• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.648-653
• /
• 2011

We propose a new frequency offset estimation technique for multiband orthogonal frequency modulation (MB-OFDM) based ultra wideband (UWB) systems. The proposed frequency offset estimation technique is related to the scheme of Schmidl for channel model 1 (4-1Om NLOS, rms. delay =14.3ns.) using more than two symbols and with alternate symbols. Variance of frequency offset estimate obtained from the proposed frequency offset estimation technique approaches very nearing to Cramer Rao Lower Bound (CRLB) in an AWGN channel. BER performance of the proposed technique is also presented.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1896-1898
• /
• 2001

An offset problem caused by the static parasitic capacitors is analyzed and then some techniques to reduce their effect on the capacitive position sensor are presented. Also new offset compensation technique is proposed that by adjusting the magnitudes of the modulating signals independently, the charge imbalance between electrodes caused by the parasitic capacitors is eliminated without sensor gain variation. Simulation results are given to validate the proposed compensation technique.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1995.06a
• /
• pp.63-67
• /
• 1995

This paper proposes a new frequency offset correction technique for OFDM receivers on a frequency-selective fading channel. The frequency offset in the OFDM signals is known to introduce an interchannel interference among the multiple subcarriers, which degrades the receiver performance severely. In order to reduce the frequency offset, this paper describes an algorithm with two stages: acquisition and tracking. At both stages the algorithm oversamples the received OFDM signals. At the acquisition stage the frequency offset is reduced to half or less than the intercarrier spacing by matching the sign patterns of even and odd samples. Next, at tracking stage the frequency offset is compensated by a frequency detector which is controlled by the correlation of the even and odd sample sets. From the results, it is found that the proposed algorithm can correct the frequency offset even if the initial offset exceeds one half of th eintercairrers spacing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.972-983
• /
• 1996

This paper proposes a new technique for frequency offset correction for OFDM systems on a frequency selective fading channel. Frequency offset in OFDM introduces interchannel interference among the multiple subcarriers of OFDM signal. To compensate the interference, this paper describes an algorithm with two stages:acquisition and tracking. At both stages, the proposed algorithm oversamples the received OFDM signal to obtain a couple of demodulated symbol sets. At acquisition stage the frequency offset is reduced to half or less of the intercarrier spacings by matching the sign pattern of each element of the sets. Next, at tracking stage the frequency offset is corrected with a frequency detector which is controlled by the correlation of the two sets. It is shown that the proposed algorithm can correct the frequency offset in the event of uncertainty in the initial offset that exceeds one half of the intercarrier spacing. In addition, the proposed algorithm is robust to transmitted symbols and channel characteristics by using oversampled symbol sets.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1270-1281
• /
• 1998

Frequency offset in an orthogonal frequency division multiplexing (OFDM) system is known to cause the inter-channel interference (ICI), amplitude and phase distortion of a received signal, resulting in a severe performance degradation of the total system. In this paper, we propose an improved pilot-based masimum likelihood frequency offset estimation technique, which uses the predefined sync-subchannels, and derive the error performance of the proposed frequency offset estimator analytically. The proposed technique improves the performance of the frequency offset estimator by adding up the frequency offset caused by coherent phase changes and averaging out the effect caused by random phase error. It is confirmed by computer simulations that the upper bound of error variance for the proposed frequency offset estimator analytically derived in this paper is correct, and that the proposed estimator has better performance than the previous ones in terms of error variance, tracking range, and time-varying characteristics of a channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.66-78
• /
• 2002

In this paper, we propose a new symbol offset estimation technique for an orthogonal frequency-division multiplexing (OFDM)-based wireless LAN. When both inter-symbol interference (ISI) and inter-channel interference (ICI) do not exist in an OFDM symbol, symbol offsets cause circular shifts in the estimated channel impulse response (CIR) by the amount of symbol offset. Also, the power delay profile of a typical multipath wireless channel can be modeled by exponentially decaying function, and most energy of multipath channel is concentrated at the beginning part of the CIR. Based on these properties, the proposed symbol offset estimation technique estimates the CIR, which is circularly shifted by the amount of symbol offset, and then calculates the partial mean power from the estimated impulse response by using a moving window with a finite length. And, symbol offset can be estimated from the index of a moving window having the maximal partial mean power. The proposed technique can reduce noise effect in the process of the CIR estimation, and remove ISI and ICI using repetitive training symbol structure in time-domain for minimum training overhead. The performances of the proposed symbol offset estimation technique in typical indoor channels are demonstrated by computer simulation.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.483-484
• /
• 2007

In this paper, we describe a chip design technique for instrumentation amplifier using a nested-chopping technique. Conventional chopping technique uses a pair of chopper, but nested chopping technique uses two pairs of chopper to reduce residual offset and 1/f noise. The inner chopper pair removes the 1/f noise, while the outer chopper pair reduces the residual offset. Our instrumentation amplifier using a nested chopping technique has residual offset under 100 nV. We also implement very low frequency filter. Since this filter needs very large RC time constant, we use a technique named 'diode connected PMOS' to increase R with small die area. The total power consumption is 3.1 mW at the supply voltage of 3.3V with the 0.35um general CMOS technology. The die area of implemented chip was $530um{\times}300um$.

• Journal of information and communication convergence engineering
• /
• v.13 no.3
• /
• pp.189-196
• /
• 2015

In this paper, we present a rotating auto-zeroing offset cancellation technique, which can improve the performance of touch screen sensing circuits. Our target touch screen detection method employs multiple continuous sine waves to achieve a high speed for large touch screens. While conventional auto-zeroing schemes cannot handle such continuous signals properly, the proposed scheme does not suffer from switching noise and provides effective offset cancellation for continuous signals. Experimental results show that the proposed technique improves the signal-to-noise ratio by 14 dB compared to a conventional offset cancellation scheme. For the realistic simulation results, we used Cadence SPECTRE with an accurate TSP model and noise source. We also applied an asymmetric device size (10% MOS size mismatch) to the OP Amp design in order to measure the effectiveness of offset cancellation. We implemented the proposed circuit as part of a touch screen controller system-on-chip by using a Magnachip/SK Hynix 0.18-µm complementary metal-oxide semiconductor (CMOS) process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.684-691
• /
• 2001

In this paper, the BER performance of OFDM/M-ary PSK systems is analyzed with considering carrier-frequency offset and TCM technique, which encodes and modulations simultaneously, is adopted to OFDWM-ary PSK systems for compensation of performance degradation according to carrier-frequency offset. As a result of analysis, the error performance of OFDM/M-ary PSK systems is degraded as the frequency offset is increased. And the frequency offset should be below 0.025 in order to achieve $BER= 10^{-3}$ with $E_b/N_o$ of 10 dB. Especially, when the TCM technique is adopted to OFDM/M-ary PSK systems, the performance improvement of about 4 dB is obtained in terms of $E_b/N_o$.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.160-163
• /
• 2000

In this paper, we propose an efficient technique to minimize the input offset of a dynamic latch comparator. We analyzed offset due to charge injection mismatching and unwanted positive feedback during sampling phase. The last one was only considered in the previous works. Based on the analysis, we proposed a modified dynamic latch with initialization switch. The proposed circuit was simulated using 0.65$\mu\textrm{m}$ CMOS process parameter with 5v supply. The simulation results showed that the input offset is less than 5mv at 200㎒ sampling frequency and the input offset is improved about 80% compared with previous work in 5k$\Omega$ input resistance.