• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1275-1278
• /
• 2003

This research describes a image-processing technique for the scratch detecting algorithm for ITO coated glass. The light emitter efficiency of Organic EL has a failing-off in quality due to many causes. One of the many causes was the defects of the surface in ITO coated glass. We use the logical level thresholding method for binarization of gray-scaled glass image. This method is useful to the algorithm for detecting scratch of ITO coated glass automatically without need of any prior information of manual fine tuning of parameters.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.697-700
• /
• 1999

This Paper presents the design, fabrication, analysis of the measured date of a voltage controlled oscillator(VCO) for the application of Personal Communication Systems. Main VCO circuit consists of self biased emitter resonating circuit with microstrip line resonator on FR4 epoxy substrate. A varactor diode is used for 90MHz frequency tuning with center frequency of 1635MHz Phase noise of -114.67㏈C/Hz at 100KHz off set has been achieved with 3.3 V supply. The size of the fabricated VCO circuit is 1.25 cm$\times$ 1.25 cm.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1025-1030
• /
• 2009

It is known that the classical tuning formula for typical PID controllers in general provides unsatisfactory results for industrial plants where the time delay exceeds the dominant lag time. For this reason, alternative strategies have been studied in order to cope with this problem and the most popular scheme is the Smith Predictor(SP). In this paper, the dynamic model of a unit apartment in the district heating system, which is the control process effected by the dead-time, is developed, and the on/off room temperature control method with the SP simulate using Matlab-Simulink. The simulation results show that the SP works effectively in outdoor temperature variation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.377-383
• /
• 2011

This paper reports the filtered velocity feedback (FVF) controller to reduce the acoustic power from clamped beams. The instability problem due to the non-collocated sensor/actuator configuration when using PZT actuator should be resolved. The roll-off property of the FVF controller at high frequency helps to alleviate the instability. The dynamics of clamped beams under forces and moments pair and the FVF controller are first formulated. The formulation of the sound radiated power is followed. The open loop transfer function (OLTF) synthesized with 100 modes is used to determine the stability of the control system. The control performance is finally estimated. The levels of the vibration and the sound radiated power are reduced in the wide band below the tuning mode of the FVF controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2655-2657
• /
• 2000

this paper suggests a genetic algorithms combining simulated annealing for PID factor tunning. This paper made Off-Line control parameter tuning of the DC servo motor for the speed, In this paper new method to design PID controller through proposed genetic algorithm. Two experiments compared both the PID controller using genetic algorithms and PID controller using proposed genetic algorithm for a DC-servo motor. The result of two experiments was safty higher PID controller using proposed genetic algorithm than PID controller using genetic algorithm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.724-729
• /
• 2001

This paper discusses the composition of the theory of reinforcement learning, which is applied in real-time learning, and evolutionary strategy, which proves its the superiority in the finding of the optimal solution at the off-line learning method. The individuals are reduced in order to learn the evolutionary strategy in real-time, and new method that guarantee the convergence of evolutionary mutations are proposed. It possible to control the control object varied as time changes. As the state value of the control object is generated, applied evolutionary strategy each sampling time because the learning process of an estimation, selection, mutation in real-time. These algorithms can be applied, the people who do not have knowledge about the technical tuning of dynamic systems could design the controller or problems in which the characteristics of the system dynamics are slightly varied as time changes. In the future, studies are needed on the proof of the theory through experiments and the characteristic considerations of the robustness against the outside disturbances.

• 항공우주시스템공학회지
• /
• 제6권2호
• /
• pp.23-27
• /
• 2012

The evaluation of simulation models against ADS-33 quantitative rotorcraft handling qualities metrics has, in the past, been a time consuming effort, involving many individual analyses in both the time and frequency domains. Manual tuning of control system parameters to meet handling qualities and performance specifications has been cumbersome and complicated. Performing rigorous trade-off studies for numerous variations in the control system is too time consuming to be practicable. With the complex interaction of time- and frequency based specifications for the closed- and broken-loop responses, it is difficult to know if the design makes the most effective use of the available control power. The Control Designer's Unified Interface (CONDUIT) software makes possible rapid optimization and trade-offs of design configurations against handling qualities specifications.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.260-265
• /
• 1996

Active control of forced vibration response of a fixed-fixed beam implementing PZT sensor/actuator was conducted. Among various control scheme, PPF control was chosen due to its amenability and natural robustness. For a single frequency excitation, the PPF control provided reasonable controllability with the appropriate damping ratio of the compensator. Without increasing actuator voltage, best controllability can be obtained by the exact tuning between the natural frequency of the structure and the cut-off frequency of the compensator. Even the multi-frequency excitation, the PPF provided good vibration suppression for corresponding mode of interest, even though residual modes should be controlled with independent compensators for each mode.

• 전자공학회논문지C
• /
• 제35C권6호
• /
• pp.30-38
• /
• 1998

본 논문에서는 능동필터 설계시 기본 블록으로 이용될 수 있으며, 저전압 고주파에서 동작 가능한 새로운 구조의 CMOS 전류모드 적분기를 제안하였다. 더불어 전압조절을 통해 그 이득과 주파수를 제어할 수 있는 트랜스컨덕턴스 제어회로를 설계하였다. 제안된 적분기는 CMOS 상보형 회로로 구성하였으며, 따라서 적분기의 단위이득주파수에 영향을 주는 적분기의 트랜스컨덕턴스를 증가 시켰다. 제안된 적분기의 단위이득 주파수는 NMOS-gm을 가지는 기존의 적분기에 비하여 두 배 가까이 증가되었다. 또한 트랜스컨덕턴스 제어회로를 이용하여 능동필터의 공정시 나타날 수 있는 오차를 줄이고, 그 용도에 따라 주파수와 이득제어를 가능하게 하였다. 이의 응용회로로서 3차 체비셰프 저역필터를 0.8㎛ CMOS 파라메터를 이용하여 설계하였으며, 이러한 결과들은 소신호 해석 및 0.8㎛ 공정 파라미터를 갖는 HSPICE 시뮬레이션을 통하여 검증되었다.

• 대한전자공학회논문지TC
• /
• 제44권7호통권361호
• /
• pp.7-11
• /
• 2007

본 논문에서는 다중밴드 직접 변환 수신기를 위한 Octa-Phase 전압 제어 발진기를 제안하였다. Octa-Phase 신호와 저 위상잡음을 얻기 위해 4개의 LC VCO를 직렬 커플링 트랜지스터를 이용해 연결하였다. 멀티 밴드 특성을 얻기 위해 밴드 튜닝 회로가 제안되었다. MOS 스위치가 켜짐/꺼짐에 따라서 주파수 범위는 변화한다. 2개의 veractor를 사용해 VCO의 발진 주파수의 공정상의 오차를 최소화하였다. 본 논문에서는 0.18 um CMOS 공정을 이용해 발진기를 설계하였다. 측정 결과 1.8V 공급전압에 12mA의 전류를 소모하였고, $885MHz^{\sim}1342MHz$ 사이의 범위에서 동작하여 3개의 표준(CDMA 20001x, WCDMA, WiBro)에서의 sub-harmonic 혼합기를 구동시킬 수 있는 동작 범위를 만족시킨다. 측정된 위상잡음은 각각 CDMA 2000 1x 대역에서는 -105dBc@100kHz, WCDMA 대역에서는 -115dBc@1MHz, WiBro 대역에서는 -130dBc@10MHz으로 나타났다.