• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• v.3 no.1
• /
• pp.23-28
• /
• 2000

A numerical investigation was made to examine characteristics of rectangular pontoon type floating breakwaters in oblique waves. Sway and heave wave exciting forces, roll moment acting on the floating breakwater and three motion reponses decrease as the incident wave angle increases for the most of the wave ranges. There exists a minimum wave transmission coefficient which is a function of wave frequency. In short wave range wave transmission coefficient increases as the incident wave angle increases. In long wave range, however, wave transmission coefficient decreases as the wave incident angle increases.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.243-249
• /
• 2003

The head-on collision of two solitary waves are examined using a boundary element method. Attachment, detachment times and alplitudes and maximum run-up times and amplitudes are computed. Consolidation times show local minimum value if two waves are of equal amplitudes are colliding. Attachment times show local maximum value if the amplitudes of two waves are the same. The detachment time show local maximum if two wves are the same. The detachment amplitude show local minimum values if the amplitude e(=a/h) is greater than 0.3.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.264-269
• /
• 2002

The wave profiles of directional breaking waves are investigated experimentally in a directional wave basin. The directional breaking waves are generated by component wave focusing both in direction and frequency based on constant wave steepness and constant wave amplitude spectrum models. the profile parameters of wave crest steepness and asymmetry are adapted to analyze the evolution of breaking ware characteristics in a view of focusing efficiency. The generated breaking waves are classified into the incipient, single and multi breaking waves.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.6
• /
• pp.117-123
• /
• 2009

This paper presents a numerical simulation of guided ultrasonic waves propagating in aluminum-epoxy-aluminum adhesive plates. In particular, this study investigated the effect of the epoxy thickness on the dispersive patterns, such as the phase velocity and group velocity of guided ultrasonic waves. In addition to investigating the dispersive curves, a numerical simulation using the pulse-echo method was carried out. This simulation showed that the degree of sensitivity of the epoxy thickness is dependent on the curvature of the phase and group dispersion curves, the maximum amplitude of the received time signals, and the peak frequency of the real components of the Fourier transform. Then, the linear relations between the epoxy thickness and the received and transformed signals were constructed to estimate the epoxy thickness.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.3
• /
• pp.178-186
• /
• 1992

An experimental study of deep-water breaking waves are performed by superposition of different wave frequencies, faster waves overtaking slow waves at a certain location. Large spilling and plunging breaking waves are generated near the expected breaking location. Wave steepness in spilling and plunging breakers significantly increases as the breaking point is approached and then decreases after breaking. Larger growth rate of the wave steepness in vigorous plunging breaking is observed. The fundamental wave frequencies in a wave group are dominant through the wave evolution, even in an intense plunging breaking event.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.140-145
• /
• 2010

This study presents a detection method for mechanically fabricated defects on underwater steel pipes, using ultrasonic guided waves. Three different diameters (60, 90, and 114 mm) of 1000-mm long steel pipes were considered, along with several experimental design factors such as incident angles, incident distances, and the degrees of defects, to investigate how these factors affected the experimental results - the detectability of the mechanical defects. From the experimental results, we determined that the amplitude and arrival time of the first received wave signals gave a promising clue for distinguishing the existence of the defects and their severities. Between the amplitude and arrival time, the arrival time gave a more promising indication since it was affected by the experimental factors in a constant manner. Therefore, it was shown that the use of ultrasonic guided waves for underwater pipe inspection is feasible.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.367-372
• /
• 2006

If the sea is narrowband, the Rayleigh distribution introduced by Longuet-Higgins can be used for the individual wave height distribution. However the Rayleigh distribution over-predicts the probability of high waves. Longuet-Higgins introduced alternative form of the Rayleigh distribution with an empirical constant. The wave height distribution can be fitted well by one parameter Rayleigh distribution with a proper choice of the empirical constant. The empirical constant is the ratio of the significant wave height based the time domain analysis and the spectral analysis. Here we examine wave data which contain extreme waves. Once again we confirmed that extreme wave height distribution can be modelled well by a modified Rayleigh distribution.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.4
• /
• pp.6-11
• /
• 2009

In this study, the internal waves in two-density layered fluids were analyzed using the Numerical Wave Tank (NWT) technique in the frequency domain. The NWT is based on a two-domain Boundary Element Method with the potential fluids using the whole-domain matrix scheme. From the mathematical solution of the two-domain boundary integral equation, two different wave modes could be classified: a surface wave mode and an internal wave mode, and each mode were shown to have a wave number determined by a respective dispersion relation. The magnitudes of the internal waves against surface waves were investigated for various fluid densities and water depths. The calculated results are compared with available theoretical data.

• Ocean Systems Engineering
• /
• v.12 no.4
• /
• pp.439-459
• /
• 2022

This paper describes experimental studies of impact pressure generated by breaking regular waves in shallow water on a vertical cylinder. Experimental work was carried out in a shallow water flume using a 1:30 - scale model of a vertical rigid circular hollow cylinder with a diameter 0.2 m. This represents a monopile for shallow water offshore wind turbines, subjected to depth induced breaking regular waves of frequencies of 0.8 Hz. The experimental setup included a 1 in 10 sloping bed followed by horizontal bed with a constant 0.8 m water depth. To determine the breaking characteristics, plunging breaking waves were generated. Free surface elevations were recorded at different locations between the wave paddle to the cylinder. Wave impact pressures on the cylinder at a number of elevations along its height were measured under breaking regular waves. The depth-induced wave breaking characteristics, impact pressures, and wave run-up during impact for various cylinder locations are presented and discussed.

• Structural Engineering and Mechanics
• /
• v.34 no.3
• /
• pp.395-398
• /
• 2010