• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.286-289
• /
• 2006

Temporal dual gamma drive technology employing the 120Hz refresh rate was developed to enhance the off-axis viewing quality in patterned vertical alignment mode. The color shift ${\Delta}u'v'$ from on-axis to off-axis (60 deg.) for pale orange color, (R,G,B) = (196,124,96), was below 0.01, and the power exponent of gamma curve for off-axis viewing angle (60 deg.) was about 1.8, when the gamma curve for on-axis was set with power exponent of 2.4. The off-axis image distortion index was below 0.180 in contrast to the normal case ${\sim}0.23$. To elevate the response speed of liquid crystal in the intra-frame, the voltage below threshold voltage of liquid crystals was used.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.13 no.2
• /
• pp.59-65
• /
• 1988

This paper discusses the problem of coordinating aggregate planning and production schedules, minimizing the combined set-up inventory and capacity costs. In this study, by using the relation of fixed production quantity and the number of set-up we develop a heuristirc procedure of solving the discrete demand, fixed production quantity, variable capacity problem. First, we obtain the trade-off between set-up cost and capacity cost, then search the point minimizing the combined inventory and capacity costs.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.4
• /
• pp.211-222
• /
• 2009

The fisheries resources by a set net in the coastal waters off Neungpo, Goeje Island from 2003 to 2004 were studied to determine species composition and catch variation. The main fishing period by a set net were from April to December in 2003 and from May to December in 2004. A total weight of 48 species caught through the survey period was 540,688.0kg. Most of them were 44 species of fishes and a few were 4 species of cephalopods. Dominant species was Trachurus japonicus accounting to 57.5% in total catch. Sub-dominant species were Trichiurus lepturus(12.9%), Engraulis japonicus(10.6%), Scomber japonicus(6.9%), Clupea pallasii(4.5%), Todarodes pacificus(2.8%) and Parapristipoma trilineaturm(1.3%). The remnant species showed a low catch, indicating the catch had less than 1% in total, respectively. T. japonicus and T. lepturus were caught throughout the survey period, but C. pallasii, Gadus macrocephalus, Oncorhynchus keta in low temperature season and Thunnus obesus in high temperature season. The fishing ground temperature was 11.7-24.0${^{\circ}C}$ in range and the catch by a set net was higher in autumn than in spring and in summer with the variation of fishing ground temperature. The annual catch by a set net was much higher in 2004 than in 2003 due to high temperature(>17${^{\circ}C}$) and the recruitment of T. japonicus from offshore seas. Therefore we concluded that the catch of Neungpo fishing ground by a set net was highly related to the variation of T. japonicus catch with fishing ground temperature.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.1
• /
• pp.7-18
• /
• 2017

Purpose: A QA Set was established to verify the movement accuracy of image-guided 6DoF Couch and to evaluate its usefulness. Materials and Methods: Two sets of linear accelerators equipped with 6DoF Couch and CBCT were used. Using the established QA Set, each CBCT image was obtained over 15 times through the Penta-Guide Phantom installed with off-set shift values along six translational (Translation; TX, TY, TZ) and rotational (Rotation, Pitch; RX, Roll; RY, Yaw; RZ) directions. Using this method, we compared the reference image and the registration image, and we analyzed the error calculated by measuring the positional accuracy of the modified 6DoF Couch. Results: The Air Cavity corresponding to the Pixel of the reference image and the registration image were all contained between 30 and 66, and the revealing high registration accuracy. Error between the modified off-set value of 6DoF Couch and the measured value along translational directions were $0.25{\pm}0.18mm$ in the TX direction, $0.25{\pm}0.25mm$ in the TY direction, and $0.36{\pm}0.2mm$ in the TZ direction. Misalignments along the rotational axis were $0.18{\pm}0.08^{\circ}$ in the RX direction, $0.26{\pm}0.09^{\circ}$ in the RY direction, and $0.11{\pm}0.08^{\circ}$ in the RZ direction, it was corrected precisely for any value. Conclusion: Using the YCC QA Set, we were able to verify the error of 6DoF Couch along both the translational and rotational directions in a very simple method. This system would be useful in performing Daily IGRT QA of 6DoF Couch.

• YAKHAK HOEJI
• /
• v.58 no.2
• /
• pp.112-124
• /
• 2014

This study aimed to develop a regulation system for off-label drug use to secure the safe use of marketed drugs. We searched governmental documents for national and global regulating systems of off-label drug uses and a body of academic literature to explore current regulating trends. We included European Union, United Kingdom, United States of America, Australia and Japan, and critically reviewed the regulation of off-label drug use in four issues, which were a regulatory structure, safety control before and after off-label use, and information management. The findings of the present investigation called for several measures in off-label drug uses: enhancing prescribers' self-regulation, providing up-to-date information to prescribers for evidence-based practice and to patients for their informed consent, making evidence with scientific rigor, building an official registering process for off-label use in good quality and extending the role of pharmaceutical industry in pharmacovigilance. At last, we proposed a new system so as to regulate and evaluate off-label drug uses both at national and institutional level. In the new system, we suggested a clear-cut definition for clinical evidence that applicants would submit. We newly introduced an official 'Off-Label Drug Use Report' to evaluate the safety and clinical efficacy of a given off-label drug use. In addition, we developed an algorism of the regulation of off-label drug use within an institution to help set up the culture of evidence-based practices in off-label drug uses.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.2
• /
• pp.92-97
• /
• 2011

Vehicle lightings are very important for safe driving during night time. Since the eye recovery time after an exposure to oncoming headlights would take after several seconds, the aiming point of vehicle head lamps have to pass safety requirements. Despite the fact that vehicle inclination is variable with vehicle load conditions, the head lamps aiming point is usually fixed at a constant position which is set by car manufacturer. Consequently, vehicle head lamps under varying load conditions often make people in the opposing vehicle uncomfortable, and even worse, can cause an accident. This paper presents an active vehicle lighting mechanism to automatically adjust its aiming point, or cut-off line, in order to compensate the change in vehicle inclination resulting from load variations. The effectiveness of the proposed method is demonstrated through a set of simulations and experiments with a real vehicle.

• Journal of Mechanical Science and Technology
• /
• v.20 no.7
• /
• pp.1030-1042
• /
• 2006

An experimental study has been performed to investigate the off-take phenomena at the header-feeder systems (horizontal header pipe with multiple feeder branch pipes) in a CANDU (CANadian Deuterium Uranium) reactor with the branch orientation varies ${\pm}36^{\circ}\;or\;{\pm}72^{\circ}$. In order to evaluate the applicability of the conventional correlations used in the safety analysis code, RELAP5-Mod3, the test facility is designed with the 1/2 scale of the. CANDU 6. It was found that the data set for the top, bottom and side branches are in a good agreement with the correlations used. However, for the specific angled branches, ${\pm}36^{\circ}\;and\;{\pm}72^{\circ}$, the onsets of off-take data and quality data showed large deviation with the conventional model inside RELAP5-MOD3. Furthermore, based on the uncertainty analysis, the conventional 2.5 power law needs to be modified. The present experimental data set can be useful for the construction of the general correlation considering the arbitrary branch orientation.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.755-765
• /
• 2015

A thermostatically controlled load (TCL) can be one of the most appropriate resources for demand response (DR) in a smart grid environment. DR capability can be effectively implemented in a TCL with various intelligent control methods. However, because traditional on-off control is still a commonly used method in a TCL, it is useful to develop a method for adding DR capability to the TCL with an existing on-off controller. As a specific realization of supervisory control for implementing DR capability in the TCL, two methods are proposed - a method involving the changing of a set point and a method involving the paralleling of an identified system without delay. The proposed methods are analyzed through the simulations with an electric heater for different power consumption levels in the on-state. Considerable cost benefit can be achieved with the proposed methods when compared with the case without DR. In addition, the observations suggest that a medium power consumption level, instead of the maximum power, in the on-state should be used for consistently obtaining the cost benefit without severe temperature deviation from the specified temperature range for DR.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.5
• /
• pp.240-245
• /
• 2009

The Friction Stir Welding (FSW) has mainly been used for making butt joints in Al alloys. Development of FSW would expand the number of applications. The FSW is a relatively solid-state joining process. This study possibility of a welding between C1020 and Al6063 by means of FSW has fundamentally clarified. The primary process parameters, such as a rotating speed, rotating direction of tool and off-set of pin periphery from materials interface were optimize, respectively.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.1
• /
• pp.53-61
• /
• 2001

This study was carried out to evaluate the effect of coating pigments on the printability by investigating the pore structure of casting layer such as the number, size and distribution of pores and the pore rate. The coating structure was mainly determined by the interaction between pigment and binder. It means that the structure of pores was chiefly affected by the shape and size distribution of pigments and their packing rate. The physical properties of pore have close relationships with ink set-off, the speed of ink penetration and printing gloss. The results suggested that the rate and number of pores were greatly affected by the particle size distribution and shape of pigments. The rate of pore increased with the reduction of particle size distribution of pigments. Calcite was effective to improve greatly the printability of coated paper.