• 지적과 국토정보
• /
• 제44권2호
• /
• pp.113-124
• /
• 2014

최근 집중호우에 의한 산사태 발생이 빈번해짐에 따라 산사태 취약지역을 분석하고 산사태 발생을 예측하기 위한 다양한 연구들이 진행되고 있다. 본 연구에서는 산사태 발생지역의 토양특성을 분석하였으며, 배수 특성별 우도비를 평가한 결과 배수가 좋은 토양에서 산사태 발생 가능성이 높게 나타났다. 또한 DEM 자료에서 추출한 경사도의 우도비를 평가한 결과 $20{\sim}40^{\circ}$ 경사구간에서 산사태 발생 가능성이 높게 나타났다. 그리고 공간분석에 의한 사면방향도의 우도비를 평가한 결과 북향에서 산사태 발생 가능성이 높게 나타났다. 아울러 토양배수, 경사도 그리고 사면방향도의 우도비를 중첩하여 산사태 취약도를 평가할 수 있었으며, 산사태 발생지역에 대하여 분석과 검증 프로세스를 수행함으로써 미래 산사태 발생 예측비율을 평가할 수 있었다.

• 한국주거학회논문집
• /
• 제3권2호
• /
• pp.75-88
• /
• 1992

The purpose of this study is to analyze the relations between the conditions of the flaws and the types of damage according to the characteristics of housing, and then to provide with some basic data for the construction of houses of good quality. The effective analytic data for this research are 558 of all 700 questionnaires gathered through distribution collection and personal interviews conducted from June 22, 1992 Through to July 6, towards the first occupants in apartment houses, tenement houses, multidetached houses, multifamily houses and detached houses that last 10 years after construction, located in Seoul and Kyungki-Do. Our major findings are as under:1) Our data reveal that the ratio of flaw occurrence by general type breaks down into noise 53.7%, crack 39.3%, dew condensation 36.9%, windows and doors 36.6%, structure and frame 35.3%, built-in materials 33.3%, the inferiority of equipments/facilities 29.0%, ill drainage 22.0%, and the leakage of water 19.3% average number of flaw occurrence, multi detached house is the highest as 13.7, apartment house 10.5, tenement house 10.5, detached house 10.51 and multifamily house 8.7.3) As regards the degree of flaw occurrence, the flaw of noise is as serious in the degree of occurence as it is high in the ratio of occurrence. Particularly, the following contrastive phenomena are found: multidetached house is normal (2.0) in the degree of occurrence but it is high in the ratio of occurrence: while multifamily house is 2.9 in the degree of occurrence but it is low in the ratio of occurrence.4) In view of the relations between the types of flaws and those of damage, the flaw type which significantly influences on the injury of spirit and health is built-in materials; the flaw types that have considerable effect on the damage of house and home life are the inferiority of equipments/facilities, due condensation, and inferior windows and doors; and the flaw types that have a bad influence over the reliance on the constructors are the inferiority of equipments/facilities, due condensation and built-in materials.

• 한국수소및신에너지학회논문집
• /
• 제14권2호
• /
• pp.131-137
• /
• 2003

Backfire occurrence must be controlled for the practical use of hydrogen fueled engine. It was found from preceeding studies that crevice volume around piston rings could effect a backfire occurrence. In this study, a possible countermeasure to backfire occurrence was evaluated by using multi point ignition method around piston ring. The results showed that backfire limited equivalence ratio was increased by a little due to a enhancing effect of mixture combustion around piston crevice volume.

• 대한기계학회논문집
• /
• 제18권12호
• /
• pp.3326-3334
• /
• 1994

To theoretically predict knock occurrence in S. I. engine as a function of engine design and operating parameters, transient local temperature and pressure, mixture density of flame front in combustion period are calculated. We next determined normal combustion period and auto ignition period of end gas using the prediction method on occurrence of spark knock which we suggested. We predict knock occurrence in S. I. engine by comparing consecutively normal combustion period with the auto ignition period of end gas in combustion period. Engine design and operating parameters such as compression ratio, engine speed, spark timing, inlet temperature and pressure are taken into account in this calculations. The predicted result are well matched with the experimental results in turbocharged engine. Therefore, this method will provide the systematic guideline for designing engines in view of knocking limits.

• 한국연초학회지
• /
• 제17권2호
• /
• pp.120-125
• /
• 1995

Varietal difference in the occurrence of grey leaves in upland diverted from paddy field were investigated with several flue-cured tobacco varieties in Korea. Grey leaves caused by Fe, Mn and Cl toxicity were occurred in all varieties used in this experiment. The variety, NC82 and KF113, however, were more sensitive than other varieties to the toxicity. It's revealed that grey leaves had little effects on the contents of total sugar, nicotine and total nitrogen. NC82 and KF113 were increased in the ratio of occurrences in the paddy soils which had a tendency to concrete with the passage of days after transplanting. NC82 showed high occurrences of grey leaves in each of variety used and it was estimated that this variety had a traits of easy occurrences of grey leaves, and it might be presumed that there would be a close connection between the ratio of occurrence and amounts of absorbed causal materials accumulated in plants and tobacco varieties on the occurrence of grey leaf tobacco.

• 한국콘텐츠학회논문지
• /
• 제17권11호
• /
• pp.515-524
• /
• 2017

본 연구는 전염병이 관광산업의 경영성과에 미치는 영향을 분석하기 위해 메르스 발생 전후 호텔업, 여행업, 항공업의 경영성과에 차이가 있는가를 분석하였다. 분석결과 호텔업의 경우 수익성 지표인 매출액세전 순이익률과 매출액영업이익률이 메르스 발생 전후 통계적으로 유의적인 차이가 있는 것으로 나타났는데 두 변수 모두 메르스 발생 이후 낮아진 것으로 나타났다. 여행업의 경우 안정성지표인 부채비율과 차입금의존도가 메르스 발생 전후 통계적으로 유의적인 차이가 있는 것으로 나타났으며 두 변수 모두 메르스 발생이후 높아진 것으로 나타났다. 또한 활동성지표 중 재고자산회전율이 메르스 발생이후 낮아진 것으로 나타났다. 항공업의 경우 수익성지표 중 매출액영업이익률이 메르스 발생 이후 약간 높아졌으며 활동성 지표 중 총자산회전율이 메르스 발생이후 낮아진 것으로 나타나 통계적으로 유의적인 차이가 있었다. 따라서 관광산업의 경영자는 업종의 특성에 맞게 전염병에 대한 부정적 인식을 완화할 수 있는 마케팅 전략의 수립 등 적극적인 대처 방안을 모색해야 한다.

• 터널과지하공간
• /
• 제18권6호
• /
• pp.436-446
• /
• 2008

지반침하 지역의 지표침하량은 지하 채굴적의 높이보다 작은 것으로 분석되고 있다. 이러한 원인은 암반의 부피팽창률이며 아직까지 이에 대한 연구는 미흡한 실정이다. 따라서 본 연구에서는 부피팽창률 산정을 위해 3차원 입체 모델을 이용하여 지표침하량과 침하영향범위를 고려한 이론식을 유도하였다. 또한 수치해석 시 부피 팽창률의 적용성 검토를 위하여 개별요소 프로그램인 UDEC(Universal Distinct Element Code)을 이용하여 측압계수의 변화에 따른 지표침하의 변화 양상과 점착력의 변화에 따른 부피팽창률의 변화 양상을 분석하였다.

• Geomechanics and Engineering
• /
• 제1권1호
• /
• pp.1-15
• /
• 2009

Many aspects of the behavior of sands are affected by the content of non-plastic fine particles and these various aspects should be included in a constitutive model for the soil behavior. The fines content affects maximum and minimum void ratios, compressibility, shear strength, and static liquefaction under undrained conditions. Twenty-eight undrained triaxial compression tests were performed on mixtures of sand and fine particles with fines contents of 0, 10, 20, 30, 50, 75, and 100% to study the effects of fines on void ratio, compressibility, and the occurrence of static liquefaction. The experiments were performed at low consolidation pressures at which liquefaction may occur in near-surface, natural deposits. The presence of fines creates a particle structure in the soil that is highly compressible, enhancing the potential for liquefaction, and the fines also alter the basic stress-strain and volume change behavior, which should be modeled to predict the occurrence of static liquefaction in the field. The void ratio at which liquefaction occurs for each sand/fines mixture was determined, and the variation of compressibility with void ratio was determined for each mixture. This allowed a relation to be determined between fines content, void ratio, compressibility, and the occurrence of static liquefaction. Such relations may vary from sand to sand, but the present results are believed to indicate the trend in such relations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1425-1427
• /
• 2009

In this paper, we investigated influence of gas pressure and gas mixing ratio on the abnormal discharge characteristics of fluorescent lamp. Abnormal discharge characteristics have been examined by changing inner gas pressure and mixing ratio. As the inner gas pressure and mixing ratio increase, the occurrence of abnormal discharge was delayed. It was found out that the occurrence of abnormal discharge is sufficiently delayed at the optimized inner gas pressure and mixing ratio.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2505-2510
• /
• 2009

Semiconductor processes need measurement to confirm where there are problems in quality after progresses manufacturing process. This paper suggests equipment and automatic measure sampling method that control monitoring ratio according to change point occurrence availability of process that is not measure method by the existent simple ratio rate. This paper defines measure section as ailment section, metastable section and stability section by change point standard and create statistical model of each section and developed suitable measure rate model by section. As a result, we have accomplished maximum throughput and minimum sampling number that needs to maintain constant level of quality. Proposed method minimizes load of measure process by brings production quality sophistication and decrease of process badness and lowers measure rate in stable section making perception about problem occurrence quick heightening measure rate at change point occurrence.