• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.1
• /
• pp.1-6
• /
• 2016

Recently, proportion of the induction motor load is gradually increased. When a contingency in the power systems, it has been discovered phenomenon that the voltage is delayed recover caused mechanical characteristics of the induction motor load. It can be a serious impact on the voltage stability of the power system considering induction motor load. The scheme to mitigate this phenomenon tripping off the motors to prevent voltage drop and delayed voltage recovery on the load demand side. Fault induced delayed voltage recovery phenomenon is caused by stalling of small induction motor load in transmission level contingencies. In this paper, fault induced delayed voltage recovery phenomenon mitigation method implementation under voltage load shedding on the korean power system considering induction motor load.

• 유체기계공업학회:학술대회논문집
• /
• 2000.12a
• /
• pp.305-311
• /
• 2000

A commercial CFD code is used to compute the 3-D viscous flow field within the impeller o( a centrifugal pump. Several preliminary numerical calculations are carried out to determine the influence of the parameters such as the grid systems, the numerical schemes, the turbulence models and the shape of the vaneless diffusers at the design flow rate. The results of the preliminary study are used for the calculation of the off-design flow conditions. The circumferentially averaged results such as the radial and tangential velocities, the exit flow angle, the slip factor, the static pressure and the total pressure are compared with the experimental data at the impeller exit to discuss the influence of the prescribed parameters.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.2
• /
• pp.18-23
• /
• 2010

This paper presents a procedure for the aerodynamic and aeroacoustic characteristics of a sirocco fan. For the aerodynamic and aeroacoustic analyses of the sirocco fan, three-dimensional steady and unsteady Reynolds-averaged Navier-Stokes equations are solved with a shear stress transport turbulence model for turbulence closure. The flow analyses were performed on a hexahedral grid using a finite-volume solver. The validation of the numerical results is performed by comparing with experimental data for the pressure, efficiency and power. The internal flow analyses of the sirocco fan are performed to understand the unstable flow phenomenon on the casing for the wall pressure and internal flow characteristics at each position. It was found that fluctuation of pressure and locally concentrated noise source are observed near the cut-off and expansion regions of the casing.

• Journal of electromagnetic engineering and science
• /
• v.15 no.4
• /
• pp.206-212
• /
• 2015

This paper introduces new wideband antenna-filter-antenna (AFA) uniform arrays that can be utilized as frequency selective surfaces (FSS) with low loss and sharp roll-off response, which are highly desirable characteristics for millimeter wave applications. The design adopts a simple 3-layer single polarization structure consisting of two patch antennas and a resonator. Both simulations and measurements are used to characterize the performances of the proposed design. Overall results show 18.5% 10-dB bandwidth. For the targeted band the insertion loss is less than 0.2 dB. Possible applications include quasi-optical amps, grid mixers and radomes for aircraft radar antennas.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.129-130
• /
• 2010

Design of turbo-compressors has been considered to be a high-tech which only a few early industrialized countries could do efficiently since it requires not only deep understanding of high level gas dynamics and complex fluid dynamics but also accumulation of experiences in the feedback of expensive manufacturing and difficult testing to the design theory and empirical design coefficients. CFturbo is the turbomachinery design software which incorporates traditional well formulated German design technology and latest software technology of 3-dimensional graphics. Fine/Turbo is a powerful tubomachinery-oriented CFD package with quality structured grid topology templates for almost all the tubomachinery configurations for easy, fast and accurate CFD analysis. Rapid and effcient process off turbo-compressor R&D is setup with the combination of CFturbo and Fine/Turbo.

• Journal of KSNVE
• /
• v.8 no.1
• /
• pp.122-131
• /
• 1998

Internal and external acoustic fields of the engine inlet are calculated by using a finite element method. The far fields non reflecting boundary condition is enforced by using a wave envelope element, which is a kind of infinite element. The geometry is assumed an axisymetric duct. Sources of the fan are modeled by the Tyler and Sofrin's theory. Effects of uniformly moving medium are considered. A pulsating sphere and an oscillating piston problem are calculated to verify the external problems, and compared with exact solutions. When the wave envelope element is applied at the far boundary, the calculated finite element solutions show good agreements with the exact solutions. The engine inlet is solved with the combined internal and external grid. The cut-off phenomena on engine inlet duct are observed.

• Proceedings of the IEEK Conference
• /
• 2003.11b
• /
• pp.3-6
• /
• 2003

In this paper, we conduct a performance analysis for the composite scheme that is obtained by combining the data distribution and the data replication schemes usually used for the implementation of distributed directory service systems. The analysis results reveal that the composite model is a viable option to overcome the performance trade-off between the data distribution and the data replication model. In this paper, we present the performance model developed for the composite model by appling queuing modelling. Using the performance model, performance values for a variety of system execution environments are suggested which enable us to bring an efficient design for high performance distributed directories.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.572-580
• /
• 2013

Power metering and monitoring system is a basic element of Smart Grid technology. This paper proposes a new Non-Intrusive Load Monitoring (NILM) method for a residential buildings sector using the measured total active power consumption. Home electrical appliances are classified by ON/OFF state models, Multi-state models, and Composite models according to their operational characteristics observed by experiments. In order to disaggregate the operation and the power consumption of each model, an algorithm which includes a switching function, a truth table matrix, and a matching process is presented. Typical profiles of each appliances and disaggregation results are shown and classified. To improve the accuracy, a Time Lagging (TL) algorithm and a Permanent-On model (PO) algorithm are additionally proposed. The method is validated as comparing the simulation results to the experimental ones with high accuracy.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.35-36
• /
• 2010

This paper describes a new method for the seamless operation mode transfer of a PCS. The proposed method provides reduced STS turn off time after line fault and smooth mode change between current and voltage control of the PCS. The usefulness of the method is verified through simulations.

• International Journal of Contents
• /
• v.7 no.2
• /
• pp.1-5
• /
• 2011

Allocation of computing resources is a crucial issue when dealing with a huge number of tasks to be completed according to a given deadline and cost constraints. The task scheduling to several resources (e.g. grid, cloud or a supercomputer) with different characteristics is not trivial, especially if a trade-off in terms of time and cost is considered. We propose an allocation approach able to fulfill the given requirements about time and cost through the use of optimizing techniques and an adaptive behavior. Simulated productions of tasks have been run in order to evaluate the characteristics of the proposed approach.