• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.217-222
• /
• 2015

Longitudinal transmission-line modal theory is applied to analyze the guiding mode characteristics along 1D & 2D grating patterns of plasmonic grating-assisted directional couplers (P-GADC) based on silicon waveguide. By defining supermodes amenable to rigorous analytical solutions and interference between even and odd modes, the field distributions of TE modes for each grating patterns are evaluated. The numerical result reveals that the field distribution with maximum coupling efficiency occurs at P-GADC composed by square grating pattern. That is, it reveals at a minium gap condition of grating period $d_{min}=8.8{\mu}m$ different from conventional phase-matching condition of GADC.

• Journal of electromagnetic engineering and science
• /
• v.9 no.3
• /
• pp.164-173
• /
• 2009

In this paper, two new circuit structures for European and U.S. ultra-wide band(UWB) bandpass filters(BPFs) with sharp roll-off characteristics are introduced. We show first that the ultra-wide bandpass property is obtained from a $\lambda$/4 open T resonator with a capacitively coupled $\lambda$/4 short-circuited line, which provides two attenuation poles at lower and upper cutoff frequencies. Then, two identical capacitively coupled input/output lines, which can be $\lambda$/4-length open ends or $\lambda$/2-length short ends, with the T-resonator, are adopted to suppress lower and higher frequency components outside of the pass band. There is coupling between the input and output lines providing two additional transmission zeros in the lower and upper transition bands of the filter. Since the coupling between the T-resonator with the $\lambda$/4 short-circuited line and the input/output lines limits the bandwidth of the filter to the European UWB band, both the $\lambda$/4 short-circuited line and the input/output lines are inserted between the two stacked T-resonators for the U.S. UWB band. The filter structures are simulated with ADS and HFSS and realized with low-temperature co-fired ceramic(LTCC) green tape which has the dielectric constant of 7.8. Measurement results agree well with HFSS simulation results.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.361-366
• /
• 2016

This paper presents an arbitrary impedance transformer with unequal split, based on S- to admittance parameter conversion. When compared even/ odd- mode analysis, the parameter conversion design method constitutes a simple design method to include phase delay information and arbitrary port impedances and asymmetrical configurations. To validate this design method, we designed a 50 to $12.5{\Omega}$ impedance transformer with a 3:1 unequal power split, at an operating frequency of 1 GHz. To implement the proposed impedance transformer, the low impedance transmission lines of calculated result are fabricated by the transmission line connected shunt open stub. Good experimental performances were obtained, in full agreement with simulated results.

• Journal of electromagnetic engineering and science
• /
• v.16 no.1
• /
• pp.13-18
• /
• 2016

This paper presents a design of an impedance transformer (IT) with high frequency selectivity characteristics. The frequency selectivity can be controlled by even- and odd-mode impedance of a shunt coupled transmission line (TL). For experimental validation, a 50- to $20-{\Omega}$ IT was implemented at a center frequency ($f_0$) of 2.6 GHz for the long-term evolution signal. The measured results were in good agreement with the simulations, showing a return loss higher than 19 dB over a passband bandwidth of 0.63 GHz (2.28-2.91 GHz) and good sharp frequency selectivity characteristic near to the passband. The series coupled TL provides a transmission zero at 5.75 GHz, whereas the shunt coupled TL provides three transmission zeros located at 2 GHz, 3.1 GHz, and 7.14 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.598-604
• /
• 2011

A method of miniaturizing branch line coupler with connected coupled lines is presented. The quarter-wavelength transmission lines in the typical microstrip branch line coupler are replaced with the connected coupled lines with same characteristics of ones for compact size. The connected coupled line is analyzed by T-equivalent circuit and Z parameters based on the even-odd mode analysis. The proposed branch line couplers with connected coupled line are designed and fabricated on FR4 substrate at 2.4 GHz. The measured results show good agreement with theoretical prediction. And the experimental results show that the size of coupler is 37 precent smaller than conventional coupler. This minimized coupler is suitable for Butler Matrix as feeder for mobile communication beam forming antenna.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.175-179
• /
• 2005

A novel, simple and broadband $180^{\circ}$ bit X-band phase shifter was proposed and fabricated in a standard micromachining process. It is composed of two $90^{\circ}$ parallel-coupled lines; one of which is shorted and the other is grounded. Design equations for the proposed $180^{\circ}$ bit phase shifter are derived by the method of even and odd mode analysis. Based on design equations, $180^{\circ}$ bit phase shifter was designed and fabricated to operate from 7 to 13 GHz with ${\pm}5^{\circ}$ of phase deviation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.368-378
• /
• 2004

In this paper, we proposed the compensation structures for the enhanced directivity of CPW(Coplanar waveguide) directional couplers with finite-extent backed conductor. The proposed compensation structures are. realized by expanding the slot width between signal line and ground plane in center region of couplers. The CPW couplers with expanded slot have the same phase velocity for even and odd mode because of added inductance and changed capacitance appropriately, so the enhanced directivity is accomplished. The designed CPW directional couplers have good directivity and matching characteristic at center frequency in simulation and measurement.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.781-789
• /
• 2018

This paper proposes a new approach utilizing empirical mode decomposition (EMD) reconstruction to process vibration signals of a transformer under DC bias caused by high voltage direction transmission (HVDC), which is the potential cause of additional vibration and noise from transformer. Firstly, the Calculation Method is presented and a 3D model of transformer is simulated to analyze transformer deformation characteristic and the result indicate the main vibration is produced along axial direction of three core limbs. Vibration test system has been built and test points on the core and shell of transformer have been measured. Then, the signal reconstruction method for transformer vibration based on EMD is proposed. Through the EMD decomposition, the corrupted noise can be selectively reconstructed by the certain frequency IMFs and better vibration signals of transformer have been obtained. After EMD reconstruction, the vibrations are compared between transformer in normal work and with DC bias. When DC bias occurs, odd harmonics, vibration of core and shell, behave as a nonlinear increase and the even harmonics keep unchanged with DC current. Experiment results are provided to collaborate our theoretical analysis and to illustrate the effectiveness of the proposed EMD method.

• Structural Engineering and Mechanics
• /
• v.56 no.6
• /
• pp.939-957
• /
• 2015

In this paper, a new approach based on the continuum model is proposed to estimate the main cable tension force of suspension bridges from measured natural frequencies. This approach considered the vertical vibration of a main cable hinged at both towers and supported by an elastic girder and hangers along its entire length. The equation reflected the relationship between vibration frequency and horizontal tension force of a main cable was derived. To avoid to generate the additional cable tension force by sag-extensibility, the analytical solution of characteristic equation for anti-symmetrical vibration mode of the main cable was calculated. Then, the estimation of main cable tension force was carried out by anti-symmetric characteristic frequency vector. The errors of estimation due to characteristic frequency deviations were investigated through numerical analysis of the main cable of Taizhou Bridge. A field experiment was conducted to verify the proposed approach. Through measuring and analyzing the responses of a main cable of Taizhou Bridge under ambient excitation, the horizontal tension force of the main cable was identified from the first three odd frequencies. It is shown that the estimated results agree well with the designed values. The proposed approach can be used to conduct the long-term health monitoring of suspension bridges.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.12
• /
• pp.22-31
• /
• 2000

A new analysis method of Tap-011 for CATV and DBS systems was proposed and investigated by using 4-port and 3-port equivalent circuits. As an analysis method the even odd-mode theory for a symmetrical coupled-line directional coupler was introduced, and then it was applied to transformer type directional coupler. By comparing the results of simulation and measurement, the validity of the proposed analysis method was confirmed. Furthermore, the Tap-off has been broadened from 5 MHz to 2.500 MHz by adopting the proposed theory.