• 한국해양공학회지
• /
• 제23권3호
• /
• pp.53-58
• /
• 2009

A scale model test for ship Infra-Red signature measurements at sea is impossible, because it is sensitive to the environment. Since we can't control the meteorological environment of the real sea, it can't be carried out with the desired maritime environments. Therefore, in the sea, we made measurements of the weather, operating conditions of the ship, and ship IR signatures under given conditions, and then analyzed them. Conversely, we compared the results of the test with a prediction for a given scenario condition. This paper describes the test items, procedures, and measuring instruments of the experiments at sea and the results from basic researches for methods of estimation and analysis of the measured data.

• 수산해양기술연구
• /
• 제13권1호
• /
• pp.17-25
• /
• 1977

For four calender years (1971-1974), daily observations of weather conditions (air temperature, humidity, wind speed, wind direction, cloud amount, fog, precipitation etc.) at six stations in the north western Pacific Ocean are used to calculate mean monthly values and to check extra-conditions. At Petropavlosk and Miko'skoe, where indicate the characteristics of modified continental climate, the temperature and humidity are high in summer, and Iow in winter. At A Dak and She Mya, where indicate the characteristics of warm current type maritime climate, humidity is high in all season and annual range of air temperature is nearly negligible. At Simusir and Vasi!' eva, where indicate the characteristics of cold current type maritime climate, humidity is high in all season and annual range of air temperature is $15^{\circ}C.$ As dry cooling power is relatively high in winter, working condition on deck is bad. Most of fogs are advection fog in the area of cold current type climate in summer.

• 대한조선학회지
• /
• 제25권1호
• /
• pp.47-55
• /
• 1988

One of tuna longliners which have excellent operational record at the tropical Pacifical Ocean was selected as a parent hull form for the development of a new ship which could be operate at the high latitude northern Pacific Ocean. The parent hull was modified to adapt operational and enviromental condition of such a weather and sea states. This modification was carried out based on design experiences and model test results in towing tank. In this report modification techniques applied to the hull form design of a tuna longliner are summarized. The powering performance of the developed hull form is evaluated to show 19%, decrease of resistance campared with the parent hull form.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.513-515
• /
• 2003

COMS(Communication, Ocean and Meteorological Satellite), planned for launch in 2008, will be the first Korean ocean-meteorological geostationary satellite to provide capabilities for monitoring weather and ocean. Under the direction of Korean government, KARI(Korea Aerospace Research Institute) has the overall responsibility of COMS development project. The main development project was started in September 2003. In this paper, the overview of COMS development project and the conceptual design of the meteorological data service are introduced.

• 한국해양공학회지
• /
• 제34권5호
• /
• pp.294-303
• /
• 2020

This study discusses data collection, calculation of wind and wave-induced resistance, and speed-power analysis of an 8,600 TEU container ship. Data acquisition system of the ship operator was improved to obtain the data necessary for the analysis, which was accomplished using SPA (Ship Performance Analysis, Park et al., 2019) in conformation with ISO15016:2015. From a previous operation profile of the container, the standard operating conditions of mean draft were 12.5 m and 13.6 m, which were defined with the mean stowage configuration of each condition. Model tests, including the load-variation test, were conducted to validate new ship performance and for the speed-power analysis. The major part of the added resistance of container ship is due to the wind. To check the reliability of wind-resistance calculation results, the resistance coefficients, added resistance, and speed-power analysis results using the Fujiwara regression formula (ISO15016:2015) and Computational fluid dynamics (Ryu et al., 2016; Jeon et al., 2017) analysis were compared. Wind speed and direction measured using an anemometer were used for wind-resistance calculation and the wave resistance was calculated using the wave-height and direction-data from weather information. Also, measured water temperature was used to calculate the increase in resistance owing to the deviation in water density. As a result, the SPA analysis using measured data and weather information was proved to be valid and able to identify the ship's resistance propulsion performance. Even with little difference in the air-resistance coefficient value, both methods provide sufficient accuracy for speed-power analysis. The differences were unnoticeable when the speed-power analysis results using each method were compared. Also, speed-power analysis results of the 8,600 TEU container ship in two draft conditions show acceptable trends when compared with the model test results and are also able to show power increase owing to hull fouling and aging. Thus, results of speed-power analysis of the existing 8,600 TEU container ship using the SPA program appropriately exhibit the characteristics of speed-power performance in deal conditions.

• 한국해안·해양공학회논문집
• /
• 제32권4호
• /
• pp.273-283
• /
• 2020

2012년 서해에 내습한 태풍 볼라벤에 의해 발생한 폭풍해일과 파랑을 일본 기상청의 JMA-MSM 기상 예보 자료를 이용하여 수치모의하고, 계산된 해일고를 전국 해안의 항만에서 관측된 폭풍해일 자료와 비교하였다. 폭풍해일과 동시에 발생하는 파랑에 대해서는 해양조사원과 기상청에서 운영하는 해상 파고부이 자료와 비교하여 검증하였다. 기상자료에 따른 폭풍해일과 파랑의 특성을 파악하기 위해 미국 합동태풍경보센터인 JTWC에서 제공하는 best track을 이용하여 생성된 기압장과 바람장을 이용한 수치모의를 수행하고 비교하여 분석하였다. JMA-MSM 기상장은 지형과 선행 배경 기상장이 잘 반영되어 태풍 통과 전후의 전 기간에 걸쳐 파랑과 폭풍해일을 비교적 잘 재현한 반면, JTWC best track을 이용하여 생성된 기상장은 태풍 영향 구역이 협소하여 파랑과 해일고의 시간적 변화 등 전반적인 추세를 반영하지 못하는 등 한계가 있었다. 이 연구를 통하여 폭풍해일과 파랑을 추산하기 위해 신뢰도 높은 기상장이 필수적임을 알 수 있었다.

• 한국항해항만학회지
• /
• 제44권3호
• /
• pp.166-173
• /
• 2020

항로표지사고는 통항선박의 항행위험을 초래하고, 항로표지의 신뢰성을 저하시킬 수 있다. 해상에 가장 많이 설치·운영되고 있는 등부표는 바람, 조류, 파도 등 해양기상의 영향으로 인한 사고율이 가장 높다. 그러나 우리나라 등부표 설치해역별 해양기상조건이 다름에도 불구하고, 등부표의 동적안정성 계산에 있어 전 해역에 일류적인 극한조건만을 적용하고 있는 문제점이 있다. 따라서 본 연구의 목적은 등부표 중 해상에 가장 많이 설치되어 있는 LL-26(M) 등부표의 동적안정성을 분석하여, LL-26(M) 등부표의 안정적인 운영 방안을 제시하는 것이다. 이를 위해 등부표와 관련한 선행연구의 해역별 기상을 분석한 후, 해양기상에 의한 사고발생 횟수가 많은 해역별 대표 등부표에 적용하여 동적안정성(경사각)을 추정하였다. 연구결과 각 해역별 LL-26(M) 등부표의 경사각은 상이하였다. 즉, 바람에 의한 경사각은 10.329°~36.868°이고, 조류에 의한 경사각은 0.123°~18.834°이며, 파도에 의한 경사각은 4.777°~20.695°로 나타났다. 이러한 연구결과는 LL-26(M) 등부표의 안정적 운영을 위한 해역별 설치기준 마련에 유용한 기초자료로 활용될 수 있을 것이다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.277-283
• /
• 2003

This paper constructed the 3D real-time numerical model for which predicts the water quality and movement characteristics of the inner bay, which consider the characteristics of the wind-driven current and density current in estuaries which generated by the river discharge from the Hyeong-san river and oceanic water of the Eastern sea. The constructed numerical model reappeared successfully the seawater circulation current of Yeong-il Bay, which used the input conditions of the real-time tidal current, river discharge and weather conditions at March of 2001 year. Also to observe the wind-driven current and density current in estuaries effected to the seawater circulation pattern of the inner bay, we investigated the analyzation for the each impact factors and the relationship with the water quality of Yeong-il bay

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권3호
• /
• pp.640-653
• /
• 2015

In order to develop the challenging process of placing Aids to Navigation (AtoN), we propose performance measures which quantifies the effect of such placement. The best placement of AtoNs is that from which the navigator can best recognize the information provided by an AtoN. The visibility of AtoNs depends mostly on light sources, the weather condition and the position of the navigator. Visual recognition is enabled by achieving adequate contrast between the AtoN light source and background light. Therefore, the performance measures can be formulated through the amount of differences between these two lights. For simplification, this approach is based on the values of the human factor suggested by International Association of Marine Aids to Navigation and Lighthouse Authorities (IALA). Performance measures for AtoN placement can be evaluated through AtoN Simulator, which has been being developed by KIOST/KRISO in Korea and has been launched by Korea National Research Program. Simulations for evaluation are carried out at waterway in Busan port in Korea.

• 한국기후변화학회지
• /
• 제8권1호
• /
• pp.11-19
• /
• 2017

This study examined the relationship between the initiation timing typhoon season in the Northwestern Pacific and the tropical sea surface temperature (SST) using a numerical simulation. The initiation timing of the typhoon season is closely associated with SSTs over the Indian Ocean (IO) and the eastern Pacific (EP) in the preceding winter and early-spring. The experiment based on the Weather and Research Forecast (WRF) model showed that the start date of the typhoon season is delayed for about one month when the SSTs over the IO and the EP increase in the preceding winter. The forced tropical SST pattern induces anticyclonic anomalies in the Northwestern Pacific, which is an unfavorable condition for typhoon development, and hence it could delay the initiation of the typhoon season.