• Proceedings of the Korea Association of Information Systems Conference
• /
• 2003.11a
• /
• pp.267-275
• /
• 2003

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1266-1270
• /
• 2006

최근 도시개발이나 주택단지개발사업의 경우 토지이용의 극대화 및 경제적인 측면에서 저류지의 면적을 충분히 확보하기 어려우므로 첨두홍수량 조절방식인 하도외(off-line) 저류지가 검토되고 일부 설치되고 있으며, 증가된 홍수량을 저류지로 전환하는 방법에는 일반적으로 횡월류위어가 이용되고 있다. 현재 off-line 저류지 횡월류량 산정시 사용되고 있는 De Marchi공식의 유량계수를 0.623이라는 고정된 값을 사용하고 있으나, 횡월류위어의 유량계수는 본류 흐름 조건 및 위어의 기하학적 조건에 따라 달라지기 때문에 이에 대한 문제점을 갖고 있다. 또한 횡월류부의 적정폭이 제시되어 있지 않으므로 계획빈도 이상의 수위가 전량 저류지로 유입되는지 이에 대한 실험 및 검증이 요구된다. 본 연구에서는 수리실험을 통하여 설계빈도 이상의 초과홍수량을 전량 월류시킬 목적으로 사용되는 off-line 저류지 횡월류위어의 적정폭을 산정하고, 본류 흐름 조건 및 위어의 기하학적 조건 등을 고려한 횡월류위어의 유량계수를 산정하였다. 적정폭 산정 결과 본 실험조건에서는 횡월류 위어폭이 본류폭의 6배인 3.6m(L/B=6.0)이상일 때 모든 조건에서 위어정점부 이상의 수위에 대한 유량을 전량 월류시킬 수 있는 것으로 나타났다. L/B=6.0일 때 $Fr_u,\;W/y_u$와 $S_o$를 고려한 중회귀분석을 통해 off-line 저류지에 적합한 횡월류 위어의 유량계수식을 제안하였으며, off-line 저류지의 횡월류위어 설계시 활용할 수 있을 것으로 판단된다.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2089-2092
• /
• 1999

Partial discharge(PD) tests were performed both when the pumped storage generator(rated 13.8kV and 220MVA) was on-line and off-line. This generator has been equipped with 12 bus coupler sensors in directional mode. PD tests were conducted using partial discharge analyzer(PDA), partial discharge meter(PDM) and digital partial discharge detector. PDA showed that the patterns of the normalized quantity number(NQN) and the partial discharge magnitude are in accord with on-line and off-line. The insulation condition was estimated by diagnostic tests(off-line) such as PD magnitude and dissipation factor.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.294-300
• /
• 1996

In hydro-generator, a groundwall insulation of stator windings gradually deteriorates due to mechanical, thermal, electrical and environmental stresses. These stresses combine to result in loose windings, delamination of the stator insulation and/or electrical tracking of the endwinding, all of which can lead to stator insulation failures. Conventionally, off-line tests such as partial discharge measurement, DC/AC current and .DELTA.tan.delta. tests has been used for estimation of winding condition. However, off-line test requires large power supply and generator outage. In addition, major cause of insulation problems such as loose wedges and slot dischages may not be found with off-line diagnoses. This paper introduces the on-line partial discharge measurement techniques using frequency spectrum analyzer(FSA) for the generator stator windings. The experimental results from the UIAM #1 hydro-generator confirms a optimistic application of on-line generator diagnosis method as a reliable tool for evaluation of winding condition.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1731-1734
• /
• 2003

We propose a unmaned integrating control system based-on Windows XP version Off-Line Programming System which can simulate a Robot model in 3D Graphics space in this paper. The robot with 4 and 6 axes modeled SM5 and AM1 respectively were adopted as an objective model. Forward kinematics, inverse kinematics and robot dynamics modeling were included in the developed off-line program. The interface between users and the off-line programming system in the Windows XP's graphic user interface environment was also studied. The developing language is Microsoft Visual C++. Graphic libraries, OpenGL, by silicon Graphics, Inc. were utilized for 3D Graphics.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.319-326
• /
• 2003

We propose a unmaned integrating control system based-on Windows XP version Off-Line Programming System which can simulate a Robot model in 3D Graphics space in this paper. The industrial robot with 4 and 6 axes modeled SM5 and AMI respectively were adopted as an objective model. Forward kinematics, inverse kinematics and robot dynamics modeling were included in the developed off-line program. The interface between users and the off-line programming system in the Windows XP's graphic user interface environment was also studied. The developing language is Microsoft Visual C++. Graphic libraries, OpenGL, by silicon Graphics, Inc. were utilized for 3D Graphics.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.985-988
• /
• 2011

A novel application of a dual-transmission line is proposed to design a lowpass filter (LPF). The proposed structure uses only transmission line elements to produce an equiripple LPF response with sharp roll-off. Design equations are derived using a lossless transmission line model. Controlling the electrical lengths, three transmission-zeros are realized in the stopband to obtain a sharp roll-off rate and wide stopband bandwidth. A single unit microstrip LPF with a 3-dB cut-off frequency at 1.0 GHz having a roll-off of 135 dB/GHz along with a stopband bandwidth of 69.5% is designed for validation.

• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.375-382
• /
• 2007

The multi-driver off-road vehicle drive-line consists of many components, with close connections among them. In order to design and analyze the drive-line efficiently, a modular methodology should be taken. The aim of a modular approach to the modeling of complex systems is to support behavior analysis and simulation in an iterative and thus complex engineering process, by using encapsulated submodels of components and of their interfaces. Multi-driver off-road vehicles are comparatively complicated. The driving-line is an important core part to the vehicle, it has a significant contribution to the performance. Multi-driver off-road vehicles have complex driving-lines, so performance is heavily dependent on the driving-line. A typical off-road vehicle's driving-line system consists of a torque converter, transmission, transfer case and driving-axles, which transfers the power generated by the engine and distributes it effectively to the driving wheels according to the road condition. According to its main function, this paper proposes a modularized approach for design and evaluation of the vehicle's driving-line. It can be used to effectively estimate the performance of the driving-line during the concept design stage. Through an appropriate analysis and assessment method, an optimal design can be reached. This method has been applied to practical vehicle design, it can improve the design efficiency and is convenient to assess and validate the performance of a vehicle, especially of multi-driver off-road vehicles.

• Journal of Distribution Research
• /
• v.8 no.2
• /
• pp.1-18
• /
• 2003

This study has tried an integrated approach toward consumer response difference between the online internet shopping mall and the off-line department store focusing on the moderating role of shopping value according to shopping situation. This study has analyzed consumer behavior differences between online and off-line channel formats in one framework and identified differences in consumer behaviors between the two channel formats. Managerial implications of this paper include measuring the effects of the integration of online and off-line channel and developing multichannel strategy. This paper suggests marketers to develop channel strategies based on customer segmentation criteria reflecting different consumer shopping value between online and off-line channel formats rather than developing strategies based only on the conventional marketing mix.

• Journal of Information Technology Applications and Management
• /
• v.23 no.4
• /
• pp.55-70
• /
• 2016

Recently, development of indoor positioning system and IoT such as beacon makes it possible to collect and analyze each customer's shopping behavior in off-line shopping malls. In this study, we propose a realtime brand recommendation scheme based on each customer's brand visiting history for off-line shopping mall with indoor positioning system. The proposed scheme, which apply collaborative filtering to off-line shopping mall, is composed of training and apply process. The training process is designed to make the base brand network (BBN) using historical transaction data. Then, the scheme yields recommended brands for shopping customers based on their behaviors and BBN in the apply process. In order to verify the performance of the proposed scheme, simulation was conducted using purchase history data from a department store in Korea. Then, the results was compared to the previous scheme. Experimental results showd that the proposed scheme performs brand recommendation effectively in off-line shopping mall.