• Safety and Health at Work
• /
• 제2권4호
• /
• pp.321-327
• /
• 2011

Objectives: To find out from an analysis of empirical data the levels of influence, which a labor union (LU) and Occupational Safety and Health Committee (OSHC) have in reducing the occupational injury and illness rate (OIIR) through their accident prevention activities in manufacturing industries with five or more employees. Methods: The empirical data used in this study are the Occupational Safety and Health Tendency survey data, Occupational Accident Compensation data and labor productivity and sales data for the years 2003 to 2007. By matching these three sources of data, a final data set (n = 280) was developed and analyzed using SPSS version 18 (SPSS Inc., Chicago, IL, USA). Results: It was found that a workplace with a LU has a lower OIIR than one without a LU. In manufacturing industries with five or more employees in 2007, the OIIR of the workplaces without a LU was 0.87%, while that of workplaces with a LU was much lower at 0.45%. In addition, workplaces with an established OSHC had a lower OIIR than those without an OSHC. Conclusion: It was found that the OIIR of workplaces with a LU is lower than those without a LU. Moreover, those with the OSHC usually had a lower OIIR than those without. The workplace OIIR may have an impact on management performance because the rate is negatively correlated with labor productivity and sales. In the long run, the OIIR of workplaces will be reduced when workers and employers join forces and recognize that the safety and health activities of the workplace are necessary, not only for securing the health rights of the workers, but also for raising labor productivity.

• 대한안전경영과학회지
• /
• 제6권1호
• /
• pp.11-23
• /
• 2004

The modem industrial society is developing while growing more diverse and gigantic. Accordingly, occupational injuries or accidents can be caused in various situations, not just in the limited range of workplaces but also in the surroundings, and interest has increased in the prevention of occupational accidents with respect to occupational health and safety, and environment. Thus, this thesis will consider 4MlE (Man, Machine, Method, Material, Environment) as the fundamental causes of accidents and introduce a model of system in which the output of the process control system is replaced by accidents with its input by 4M1E. Furthermore, it will demonstrate how occupational hazardousness can be measured, whereby it can also be rated, by examining the relationship between 4M1E and types of accident in terms of the categories of severity, frequency, and detectability, based on the application of the model to the framework of FMEA.

• 한국직업건강간호학회지
• /
• 제17권2호
• /
• pp.210-215
• /
• 2008

Purpose: This study aimed to find the factors affecting medical sequelae management service satisfaction among injured workers. Method: This study population were 200 randomised samples of 619 medical sequelae management beneficiaries from April to June 2007 among occupational accident treatment ending workers in 2006. Data were collected through the telephone survey from November 28 to December 7 in 2007. Data were analyzed by ${\chi}^2$ test and multiple logistic regression using SAS 9.1 version. Results: According to the finding of this study, positive perceptions for the purpose and the effect of medical sequelae management were the factors influencing the satisfaction of medical sequelae management service. Conclusions: We recommend key issues to take into account for enhancing medical sequelae management service satisfaction in workers' compensation as follows; explaining the purpose and effect of medical sequelae management to client, evaluating medical sequelae management effect, and the policy participation of medical profession.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2022년도 춘계학술대회
• /
• pp.415-416
• /
• 2022

Marine pilot occupational accidents during transfer to/from the ship are at the top of the agenda after several safety campaigns by IMPA and individual attemptsThere is multiple transfer method for the marine pilot, but a most common way is to use the pilot cutter. This paper aims to predict marine pilot occupational accidents before it occurs by using historical data. Since the problem depends on several variables, this paper develops a model by using the random forest method to predict marine pilot accidents before happening with the random forest method by using RStudio software

• 한국산업보건학회지
• /
• 제30권1호
• /
• pp.39-49
• /
• 2020

Objectives: We investigated the status of accidents and deaths caused by chemical leakage and skin contact in Korea. The purpose of this study was to produce and provide technical reference data for the efficient management of accidents and the rational management of accidental chemicals. Methods: Accidents and deaths caused by chemical leakage and skin contact in industry were investigated. Based on 68 accident reports related to chemical leakage and skin contact, the causes of accidental deaths were analyzed. In addition, we investigated the chemical substances and articles that caused these accidents and deaths. Based on the results of the investigation, the causes of accidents caused by chemical leakage and skin contact were identified and practical management measures for the chemicals were suggested. Results and Conclusions: In 2018, 372 people suffered from chemical leaks and skin contact, up by 123 (about 49.4%) from the previous year. The number of accident deaths was 14, an increase of five (about 55.6%) from the previous year. In the last three years (2016-2018), 91 chemical substances and article groups were involved in accidents caused by chemical leakage and skin contact. There were 16 chemical substance and article groups involved in accidental deaths. There were ten cases of accidents involving two or more casualties due to chemical leakage and skin contact, and 23 deaths occurred. Most of these accidental deaths were caused by subcontractor workers outsourcing risks. Therefore, there is an apparent need to strengthen the responsibility for safety and health among subcontractors.

• 한국가스학회지
• /
• 제16권5호
• /
• pp.21-27
• /
• 2012

대학 실험실이나 연구시설에서 실험실 사고에 의해 인적 및 물적 손실이 꾸준히 발생되고 있어서 실험실 사고예방의 필요성이 제기되고 있다. 실험실 사고예방을 위해 무엇보다 중요한 것은 사고의 체계적인 분석이다. 국내에서 산업재해에 관한 분석 연구는 수행되어 왔으나, 실험실 사고 분석에 관한 연구는 수행되지 않았다. 본 연구에서는 실험실 사고예방 대책 수립을 위해 설문지를 개발하였고, 설문지는 대학과 연구기관에 전자우편이나 방문조사로 사고사례를 수집하였다. 사고사례 데이터는 계절별, 사고 분류형태, 발생형태, 기인물 및 상해종류 별로 분석 고찰하였다. 이 연구결과는 실험실 종사자의 안전 확보와 사고예방을 위한 기초자료로 활용하고자 하였다.

• 한국산업보건학회지
• /
• 제30권3호
• /
• pp.299-305
• /
• 2020

Objectives: The most important occupational health activity is work environment measurement(WEM) along with the health examination. The preventive function of the WEM system could be achieved on the assumption that all subjected workplaces are performing correctly the WEM. To achieve properly the original purpose of WEM, we suggested a policy for subjected workplaces that they should register whether subjected or not. Methods: We made registration draft through reviewing laws, reports and thesis for WEM. And we conducted Focus Group Interview for industrial health experts using structured questionnaire about the registration. Results: There were 412 occupational deaths from 2013 to 2017. And it was found that only 130(31.6%) workplaces which involved in these occupational deaths had conducted the WEM. In order to operate the WEM system with effect, the subjected workplaces should register the subject status. Such registration must be completed at the stage of industrial accident insurance enrollment. Conclusions: Conducting WEM is the first step to prevent intoxication accident in workpalces. To operate properly WEM we should correctly understand subjected workplaces. So it is needed for all subjected workplaces to register whether they are subjected or not.

• Safety and Health at Work
• /
• 제7권2호
• /
• pp.138-142
• /
• 2016

Background: Household waste collectors (HWCs) are exposed to hazardous conditions. This study investigates the patterns of workplace injuries and work-related illnesses of HWCs. Methods: This study uses cases of workplace injuries and work-related illnesses of HWCs that occurred between 2010 and 2011. We analyzed 325 cases of injuries and 36 cases of illnesses according to the workers' age, length of employment, size of workplace, injured part of body, day and month of injury, type of accident, agency of accident, and collection process. Results: There were significant differences in the effect of workers' length of employment, injured part of body, type of accident, agency of accident, and collection process. Results show that most injuries occur in workers in their 50s and older. This study also shows that 51.4% of injuries occur at businesses with 49 employees or fewer. Injuries to waste collectors happen most often when workers are electrocuted after slipping on the ground. The second most prevalent form of injury is falling, which usually happens when workers hang from the rear of the truck during transportation or otherwise slip and fall from the truck. Work-related illnesses amongst waste collectors are mostly musculoskeletal conditions due to damaging postures. Conclusion: These findings will be instructive in devising policies and guidelines for preventing workplace injuries and work-related illnesses of HWCs.

• 한국안전학회지
• /
• 제39권2호
• /
• pp.9-21
• /
• 2024

Static-electricity-induced fires and explosions persistently occur every year, averaging approximately 80 and 20 cases annually according to fire statistics provided by the National Fire Agency and industrial accident statistics provided by the Ministry of Employment and Labor, respectively. Despite the relatively low probabilities of these accidents, their potential risks are high. Consequently, effective risk assessment methodologies and accident investigation strategies are essential for efficiently managing static-electricity hazards in fire- and explosion-prone areas. Accordingly, this study aimed to identify the causal variables essential for accident investigations, thereby facilitating risk assessments and the implementation of effective recurrence prevention measures to mitigate static-electricity hazards in fire-and explosion-prone regions. To this end, industrial accident statistics recorded over the past decade (2012 to 2021) by the Ministry of Employment and Labor were analyzed to identify major fire and explosion incidents and related industrial accidents wherein static electricity was identified as a potential ignition source. Subsequently, relevant investigation reports (63 cases) were thoroughly analyzed. Based on the results of this analysis, existing electrostatic fire and explosion risk assessment techniques were refined and augmented. Moreover, factors essential for investigating electrostatic fire and explosion disasters were delineated, and the primary causal variables necessary for effective risk assessments and scientific investigations were derived.

• 대한안전경영과학회지
• /
• 제5권3호
• /
• pp.1-10
• /
• 2003

Accident analyses are used to identify common factors contributing to occupational accidents and to give recommendations for accident prevention. In this study we developed a human error analysis system that can be used easily at the industries. This accident analysis system can be used to develop accident prevention programs to reduce human initiated accidents.