, 3.33, 5.00, 6.67, and 8.33 g/L) mixed with ruminal fluid. Ammonia-N was increased (P < 0.05) by mustard treatment in a dose dependent manner. Regardless of concentration or form, mustard increased (P < 0.05) total VFA content but decreased (P < 0.01) pH compared to control group. Molar proportion of acetate (A) was decreased (P < 0.05) whereas propionate (P) was increased (P < 0.05) by mustard treatment, thereby A:P ratio was decreased (P < 0.05) compared to control group. Total gas production was increased (P < 0.01) in a linear manner by mustard treatment compared to control group. There was no effect of mustard powder, except 8.33 g/L level at 6 h, on methane emission. However, at 24 h, methane emission was reduced (P < 0.05) by 4.77% and 11.54% with 6.67 g/L and 8.33 g/L of mustard seeds supplementation, respectively. Altogether, these results suggest that mustard seeds containing allyl isothiocyanate may reduce methane production without disturbing ruminal fermentation.

• Korean Journal of Psychosomatic Medicine
• /
• v.21 no.1
• /
• pp.3-10
• /
• 2013

Objectives : Many patients diagnosed with cancer suffer from various psychiatric symptoms such as depression, anxiety and insomnia as well as cancer itself. Patients with cancer are more vulnerable to possible adverse events of psychotropic medications. Although antidepressants are widely used among cancer patients, there is little information about tolerability of antidepressants. This study was conducted to compare tolerability of antidepressants in cancer patients referred for psychiatric consultation. Methods : The participants were cancer patients who had been referred to psychiatrist for their psychiatric symptoms. We retrospectively analyzed the data of patients diagnosed with cancer from 9 general hospitals in Korea. The discontinuation rate for a 6 months period after treatment initiation for three antidepressants(Escitalopram, Mirtazapine, Paroxetine) were compared. Results : Antidepressants were prescribed for 96.3% of subjects and Escitalopram 150(47.2%), Mirtazapine 92(28.9%) and Paroxetine 76(23.9%) were prescribed frequently in order There were no significant differences in discontinuation rates among the three antidepressants during the 6 month period after initiation of pharmacotherapy. But there was a difference in discontinuation rates between inpatients versus outpatients(p<0.0001). Conclusions : In a naturalistic setting for the antidepressant treatment for cancer patients, it seems that there are no differences in discontinuation rates among these three antidepressants. It is therefore essential that such interactions are carefully considered when treating patients of antidepressants who already have cancer.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.139-144
• /
• 2009

Recently, the mathematical analysis of stent simulation has been improved, with the help of development of various tool which measure mechanical property and location of stent in artery. The most crucial part of the stent modeling is how to design ideal stent and to evaluate the interaction between stent and artery. While there has been great deal of researches on the evaluation of the expansion, stress distribution, deformation of the stent in terms of the various parameters, few verification through computer simulation has been performed about deformation and stress distribution of the stent. In this study, we have produced the corresponding results between experimental test using Universal Testing Machine and computer simulation for the ideal model of stent. Also, we have analyzed and compared stress distribution of stent in the cases of that with membrane and that without membrane. The results of this study would provide minimum change of plan and good quality for ideal stent replacing damaged artery through the analysis using computer simulation in the early stage of stent design.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.3
• /
• pp.13-19
• /
• 2018

The soldering property of Pb-containing solder(Sn-Pb) and Pb-free solders(Sn-3.0Ag-0.5Cu and Sn-1.0Ag-0.7Cu-1.6Bi-0.2In) for solar combiner box module was compared. The solar combiner box module was composed of voltage and current detecting modules, diode modules, and other modules. In this study, solder paste printability, printing shape inspection, solder joint property, X-ray inspection, and shear force measurements were conducted. For optimization of Pb-free soldering process, step 1 and 2 were divided. In the step 1 process, the printability of Pb-containing and Pb-free solder alloys were estimated by using printing inspector. Then, the relationship between void percentages and shear force has been estimated. Overall, the property of Pb-containing solder was better than two Pb-free solders. In the step 2 process, the property of reflow soldering for the Pb-free solders was evaluated with different reflow peak temperatures. As the peak temperature of the reflow process gradually increased, the void percentage decreased by 2 to 4%, but the shear force did not significantly depend on the reflow peak temperature by a deviation of about 0.5 kgf. Among different surface finishes on PCB, ENIG surface finish was better than OSP and Pb-free solder surface finishes in terms of shear force. In the thermal shock reliability test of the solar combiner box module with a Pb-free solder and OSP surface finish, the change rate of electrical property of the module was almost unchanged within a 0.3% range and the module had a relatively good electrical property after 500 thermal shock cycles.

• Progress in Medical Physics
• /
• v.16 no.2
• /
• pp.62-69
• /
• 2005

The purpose of this study has been performed to investigate the possibility of external audit program using thermoluminescence dosimetry for electron beam in korea. The TLD system consists of LiF powder, type TLD-700 read with a PCL 3 reader. In order to determine a calibration coefficient of the TLD system, the reference dosimeters are irradiated to 2 Gy in a $^{60}CO$ beam at the KFDA The irradiation is performed under reference conditions is water phantom using the IAEA standard holder for TLD of electron beam. The energy correction factor is determined for LiF powder irradiated of dose to water 2 Gy in electron beams of 6, 9, 12, 16 and 20 MeV (Varian CL 2100C). The dose is determined according to the IAEA TRS-398 and by measurement with a PTW Roos type plane-parallel chamber. The TLD for each electron energy are positioned in water at reference depth. In this study, to verify of the accuracy of dose determination by the TLD system are performed through a 'blind' TLD irradiation. The results of blind test are $2.98\%,\;3.39\%\;and\;0.01\%(1\sigma)$ at 9, 16, 20 MeV, respectively. The value generally agrees within the acceptance level of $5\%$ for electron beam. The results of this study prove the possibility of the TLD quality assurance program for electron beams. It has contributed to the improvement of clinical electron dosimetry in radiotherapy centers.

• Progress in Medical Physics
• /
• v.16 no.1
• /
• pp.24-31
• /
• 2005

The stereotactic radiosurgery (SRS) describes a method of delivering a high dose of radiation to a small tar-get volume in the brain, generally in a single fraction, while the dose delivered to the surrounding normal tissue should be minimized. To perform automatic plan of the SRS, a new method of multi-isocenter/shot linear accelerator (linac) and gamma knife (GK) radiosurgery treatment plan was developed, based on a physical lattice structure in target. The optimal radiosurgical plan had been constructed by many beam parameters in a linear accelerator or gamma knife-based radiation therapy. In this work, an isocenter/shot was modeled as a sphere, which is equal to the circular collimator/helmet hole size because the dimension of the 50% isodose level in the dose profile is similar to its size. In a computer-aided system, it accomplished first an automatic arrangement of multi-isocenter/shot considering two parameters such as positions and collimator/helmet sizes for each isocenter/shot. Simultaneously, an irregularly shaped target was approximated by cubic structures through computation of voxel units. The treatment planning method by the technique was evaluated as a dose distribution by dose volume histograms, dose conformity, and dose homogeneity to targets. For irregularly shaped targets, the new method performed optimal multi-isocenter packing, and it only took a few seconds in a computer-aided system. The targets were included in a more than 50% isodose curve. The dose conformity was ordinarily acceptable levels and the dose homogeneity was always less than 2.0, satisfying for various targets referred to Radiation Therapy Oncology Group (RTOG) SRS criteria. In conclusion, this approach by physical lattice structure could be a useful radiosurgical plan without restrictions in the various tumor shapes and the different modality techniques such as linac and GK for SRS.