• 전기학회논문지
• /
• 제67권10호
• /
• pp.1370-1374
• /
• 2018

A heterojunction $SnS_2/p-Si$ photodetector was fabricated by RF magnetron sputtering system. $SnS_2$ was formed with 2-inch $SnS_2$ target. Al was applied as the front and the back metal contacts. Rapid thermal process was conducted at $500^{\circ}C$ to enhance the contact quality. 2D material such as $SnS_2$, MoS2 is very attractive in various fields such as field effect transistors (FET), photovoltaic fields such as photovoltaic devices, optical sensors and gas sensors. 2D material can play a significant role in the development of high performance sensors, especially due to the advantages of large surface area, nanoscale thickness and easy surface treatment. Especially, $SnS_2$ has a indirect bandgap in the single and bulk states and its value is 2 eV-2.6 eV which is considerably larger than that of the other 2D material. The large bandgap of $SnS_2$ offers the advantage for the large on-off current ratio and low leakage current. The $SnS_2/p-Si$ photodetector clearly shows the current rectification when the thickness of $SnS_2$ is 80 nm compared to when it is 135 nm. The highest photocurrent is $19.73{\mu}A$ at the wavelength of 740 nm with $SnS_2$ thickness of 80 nm. The combination of 2D materials with Si may enhance the Si photoelectric device performance with controlling the thickness of 2D layer.

• 터널과지하공간
• /
• 제16권4호
• /
• pp.296-306
• /
• 2006

국내 천연가스 수요의 동고하저의 수요패턴과 도입패턴의 불일치 및 저장시설의 한계 등으로 수급관리의 어려움이 내재하고 있고 LNG 생산지 사고 등 도입선 공급불안 요인이 상존하고 있다. 따라서 LNG의 안정적 수급관리를 위하여 장기간 저장이 가능한 대규모 저장시설의 확보가 매우 중요한 실정이다. 이에 한국지질자원연구원에서 Pilot Plant 운영을 통하여 검증된 복공식 저장공동기술의 국내 적용성 여부를 검토하고자 한다. 이 기술은 기존의 지상식과 반지하식에 비하여 경제성 안전성 및 환경친화성 등에 유리하며 특히 기화율 저감으로 인한 LNG 장기 저장이 가능하다는 장점을 가지고 있다. 따라서 LNG 지하공동 비축시스템의 국내 도입을 위하여 지하저장기술의 기술적 타당성 건설 및 운영비용 등에 대하여 살펴보았다.

• 대한기계학회논문집B
• /
• 제35권5호
• /
• pp.445-450
• /
• 2011

본 연구에서는 상압 플라즈마를 발생시켜 고분자 재료의 표면 자유에너지와 접착력의 변화를 조사하였다. 고분자 재질은 PC, PET, EVA 를 사용하였으며 표면자유에너지 변화를 관찰하기 위해 Di water 와 diiodomethane을 사용하여 접촉각을 측정하였다. 플라즈마 처리에 따른 접착력의 변화를 관찰하기 위해 PET 필름에 고분자 필름을 부착시켜 $180^{\circ}$ peel test 를 수행하였다. 그 결과 PET 필름의 표면자유에너지 및 접착력이 가장 큰 것을 확인할 수 있었으며, 상압 플라즈마 표면처리 공정은 필름 계면의 접착력을 크게 증가시켜 주는 것을 확인하였다.

• 센서학회지
• /
• 제23권5호
• /
• pp.337-341
• /
• 2014

For various additives doped-$VO_2$ critical temperature sensors using the nature of semiconductor to metal transition, the crystallinity, microstructure, and temperature vs. resistance characteristics were systematically investigated. As a starting material of $VO_2$ sensor, vanadium pentoxide ($V_2O_5$) powders were used, and CaO, SrO, $Bi_2O_3$, $TiO_2$, and PbO dopants were used, respectively. The $V_2O_5$ powders with dopants were mixed with a vehicle to form paste. This paste was silk screen-printed on $Al_2O_3$ substrates and then $V_2O_5$-based thick films were heat-treated at $500^{\circ}C$ for 2 hours in $N_2$ gas atmosphere for the reduction to $VO_2$. From X-ray diffraction analysis, $VO_2$ phases for pure $VO_2$, and CaO and SrO-doped $VO_2$ thick films were confirmed and their grain sizes were 0.57 to $0.59{\mu}m$. The on/off resistance ratio of the $VO_2$ sensor in phase transition temperature range was $5.3{\times}10^3$ and that of the 0.5 wt.% CaO-doped $VO_2$ sensor was $5.46{\times}10^3$. The presented critical temperature sensors could be commercialized for fire-protection and control systems.

• 한국추진공학회지
• /
• 제10권4호
• /
• pp.100-108
• /
• 2006

실험적인 연구가 흡입구와 배기구 성능을 평가하는 일반적인 방법이나 이는 고가이며 많은 시간이 소요된다. 따라서 소요 시간과 계산을 절약하는 방법으로 전산 유체 역학적 수치 모사가 실험적 연구로 대체할 수 있다. 그러므로 본 연구는 3차원 형상 모델을 이용하여 흡입구와 배기구의 구성품 성능을 연구하는 것을 목표로 하였다. 본 연구에서 특정한 흡입구 및 배기구를 유동가시화 기능을 갖는 전산유체 역학적 프로그램을 이용하여 손실 및 유동장을 예측하기 위해 모델링 및 해석이 수행되었다. 모델링된 기하학적 자료를 필요로 하는 과정이 설계과정에서 설계 개선 가능성을 위해 요구되었다. 또한 특정 터보축 엔진의 장착 성능이 예측된 흡입구, 배기구 및 기타 보기 손실을 가지고 평가되었다.

• Nuclear Engineering and Technology
• /
• 제5권2호
• /
• pp.103-114
• /
• 1973

본 실험은 방사선을 이용하여 Polyester 직포의 흡수성과 염색성 그리고 대전성을 증진시키기 위한 연구로서 실온하에서 함침법으로 Acrylic acid또는 4-vinylpyridine을 Polyester 직포에 접목시켰다. Polyester 직포를 25$^{\circ}$또는 7$0^{\circ}C$에서 Acrylic acid나 Acrylic acid와 4-vinylpyridine의 emulsion 용액에 함침시켰으며 함침된 Polyester 직포를 질소깨스 존재 하에서 Co-60의 l-rays로 조사시켰다. Acrylic acid가 접목된 Polyester 직포를 Sodium carbonate, Calcium acetate 또는 Potassium persulfate로 처리하였을 때 흡수율은 더욱 증가하였으며 직포 표면에 형성된 polyacrylic acid 는 0.1% NaoH 용액으로 대부분 추출되었다. 4-vinylpyridine과 Acrylic acid의 혼합용액을 함침용액으로 사용하였을 경우 4-VP/AA의 비율과 방사선 선량이 커짐에 따라 접목율은 점점 증가함을 보여주었다. 여러가지로 처리된 Polyester 직포 표면에 물방울을 떨어 뜨렸을 때의 Contact angle을 측정하여 보니 접목율이 증가함에 따라 대전성은 감소하였다. Acryli acid가 접목된 Polyester 섬유를 Salt로 처리하여 전자 현미경으로 관찰하여 본 결과 일련의 무정형 형태로 결합되어 있었다.

• 한국환경과학회지
• /
• 제15권4호
• /
• pp.293-304
• /
• 2006

Sea water samples collected in August, 1994 from 20 stations in the Kwangyang Bay were analyzed by gas chromatography/mass spectrometry-selected ion monitoring (GC/MS-SIM) to investigate persistence and distribution pattern of four organophosphorus pesticides (DDVP, Diazinon, IBP, EDDP). Except for IBP, the contamination by DDVP, Diazinon, and EDDP in marine aquatic environment in Korea has not been reported previously. In this study, however, all these four pesticides were detected in all stations (except DDVP) and their concentrations were in ng/L level. The concentrations ranged from detection limit to 15.3ng/L for DDVP, 1.8-27.7ng/L for Diazinon, 7.3-63.5ng/L for IBP, and 22.2-1100.1ng/L for EDDP. It is noteworthy that the measured concentrations of IBP and EDDP in this study would be much lower than usual, since the use of IBP and EDDP was less than 50% of average annual consumption due to unusually dry and hot weather condition in the summer of 1994. It was very surprising to find that the highest concentrations of organophosphorus pesticides were observed at stations near Daesa Streamlet instead of Seomjin River, which has more point source of the pesticides. This result suggests that the small river discharge during heavy ram period in summer can give harmful effect on marine biota (both wild and aqua-cultured) with its organophosphorus pesticide residue, despite of their short residence time in aquatic environment. In order to protect the marine life properly from acute toxicity of the organophosphorus pesticides, it needs to be emphasized that monitoring the level of agricultural pesticides in river run-off should be done during active consumption period rather at regular intervals.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.208-208
• /
• 2010

Indium zinc tin oxide (IZTO) thin films were studied as a possible alternative to indium tin oxide (ITO) films for providing low-cost transparent conducting oxide (TCO) for thin film photovoltaic devices. IZTO films were deposited onto glass substrates at room temperature. A dc/rf magnetron co-sputtering system equipped with a ceramic target of the same composition was used to deposit TCO films. Earlier studies showed that the resistivity value of $In_{0.6}Zn_{0.2}Sn_{0.2}O_{1.5}$ (IZTO20) films could be lowered to approximately $6{\times}10^{-4}ohm{\cdot}cm$ without sacrificing optical transparency and still maintaining amorphous structure through the optimization of process variables. The growth rate was kept at about 8 nm/min while the oxygen-to-argon pressure ratio varied from 0% to 7.5%. As-deposited films were always amorphous and showed strong oxygen pressure dependence of electrical resistivity and electron concentration values. Influence of forming gas anneal (FGA) at medium temperatures was also studied and proven effective in improving electrical properties. In this study, the chemical composition of the targets and the films varied around the $In_{0.6}Zn_{0.2}Sn_{0.2}O_{1.5}$ (IZTO20). It was the main objective of this paper to investigate how off-stoichiometry affected TCO characteristics including electrical resistivity and optical transmission. In addition to the composition effect, we have also studied how film properties changed with processing variables. IZTO thin films have shown their potential as a possible alternative to ITO thin films, in such way that they could be adopted in some applications where currently ITO and IZO thin films are being used. Our experimental results are compared to those obtained for commercial ITO thin films from solar cell application view point.

• 천문학회보
• /
• 제37권1호
• /
• pp.73.2-73.2
• /
• 2012

The far ultraviolet (FUV) wavelength (900-1750A) range includes a wealth of important astrophysical information related to the cooling of hot gas, fluorescent emission from H2 molecules, and starlight scattered off dust particles. Among these, we would like to focus on the scattered emission of the central star by dust with the example of the FUV halo surrounding ${\alpha}$ Vir (Spica). While scattering properties of dust have been studied with the GALEX data, the improved dataset of STSAT-1 revealed many detailed structures of this interesting region. For example, the FUV continuum map obtained from the STSAT-1 observations shows enhanced emission in the southern part of the Spica halo region, where the dust level is also high. In fact, the FUV continuum intensity is seen to have a good correlation with the IRAS 100${\mu}m$ emission data. It is also seen that the scattered spectrum is softer than the original one emitted by the central star, which is attributed to the increase in the dust-scattering albedo with wavelength. We have developed a Monte Carlo code that simulates dust scattering of light including multiple encounters. The code is applied to the present Spica halo region to obtain the scattering properties such as the albedo and the phase function asymmetry factor.

• Journal of Mechanical Science and Technology
• /
• 제19권11호
• /
• pp.2032-2039
• /
• 2005

The lattice Boltzman method (LBM) and the finite difference-based lattice Boltzmann method (FDLBM) are quite recent approaches for simulating fluid flow, which have been proven as valid and efficient tools in a variety of complex flow problems. They are considered attractive alternatives to conventional finite-difference schemes because they recover the Navier-Stokes equations and are computationally more stable, and easily parallelizable. However, most models of the LBM or FDLBM are for incompressible fluids because of the simplicity of the structure of the model. Although some models for compressible thermal fluids have been introduced, these models are for monatomic gases, and suffer from the instability in calculations. A lattice BGK model based on a finite difference scheme with an internal degree of freedom is employed and it is shown that a diatomic gas such as air is successfully simulated. In this research we present a 2-dimensional edge tone to predict the frequency characteristics of discrete oscillations of a jet-edge feedback cycle by the FDLBM in which any specific heat ratio $\gamma$ can be chosen freely. The jet is chosen long enough in order to guarantee the parabolic velocity profile of a jet at the outlet, and the edge is of an angle of $\alpha$=23$^{o}$. At a stand-off distance w, the edge is inserted along the centerline of the jet, and a sinuous instability wave with real frequency is assumed to be created in the vicinity of the nozzle exit and to propagate towards the downstream. We have succeeded in capturing very small pressure fluctuations resulting from periodic oscillation of the jet around the edge.