• 한국조리학회지
• /
• 제19권1호
• /
• pp.179-188
• /
• 2013

본 연구는 고아미로 만든 약과의 품질특성을 알아보고자 하였다. 밀가루에 고아미를 비율별로 첨가하여(100, 80:20, 60:40, 40:60, 20:80, 100) 약과를 만들고 집청전 후 무게, 경도, 수분 함량, 색도, 관능검사를 실시하였다(약과 반죽 14g: 12mm 몰드에 성형, 구운 온도: $160^{\circ}C$, 20Min., 집청: $60^{\circ}C$, 30Min.). 밀가루로 만든 약과의 집청전후의 무게가 가장 가벼웠고, 고아미의 첨가량이 증가할수록 약과의 무게가 유의적으로 무거웠다. 약과의 부피는 밀가루약과의 부피가 가장 컸고 고아미의 첨가량이 증가할수록 약과의 부피가 유의적으로 작아졌다. 수분 함량은 고아미 100%로만 만든 약과가 가장 컸다. 약과의 경도는 고아미를 첨가한 약과가 높았고, 씹힘성은 경도가 가장 낮은 밀가루로 만든 약과인 대조군이 가장 낮았고, 부착성과 탄력성, 검성과 응집성은 유의적인 차이를 보이지 않았다. 약과의 명도는 고아미의 첨가량이 증가할수록 낮아졌고, 적색도와 황색도는 고아미의 첨가량이 증가할수록 높아졌다. 고아미약과의 관능검사 결과 밀가루와 고아미가 비율별로 섞인 약과보다 오히려 밀가루만으로 만든 대조군이나 고아미만으로 만든 약과의 선호가 높았다. 또한 고아미 첨가량이 증가할수록 약과의 단맛이 강하고 촉촉하여 높게 선호되었다. 따라서 본 연구결과 밀가루를 대신하여 고아미쌀 만으로도 촉촉하고 팽화율이 비교적 높은 품질이 좋은 약과의 개발이 가능함을 알 수 있었다.

• 한국산업보건학회지
• /
• 제16권4호
• /
• pp.324-333
• /
• 2006

This study was designed to investigate the effect of bone demineralization and tibia lead on blood lead in retired lead workers. Two hundred thirty five(126 females and 109 males) retired lead workers who worked in 4 different lead factories and 101 non-occupationally lead exposed subjects(51 females and 51 males) were recruited from March 2004 to October 2004. Bone mineral density(BMD) was measured at left calcaneous bone area by broadband ultrasound attenuation(BUA) method with QUS-2(Metra Biosystems Inc, USA). The BUA value transformed into T-score by WHO standard conversion criteria. Tibia bone lead was measured for skeletal bone lead with K-xray fluorescence(K-XRF) and blood lead was analyzed with flameless atomic spectrophotometer. Hemoglobin, hematocrit, serum calcium and iron were also analyzed. In addition, information for smoking and drinking status and basic personal data such as age, gender and lead exposure were also collected using questionnaire inquiry. Blood lead was correlated with tibia lead (r=0.664) and these two variables were negatively correlated with BMD in bivariate analysis. BMD showed significant main effect on the change of blood lead independent to tibia lead without any effect modification of age or gender; the one T-score unit decrease of mineral bone density made $0.43{\mu}g/dl$ increase of blood lead. On the other hand, tibia lead showed effect modification with gender on blood lead; the slope of tibia lead on blood lead in male was steeper than in female and crossed at around zero of tibia lead. In the multiple regression analysis of blood lead and tibia lead on BMD after adjustment of related covariates, only blood lead showed statistically significant effect on BMD. This study confirmed that BMD and blood lead were significantly associated. To verify the causal association of BMD on blood lead and vice versa, further longitudinal studies are needed.

• 한국산업보건학회지
• /
• 제17권1호
• /
• pp.43-52
• /
• 2007

This study was designed to investigate the difference of airborne lead concentration by type of lead industries and type of lead exposure and to evaluate their association with lead biomarkers of lead workers in 11 lead using industries. Total of 182 lead workers (male: 167, female: 15) from 11 lead industries were participated for this study from March, 2004 to August, 2005. Airborne lead concentration were measured by representative personal sampling of workers in each unit workplace and applied same concentration value to the workers in the same unit workplace who did not measure their airborne lead with personal air sampling. Tibia lead, blood lead, zinc protoporphyrin in whole blood, ${\delta}$-aminolevulinic acid in urine, hemoglobin and hematocrit were selected as study variables of indices of lead exposure. Information about type of lead exposure (fume or non-fume other), age, work duration, smoking & drinking habit were also collected. Significant differences were seen in the means of zinc protoporphyrin, blood lead and tibia lead in lead workers by different airborne lead concentration in workplace. While blood lead and tibia lead in lead workers were significantly higher in secondary smelting than other types of lead industries, zinc protoporphyrin, ${\delta}$-aminolevulinic acid in urine and airborne lead concentration were significantly higher in litharge manufacturing. While the mean blood lead was significantly higher in the lead workers working in fume type unit workplace than those of non-fume lead workers, the mean airborne lead concentration of fume workers was significantly lower than non-fume lead workers. In the multiple regression analysis of airborne lead concentration and the type of lead exposure on tibia lead and lead exposure indices after adjustment of related covariates, airborne lead concentration was statistically significantly associated with blood lead and tibia lead, but the type of lead exposure was only associated with blood lead. To verify the causal association of airborne lead concentration on blood lead and tibia lead, further studies are needed.

• 한국환경보건학회지
• /
• 제37권6호
• /
• pp.450-459
• /
• 2011

Objectives: Biomarkers in urine are important in assessing exposures to environmental or occupational chemicals and for evaluateing renal function by exposure from these chemicals. Spot urine samples are needed to adjust the concentration of these biomarkers for variations in urine dilution. This study was conducted to evaluate the suitability of adjusting the urinary concentration of cadmium (uCd) and arsenic (uAs) by specific gravity (SG) and urine creatinine (uCr). Methods: We measured the concentrations of blood cadmium (bCd), uCd, uAs, uCr, SG and N-acetyl-${\beta}$-D-glucosaminidase (NAG) activity, which is a sensitive marker of tubular damage by low dose Cd exposure, in spot urine samples collected from 536 individuals. The value of uCd, uAs and NAG were adjusted by SG and uCr. Results: The uCr levels were affected by gender (p < 0.01) and muscle mass (p < 0.01), while SG levels were affected by gender (p < 0.05). Unadjusted uCd and uAs were correlated with SG (uCd: r = 0.365, p < 0.01; uAs: r = 0.488, p < 0.01), uCr (uCd: r = 0.399, p < 0.01; uAs: r = 0.484, p < 0.01). uCd and uAs adjusted by SG were still correlated with SG (uCd: r = 0.360, p < 0.01, uAs: r = 0.483, p < 0.01). uCd and uAs adjusted by uCr and modified uCr ($M_{Cr}$) led to a significant negative correlation with uCr (uCd: r = -0.367, p < 0.01; uAs: r = -0.319, p < 0.01) and $M_{Cr}$ (uCd: r = -0.292, p < 0.01; uAs: r = -0.206, p < 0.01). However, uCd and uAs adjusted by conventional SG ($C_{SG}$) were disappeared from these urinary dilution effects (uCd: r = -0.081; uAs: r = 0.077). Conclusions: $C_{SG}$ adjustment appears to be more appropriate for variations in cadmium and arsenic in spot urine.

• 한국산업보건학회지
• /
• 제11권1호
• /
• pp.34-41
• /
• 2001

Passive samplers have been used for personal, indoor, and outdoor air monitoring of VOCs at ppb concentrations in community and office environments. The path length of modified passive sampler was shortened, so it was intended to increase an uptake rate. The performance of the modified 3M 3500 organic vapor monitor(OVM) as a tool for assessing exposures to toxic air pollutants in nonoccupational community environments was evaluated using combined controlled test atmospheres of six selected target volatile organic compounds(VOCs): benzene, methyl tert-butyl ether(MTBE), chloroform, 1,4-dichlorobenzene, tetrachloroethylene, and toluene. The experiments were conducted by exposing the dosimeters to concentrations of $50{\sim}100{\mu}g/m^3$ on six face velocity(0.00, 0.02, 0.06, 0.12, 0.20, 0.30 m/sec) for 24 hours. If the uptake rate was increased, that means that we could use the passive sampler more effectively. The uptake rates were increased linearly according to reduce the path length. Although the diffusion path length was shortened, the change of uptake rate was within ${\pm}25%$ of theoretical value, indicating that the modified passive sampler(TM) can be effectively used over the range of concentrations and environmental conditions tested with a 24-h sampling period if the face velocities were over 0.12 m/s for 6 components of VOCs. But when the face velocities were less than 0.12 m/s, uptake rates were reduced more than expected values. So, the passive sampler with the shortened path length should be used at indoor or outdoor environment where the face velocity should be over about 0.10 m/s. If the path length was shortened more, the uptake rate was more effected by starvation.

• 한국산업보건학회지
• /
• 제3권1호
• /
• pp.22-36
• /
• 1993

This study was conducted to evaluate the charcoal tube sampling method for carbon disulfide in the air. Breakthrough was investigated according to flow rate, sampling time and air volume. Also the storage stability by storage method and time was investigated. The results are summarized as follows. 1. The samples stored at room temperature($28.2^{\circ}C$), refrigerator($3.8^{\circ}C$) and freezer($-15.6^{\circ}C$) were analyzed every week to five weeks. At one week storage at room temperature, 3.5% of $CS_2$ in the front section of the charcoal tube migrated into the back section and 57.7% at five weeks. The amount of $CS_2$ in the back section of the charcoal increased continuously by storage time. Migration of $CS_2$ was slow at refrigerator, and stopped occur at freezer. Recovery rate $CS_2$ was 52-82% at room temperature and 92-101% at refrigerator, based on the amount at freezer as a reference value. Thus loss was observed at room temperature. 2. When 6-48 L of fresh air were passed through tubes with spiked amounts of 0.379 and 0.759mg sample, the amounts of $CS_2$ in the back section of charcoal were 5.7-132.4 and 0-92% of the amount in the front section, respectively. The total recovery rates of$CS_2$ from 0.379 and 0.759mg spiked sample were 35.7-101.0% and 9l.3-100.1%, respectively. $CS_2$ loss was observed in 0.379mg spiked sample, but not in 0.759mg spiked sample. In the spiked samples, the amount of $CS_2$ in the back section of charcoal was not affected by flow rate when the air volume was controlled. The amount of $CS_2$ in the back section of charcoal increased over sampling time. And the faster the flow rate, the more the migration amount when the sampling time was the same. 3. A known concentration, 10 ppm of $CS_2$, was produced in a 200 L Tedlar bag. When the air volume was 24, 36, 48 L, breakthrough was 5.8, 16.9, 47.4%, respectively. The sampling flow rate of 0.05, 0.1, 0.2 Lpm did not change the breakthrough rate. Breakthrough increased over sampling time. And the faster the flow rate, the more the breakthrough, when the sampling time was the same.

• 한국안광학회지
• /
• 제4권2호
• /
• pp.129-133
• /
• 1999

굴절이상인 근시안의 종류별 분포는 전체 대상자 100명 중 단순근시 50%, 근시성 복난시 16%, 근시성 단난시 15%, 혼합난시 19%의 순으로 나타났다. 양안 굴절이상인 근시의 분포는 -0.50~-2.00Dptr가 전체 대상자중 35%, -2.00~-6.00Dptr가 54%, -6.00Dptr이상이 11%로 나타났다. 연령별 근시성 굴절이상의 분포는 15세~20세가 54%, 21세~40세가 22%, 41~60세다. 16%, 61 세 이상이 10%였다. 근시성 굴절이상도의 직업분포는 학생(중, 고, 대학)이 61.5%, 사무직 13.5%, 주부 및 상업이 15%로 분포되어 나타났다. 하루중 굴절이상에 영향을 많이 미치는 시각때는 저녁인 오후 7시 이후가 45%로 가장 높게 나타났다. 그 이유는 오전에는 각막이 평평해져서 근시도가 줄어들고 오후에는 그 반대가 되어 Sph -0.50D의 차이가 나기 때문이며, 어두워질수록 동공이 확대되면서 각막이 주변부에서 굴절되는 빛의 굴절도가 큰 것이 이유가 된다. 계절별로는 땀의 배출로 인한 인체에서의 영양섭취와 배출의 부족함으로 인한 여름이 근시도수를 증가시켜 68%로 나타났다. 혈액형 별로는 A형과 B형이 34%로 비슷하게 분포되었으며, 남성은 활동적인 O형이 여성에 비해 근시도수가 높게 측정되었다.

• 한국콘텐츠학회논문지
• /
• 제18권5호
• /
• pp.600-611
• /
• 2018

본 연구에서는 한국노동패널 데이터를 이용하여 글로벌 금융위기 이후 임금근로자의 일 만족도, 생활만족도와 이직의도의 영향관계와 고용형태의 조절효과를 분석하였다. 분석결과, 직무만족도가 높으면 이직의도는 감소하였으나 직무환경만족도와 생활만족도는 높을수록 이직의도도 높아지는 것으로 나타났다. 이는 직무환경에 만족할수록 자신이 가진 경험, 경력 등을 활용하여 더 나은 기회를 찾고자 하는 경향이 더 높기 때문이거나 또는 자유로운 일자리를 선호하는 직업가치 변화가 반영되었기 때문으로 볼 수 있다. 생활만족도가 높으면 이직의도가 증가하는 것은 직무 이외 생활에 만족할수록 근무환경 등에 대한 기대치가 높아 이직의도가 높아지는 것으로 해석할 수 있다. 통제변수로서 연령이 높을수록, 학력이 높을수록, 정규직이면 이직의도는 감소하는 것으로 나타나고 있다. 또한, 직무만족도, 직무환경만족도, 생활만족도와 정규직 여부와의 상호 작용항은 모두 유의하여 고용형태가 조절효과를 가짐을 보여주고 있다. 정규직 여부는 직무만족도와 이직의도 관계에서 양의 조절효과를, 직무환경만족도 및 생활만족도와 이직의도의 관계에서는 음의 조절효과를 보이고 있다. 직무만족도와 정규직 자체는 이직의도를 낮추나 두 변수가 통제된 이후 정규직이라면 오히려 새로운 직장 구직가능성도 높아져 이직의도에는 양의 조절효과를 보이는 것으로 해석할 수 있다. 직무환경만족도와 생활만족도가 이직의도에 미치는 양의 영향에 정규직이 음의 조절효과를 보인다는 것은 그나마 정규직이라는 신분이 직무환경만족도와 생활만족도가 이직의도를 높이는 효과를 줄여준다는 것을 의미한다고 할 수 있다. 하지만 직무만족도, 직무환경만족도, 생활만족도와 이직의도의 관계, 또한 정규직 여부의 조절효과에서 나타나는 이러한 결과는 측정변수의 한계 등에서 비롯된 것일 수도 있기에 추후 지속적인 심층적 연구가 필요하다.

• 대한치과교정학회지
• /
• 제29권4호
• /
• pp.491-501
• /
• 1999

본 연구는 석고모형 분석 중 치아크기 측정시 발생할 수 있는 오차를 줄이고 측정의 재현도와 정확성을 향상시키는데 도움이 될 수 있는 방안을 모색하고자 시행되었다. 치아밀집 치열 특징을 지닌 상하악 20조의 석고모형을 대상으로 하여, 5명의 조사자가 각 치아의 근원심 폭경을 디지털 버니어 캘리퍼스를 사용하여 2주 간격으로 3회 측정하여 실험측정치를 얻은 다음, 측정에 이용된 석고모형을 근원심 접촉점 부위에서 개개 치아로 분리한 후, 마이크로미터를 이용하여 측정한 표준치와 비교$\cdot$분석하여 다음과 같은 결과를 얻었다. 1. 3회 측정에 따른 재현도는 조사자별 치아별로 큰 차이를 나타내지 않았다. 2. 표준치와 비교한 계측오차는 조사자별 또는 치아별로 차이를 보였다. 3. 표준치와의 오차는 전치에서 구치로 갈수록 증가하여 제1대구치에서 가장 큰 차이를 나타내었다. 4. 표준치와 비교시 전반적으로 작게 측정하는 경향을 보였으며 이에 대한 치아별, 조사자별 차이가 두드러졌다. 5. 전반적인 오차 발생 정도는 치아밀집 정도와 유의한 상관성을 보이지 않았다. 이상의 결과는 교정증례 분석시 치아크기 계측오차 발생 가능성의 고려가 필요함을 시사하였다.

• 한국산업보건학회지
• /
• 제7권2호
• /
• pp.245-263
• /
• 1997

For twelve solvent thinners, evaporation rates of components were investigated and models to estimate the actual concentration have been evaluated. Also, the current ACGIH TLVs (Threshold Limit Values) for the concentration of organic mixtures have been adjusted. The results of this study are summarized as follows : 1. Airborne concentrations of solvent thinner components were related to their respective vapor pressure (r=0.96). On the other hand, there was no significant relation between the concentrations in the air of the thinner compounds and the original amount in liquid form. 2. Airborne concentrations of each chemical were estimated by temperature at $8.5{\pm}1$, $16.7{\pm}1$ and $31.5{\pm}2^{\circ}C$ with an air velocity of 1.5 m/s. The concentrations were increased by increasing temperature (p<0.05). The percentage of concentrations were proportionate to their respective percentage of vapor pressure. Among the chemicals studied, n-butyl acetate, n-butyl alcohol, m-xylene, p-xylene and o-xylene showed a clear relationship to temperature. 3. Airborne concentration of each chemical was estimated by air velocity at 0.05, 1.50 and 2.50 m/s, with a constant temperature at $17{\pm}2^{\circ}C$. The concentrations were increased by increasing air velocity (p<0.05). The percentage of concentrations were proportionate to their respective percentage of vapor pressure. Among the chemicals studied, n-butyl alcohol, m-xylene and p-xylene showed a clear relationship to velocity. 4. In estimating the concentrations of solvent thinners by temperature and air velocity, ACGIH TLVs for mixtures tended to be larger than the values obtained by ACGIH exposure index. It shows that ACGIH TLVs for mixtures are not adequate for evaluating the airborne concentration of thinners and other organic mixtures. 5. The evaporation rate of the thinners were compared to the theoretical equations of Hummel, Braun and Mackay. The Hummel and Braun methods were close to exposure index but Makay's showed an underestimated value. In order to see the accuracy of each three models, the SSE (Error Sum of Squares) calculated for Hummel's was 1.73, being the closest to the actual values. 6. Present ACGIH TLVs for mixtures are not appropriate evaluate industrial environments. In this study, a correction of TLVs using vapor pressure of respective components was suggested. In order to evaluate the corrected TLVs a paired t-test was performed. There was no significant difference between the exposure index and the concentration over suggested TLVs (p>0.05). Thus, this corrected TLVs seem appropriate in order to evaluate actual industrial workplaces organic chemical concentration in the air.