• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.385-391
• /
• 2012

This study was conducted to investigate the effects of the runner cutting time on the growth and yield of strawberry (Fragaria ${\times}$ ananassa cv. Maehyang and Seolhyang) during nursery period of two consecutive years (2009 and 2010). Strawberry runners which connected from mother plants to daughter plants were cut 30, 20, 10 and 5 days before transplanting day (11 Sep. 2009 and 10 Sep. 2010). When runner cutting time delayed, more nutrition was supplied to the daughter plant until late nursery period. It showed that there was a tendency to increase the fresh weight, crown diameter and leaf chlorophyll content. On the other hand, when the runner was cut earlier, the growth of underground part such as root weight was improved. Irrigation demand increased to 29.7% in case of runner cutting from mother plant compared with runner non-cutting treatment. In addition, infection ratio of anthracnose through runner part was 37.6% higher in case of runner cutting than that of runner non-cutting treatment. After transplanting, budding and flowering period were delayed up to 2 or 3 days because of late runner cutting. But there was no significant difference in marketable fruit yield among runner cutting times. It is recommended to conduct runner cutting 5 or 10 days before transplanting for reducing the occurrence of anthracnose.

• The Journal of Engineering Geology
• /
• v.13 no.4
• /
• pp.429-444
• /
• 2003

Domestic marbles are mostly distributed in Gyeonggi and Yeongnam Massifs, southwest and northeast Ogcheon Belts, which belong to Precambrian, age-unknown, Cambrian-Ordovician ages, respectively. The former marbles occur as interbedded rocks in metasediments and xenoliths in granitic gneisses. Age-unknown ones occur as interbedded in the formations of Hyangsanri, Gyeomyeongsan, Hwajeonri and Munjuri, and some in metasedimentary rocks. The latter ones occur as interbedded in Pungchon Limestone, and in Jeongseon Limestone, Hwacheonri Formation and Great Limestone Group, respectively. Among physical properties, porosity shows irregular patterns to density and compressive strength, respectively. Absorption ratio has a linear pattern of positive trend to porosity, and compressive strength mostly shows a positive trend to tensile strength. Compressive strengths of the marbles are as follows : Precambrian $1,106{\;}kg/\textrm{cm}^2$, age-unknown $935{\;}kg/\textrm{cm}^2$. Cambrian $1,162{\;}kg/\textrm{cm}^2$ and Ordovician $1,560{\;}kg/\textrm{cm}^2$, respectively. Tensile strengths have decreasing trends as the above order of geologic age. In diagrams of major elements, $Al_2O_3,{\;}Fe_2O_{3(t)}{\;}and{\;}Na_2O+K_2O$ generally show positive trends with increasing $v_2$. MgO/CaO of Precambrian and age-unknown marbles have much higher values than Cambrian and Ordovician marbles as follows, Precambrian 0.31, age-unknown 0.30, Cambrian 0.03 and Ordovician 0.08. And MgO shows a negative trend with increasing CaO, which nay be caused by dolomitization. By MgO contents they can be classified into calcitic dolomite, dolomitic limestone, limestone and dolomitic limestone, respectively.

• Tunnel and Underground Space
• /
• v.30 no.2
• /
• pp.164-179
• /
• 2020

Applying the limit state design method to geotechnical structures, accuracy and reliability of its design are mainly affected by parameters for geotechnical site characteristics, such as unit weight, Poisson's ratio, deformation modulus, cohesion and frictional angle. When the structures are located in weathered ground, especially, cohesion and frictional angle of ground are closely related with decision of parameters for structures' load and ground's resistance. Therefore, the accurate determination of these parameters, which are commonly obtained from field measurement, such as borehole shear test, are essential for optimum design of geotechnical structures. The 38 case studies, in this study, have been analyzed for understanding the importance of these parameters in designing the ground structures. From these results, importance of field measurement was also ascertained. With these evaluations, an apparatus for determining the strength characteristics, which are fundamental in limit state design (LSD) method, have been newly developed. This apparatus has an improved function as following the ASTM suggestion. Through the field application of this apparatus, the strong point of minimizing the possibility of error occurrence during the measurement has been verified and authors summarized that the essential parameters for LSD can be qualitatively obtained by this apparatus for determination of strength characteristics of weathered ground.

• Journal of Life Science
• /
• v.7 no.3
• /
• pp.192-197
• /
• 1997

Italian ryegrass, red clover, sorghum, and alfalfa were used for leaf protein preparation. Fresh leaves were pulped in the presence or absence of a reducing agent(sodium ascorbate or NaHSO$_{4}$) and green juice was heated and washed with acetone. The biological evaluation of leaf proteins was carried out by the growth method with male rats weighing about 45g. Italian ryegrass, red clover, and sorghum were brown when leaves were pulped in the absence of a reducing agent. On the other hand, alfalfa had neither o-diphenolics nor polyphenolase, and hence the alfalfa leaf protein did not brown during pulping ever in the absence of a reducing agent. The brown leaf protein from Italian ryegrass hd lower digestibility than the leaf protein protected from browning, although there were no difference in growth-promoting effect and protein efficiency ratio(PER)between the two leaf protein. The feeding of brown leaf protein from red clover resulted in the lowering of weight gain, digestibility, and PER, and all the measurement including diet intake were lowered by feeding the brown leaf protein from sorghum. In the case of alfalfa leaf protein, there were no difference in nutritional quality between the two leaf protein made with and without an attempt to prevent browning. The results mentioned above indicate that the occurrence of phenolics and polyphemolase in a crop in responsible for the browning of leaf protein and that the browning of leaf protein caused its nutritional impairment.

• Journal of agriculture & life science
• /
• v.45 no.4
• /
• pp.59-63
• /
• 2011

The symptoms such as weaken shape, partial and full death in nurse- and old- trees have been mostly caused by the occurrence of cavity. In general, the adaption of poly-urethane has been practised routinely in the way of treatment in cavity. However, the use of poly-urethane was not an effective, but it was related to pollution materials. Here, the experiment was conducted to identify the effects of the treatments of loess or micro-organisms for the alternatives of poly-urethane. The cavities which occurred in Zelkova serrata, Prunus yedoensis and Quercus myrsinaefolia were treated by poly-urethane, loess, mixtured loess and micro-organism (Rhadobacter), and mixtured loess and micro-organism (Rhodobacter + bacillus). As the results of this experiment, it was shown that the treatment of mixtured loess and micro-organism (Rhodobacter + bacillus) induced to develop greater callus formation in the cavity up to 97% in Zelkova serrata, up to 87% in Prunus yedoensis, and by 73% in Quercus myrsinaefolia than the treatment of poly-urethane. But the only loess and mixtured loess and micro-organism (Rhadobacter) was a similar or lower callus formation ratio than poly-urethane.

• Korean Journal of Remote Sensing
• /
• v.16 no.1
• /
• pp.13-24
• /
• 2000

SAR imagery usually reveals the influence of antenna look-direction on the delineation of geological structures. In this study, the look-direction bias in SAR image is quantitatively analyzed specifically for geological lineament study. Geologic lineaments are estimated using both Landsat TM and JERS-1 SAR images over the study area to quantitatively compare and analyze the look-direction bias in the SAR image. The standard geologic lineaments in the study area are established from lineaments estimated from TM images, field mapping, and fault lines in a published geologic map. The results show that lineaments normal to radar look-direction are extremely well enhanced while those parallel to look-direction are less visible as expected. However, certain lineaments even parallel to radar look-direction can still be detectable in a favorable topographic condition. Compared with TM image, the total number of detected lineaments in each direction in the SAR image increases or decreases ranging from 33% to 159% in length and from 28% to 187% in occurrence. The ratio of lineaments in SAR image to those in TM image with respect to direction can be fitted by a cosine function. The fitted function indicates that geological lineament is more easily detected in SAR image than in TM image within about $\pm$50$^{\circ}$ normal to radar look-direction. And lineaments with limited extension appear to be more sensitive to the look direction bias effect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.452-458
• /
• 2019

The purpose of this study is to analyze how managers' reporting choices affect asymmetric cost behaviors in manufacturing firms in Korea and Japan. In order to analyze the contents, SG&A, COGS, and operating expenses (OE), which were the targets of the previous studies, were analyzed using the operating costs paid in cash (OC) and the operating expenses before depreciation (OEBD) proposed by Shust and Weiss (2014). The differentiation of cost behavior was analyzed. The analysis revealed, first, that both Korea and Japan showed the difference between cost behavior of OE and OC. Specifically, the cost stickiness of OC was higher than that of OE. In particular, it showed that Korea firms have a higher intensity of tangible fixed assets that are weakening the cost stickiness compared to Japanese firms. Second, the occurrence of depreciation costs weakens the cost stickiness in both countries. Lastly, the higher the debt ratio, the more aggressively the cost reduction of Japanese companies. We hope that this study will help to improve the relationship between the two countries at the academic level when the Korea-Japan relationship cools down.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1144-1149
• /
• 2011

The occurrence of Korean pine (Pinus koraiensis) advance growth has been noticed in the deciduous oak forest being adjacent to the mature Korean pine plantation. the korean pine seedlings in the forest were regenerated naturally from harvested and transported Korean pine seeds and cones by rodents, mainly red squirrels. Mongolian oak (Quercus bariabilis), which formed dominant overstory, had close-to-normal distributions of height, diameter and age classes. Korean pine, which dominated the understory, had the reverse J-shaped height, diameter and age distributions that are expected of a shade tolerant species. Growing in the summer shade of the oak, Korean pine seedling had slow, but steady height growth during the past four decades. Total biomass of Korean pine seedling ranged from $2,835-8,541kg\;ha^{-1}$ and biomass allocation of Korean pine seedling was follows : stem (with bark) > foliage > branches > roots. Korean pine seedlings allocated more biomass to foliage and branches compare to planted Korean pine. The smaller root/shoot ratio of Korean pine seedling in the site is to believed to be result of competition for light. Contents of N and K for Korean pine seedling were greatest in foliage follow by branches, stem ad roots, while content of P was greater in the order of foliage > roots > stem > branches.

• Korean Journal of Ichthyology
• /
• v.33 no.3
• /
• pp.177-183
• /
• 2021

Distribution aspects and extinction threat evaluation of the endangered species, Rhynchocypris semotilus were investigated in Goseong-gun, Gangwon-do, Korea, June 2020. Among the 12 sampling sites investigated during the study period, samples of R. semotilus were collected 268 individuals at 6 sites. The streams inhabited of R. semotilus were Songhyeoncheon (3 stations), Gojindong (2 stations) and Osodong (1 station). The main habitats of R. semotilus were uppermost and upper stream (Aa type) with 3~15 m water flow width, 0.3~1.3 m depth and high ratio boulder and cobble bottoms. The estimated age of the R. semotilus (June) based on their total length distribution indicated that 0-, 1-, 2-, 3- and more than 4-year-old were 6~27 mm, 38~59 mm, 60~75 mm, 78~93 mm and 96~125 mm, respectively, and their has matured reproductive organs over two years old. R. semotilus investigation results of the threat of extinction showed no tendency to decrease in population size, but estimated to be less than 1,000 mature individuals, with a small range of extend of occurrence (39.668 km²), area of occupancy (16 km²), and number of disconnected locations (3 locations). Therefore, R. semotilus is now considered vulnerable (VU D2) based on the IUCN Red List categories and criteria.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.3
• /
• pp.437-446
• /
• 2021

Objective : To investigate the radiographic characteristics of the uppermost instrumented vertebrae (UIV) and UIV+1 compression fractures that are predictive of revision surgery following long-segment spinal fixation. Methods : A total 27 patients who presented newly developed compression fracture at UIV, UIV+1 after long segment spinal fixation (minimum 5 vertebral bodies, lowest instrumented vertebra of L5 or distal) were reviewed retrospectively. Patients were divided into two groups according to following management : revisional surgery (group A, n=13) and conservative care (group B, n=14). Pre- and postoperative images, and images taken shortly before and after the occurrence of fracture were evaluated for radiologic characteristics Results : Despite similar degrees of surgical correction of deformity, the fate of the two groups with proximal junctional compression fractures differed. Immediately after the fracture, the decrement of adjacent disc height in group A (32.3±7.6 mm to 23.7±8.4 mm, Δ=8.5±6.9 mm) was greater than group B (31.0±13.9 mm to 30.1±15.5 mm, Δ=0.9±2.9 mm, p=0.003). Pre-operative magnetic resonance imaging indicated that group A patients have a higher grade of disc degeneration adjacent to fractured vertebrae compared to group B (modified Pfirrmann grade, group A : 6.10±0.99, group B : 4.08±0.90, p=0.004). Binary logistic regression analysis indicated that decrement of disc height was the only associated risk factor for future revision surgery (odds ratio, 1.891; 95% confidence interval, 1.121-3.190; p=0.017). Conclusion : Proximal junctional vertebral compression fractures with greater early-stage decrement of adjacent disc height were associated with increased risk of future neurological deterioration and necessity of revision. The condition of adjacent disc degeneration should be considered regarding severity and revision rate of proximal junctional kyphosis/proximal junction failures.