• Journal of Radiation Protection and Research
• /
• v.38 no.1
• /
• pp.44-51
• /
• 2013

ICRP recommended that cosmic ray exposure to the pilot and cabin crew would be considered as an occupational exposure due to their relatively high exposure. Since 2012 with the Act No. 10908 (Natural radiation management), the guideline of cosmic ray exposure to the pilot was established in Korea. The applicability of the solid-state nuclear track detector for personal dose assessment of pilot and cabin crew was evaluated. Dose linearity and angle dependence of dosimeters to the neutron were evaluated by $^{252}Cf$ neutron emitting source. The track density has a good agreement with the dose ($r^2$=0.99) and highly dependent on the degree of an angular of the dosimeter to the neutron source. In addition, the dosimeters (SSNTD) were exposed to cosmic ray in an aircraft during its cruising for more than two months in collaboration with Airline Pilots Association of Korea. Although the correlation between the track density from aircraft cruising altitude and expected neutron dose is low, however RSNS dosimeter could be used for personal neutron dosimeter. For application of RSNS as a personal dosimeter for pilot and cabin crew, additional studies are required.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.16-27
• /
• 2019

A burning test was conducted on the smoke and combustion gases generated from cypress wood treated with sodium silicate, 3-aminopropyltrimethoxysilane sol, 3-(2-aminoethylamino)propylmethyldimethoxysilane sol, and 3-(2-aminoethylamino) propyltrimethoxysilane sol. The silicone compound sol was applied to each of the cypress wood specimens three times with a brush. The smoke and combustion generation gas were analyzed using a cone calorimeter (ISO 5660-1) and the smoke was also evaluated by applying new smoke risk assessment method. The smoke performance index (SPI) of the cypress treated with silicone compound increased 1.66 to 8.42 times and the smoke growth index (SGI) was 11.8 to 88.2%, respectively. The smoke intensity (SI) is expected to be 1.0~50.5% lower than that of the base specimens, resulting in lower smoke and fire hazards. The third maximum carbon monoxide (CO_peak) concentration of the specimens treated with silicone compounds was 22.5~33.3% lower than that of the base specimens. On the other hand, it produced potentially fatal toxicity that was 1.48~1.72 times higher than the US Occupational Safety and Health Administration (OSHA) acceptance standard (PEL). Cypress wood itself produced a high carbon monoxide concentration, but the silicon compound played a role in reducing this level.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.4
• /
• pp.513-518
• /
• 2014

Purpose: This study was to investigate color distortion by colors and luminous transmittance of lenses with word-color test included in computerized neurocognitive function test (CNT). Methods: 32 subjects aged $21.97{\pm}1.58$ years with no ocular disease and color vision deficiency were selected. Four colors of tinted lenses, which were red, green and blue included in the primary colors of light and pink, and word-color test in CNT to evaluate changes in cognitive function by color distortion were used. Results: Response time was not significantly increased in green, blue, and pink among four colors, but significantly increased in only red color. And response time was significantly increased below 46% of luminous transmittance in red color. Conclusions: It should be cautious and careful of the red-tinted lens choice because red color with below 46% of luminous transmittance can distort colors of objects, and it could be related to safety problem. It is suggested that word-color test could be extensively used for further studies on color recognition.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.5
• /
• pp.637-644
• /
• 2011

Objective & Background: When applying various evaluation tools that analyze work posture risk through observation, accurate measurement of body flexion angle is very important. Method: This study investigated differences and appropriateness of 5 different existing reference points commonly used in the analysis of the work posture. Twenty five ergonomist and trained professionals were participated in this study. A Same flexion angle was utilized for the evaluation of risk assessment of musculoskeletal disorders using five different reference points to investigate the degree of difference between them. To investigate how different the observers' preferred flexion angle measuring methods were compared to the ISO 11226 Reference Posture, a virtual body model was constructed using the Poser 6.0 program. Six types of body flexion postures were constructed, and since neck flexion differs according to body angle, five types of neck flexion postures were constructed with the trunk bending $20^{\circ}$ forward, making up a total of 30 virtual flexion postures. Results: Results showed that the observers used personally preferred reference points instead of reference points recommend in the evaluation tools. Also the results revealed the their seems to be 6 types of flexion angle for the trunk and 11 types of measurement methods for the neck flexion angle in the form of personally preferred reference points. The results showed that a mean difference of $14^{\circ}$($4{\sim}23^{\circ}$) occurred in the trunk, and a mean difference of $20^{\circ}$($-8{\sim}51^{\circ}$) occurred in the neck. To increase accuracy when using the 5 evaluation tools in combination, the ISO 11226 standards, observers' preferred flexion posture standards, and common flexion posture standards of the evaluation tools were compared with the reference points of the 5 evaluation tools. Results showed considerable variance in angle difference for each evaluation tool. Conclusion: According to the results of this study, considering the angle difference between the flexion angle reference points of the evaluation tool and the reference points selected by the observers, it is concluded that instead of personally preferred reference points, the standardized reference points to enhance the accuracy and the objectivity. Application: The result of this study can be used as reference guide to develop the standardized reference point in the future.

• Journal of agricultural medicine and community health
• /
• v.29 no.2
• /
• pp.249-263
• /
• 2004

Objectives: The objectives of the present study were to establish the exposure monitoring method of chlorpyrifos and chlorothalonil application to pear and field red pepper by vehicle-mounted sprayer, hand-held sprayer and to assess the risk. Methods and Results: Chlorpyrifos met all of requirements of sampling and analysis method(U.S. EPA), but chlorothalonil met only dermal patch method. Potential dermal and inhalation exposure was evaluated in 42 farmers. Compared with the hand-held sprayer application, vehicle mounted sprayer demonstrated producing relatively lower dermal exposure levels with statistical significance. In dermal exposure during hand-held application, there is no significant difference between pear and red pepper. Conclusions: This results show that application method is the main factor of dermal exposure. There was no statistically significant difference between each group of respiratory exposure level. The margin of safety (MOS) was calculated to assess the risk of pesticide exposure. All Chlorpyrifos MOS values are lower than 0.2, which mean working conditions are unsafe. In order to protect farmers, big efforts to control exposure are needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1118-1125
• /
• 2014

The past IMF foreign exchange crisis and subprime financial crisis had a big influence on variability of macroeconomics, even if the origin of its occurrence might be different. This not only had a significant infrequence on the overall industries, but also produced many insolvent companies by being closely linked with a management environment of an individual construction company leading the construction industry. The purpose of this research is to investigate characteristics of management condition of construction company according to the size of construction company using KMV model developed on the basis of the Black & Scholes option pricing theory. This research has set 28 construction companies listed to KOSPI/KOSDAQ for applying the KMV model and measuring the level of the default risk of construction companies. The data was retrieved from TS2000 established by Korea Listed Companies Association (KLCA), Statistics Korea. The analysis period is between first quarter of 2004 and fourth quarter of 2010. This research examine characteristics of the level and fluctuation process of the management condition of construction company according to the size of construction company.

• Journal of the Korean Institute of Gas
• /
• v.7 no.2 s.19
• /
• pp.33-41
• /
• 2003

There exists high hazard when transporting LPG as well as using, storing, and producing. For small scale LPG consumer, retailers deliver LPG to customers via a truck loading many LPG cylinders. Suppose there occurred a accident during LPG cylinder transfer, this could result in serious damages to the life and properties in the near or neighbor of the accident spot. In this regard, we made a quantitative risk analysis to estimate the possible damages and the probability through the identification of accidents causes and the simulation of the possible scenario. In this study, we made the Excel & Visual Basic computer program to perform quantitative LPG accident analysis. The simulation showed the following results. In case of UVCE(Unconfined Vapor Cloud Explosion), the effect within l0m of the accident spot showed very severe structural damages and even the accident can break the window glasses of the area of 150 m apart from accident spot. In case of TNT corresponding probit analysis, after 10 minutes LPG leaking, $75\%$ window glasses of 40 m distance was expected to be broken. And $16\%$ frames of 20m distance, $10\%$ frames of 40m distance was expected to be collapsed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.3
• /
• pp.257-264
• /
• 2012

Objectives: This study's aims were to evaluate the effects of load center of gravity within an object lifted and feet placements on peak EMG amplitude acting on bilateral low back muscle groups, and to suggest adequate foot strategies with an aim to reducing low back pain incidence while lifting asymmetric load. Methods: The hypotheses that asymmetric load imposes more peak EMG amplitude on low back muscles contralateral to load center of gravity than symmetric load and maximum peak EMG amplitude out of bilateral ones can be relieved by locating one foot close to load center of gravity in front of the other were established based on biomechanics including safety margin model and previous researches. 11 male subjects were required to lift symmetrically a 15.8kg object during 2sec according to each conditions; symmetric load-parallel feet (SP), asymmetric load-parallel feet (AP), asymmetric load-one foot contralateral to load center of gravity in front of the other (AL), and asymmetric load-one foot ipsilateral to load center of gravity in front of the other (AR). Bilateral longissimus, iliocostalis, and multifidus on right and left low back area were selected as target muscles, and asymmetric load had load center of gravity 10cm deviated to the right from the center in the frontal plane. Results: Greater peak EMG amplitude in left muscle group than in right one was observed due to the effect of load center of gravity, and mean peak EMG amplitudes on both sides was not affected by load center of gravity because of EMG balancing effect. However, the difference of peak EMG amplitudes between both sides was significantly affected by it. Maximum peak EMG amplitude out of both sides and the difference of peak EMG amplitude between both sides could be reduced with keeping one foot ipsilateral to load center of gravity in front of the other while lifting asymmetric load. Conclusions: It was likely that asymmetric load lead to the elevated incidence of low back pain in comparison with symmetric load based on maximum peak EMG amplitude occurrence and greater imbalanced peak EMG amplitude between both sides. Changing feet positions according to the location of load center of gravity was suggested as one intervention able to reduce the low back pain incidence.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3260-3269
• /
• 2014

The construction industry has strong ties with other industries, and so construction company insolvency also has a strong influence on other industries. Prediction models addressing the insolvency of construction company have been well studied. Although factors contributing to insolvency must precede those of predictions of insolvency, studies on these contributing factors are limited. The purpose of this study is to analyze the influence of changes in the housing market on construction company insolvency by using the Vector Error Correction Model. Construction companies were divided into two groups, and the expected default frequency(EDF), which indicates insolvency of each company was measured through the KMV model. The results verified that 10 largest construction companies were in a better financial condition compared to relatively smaller construction companies. As a result of conducting impulse response analysis, the EDF of large companies was found to be more sensitive to housing market change than that of small- and medium-sized construction companies.

• Journal of Convergence for Information Technology
• /
• v.11 no.11
• /
• pp.204-209
• /
• 2021

This study is a data analysis study to identify the factors influencing the prevalence and risk factors for falls of older adults with dementia in Korea. Using the data of the 7th Aging Research Panel in 2018, 119 people were enrolled. We used response data on the dementia-related factors that is the duration of dementia and whether or not activity of daily living was restricted due to dementia. For comorbid diseases, data on hypertension, diabetes, and obesity were used. For statistical analysis of the collected data, logistic regression analysis was performed using SPSS statistics 22.0. Dementia-related factors and comorbidities of the analyzed subjects had a significant effect on the falling index. In particular, it was found that the influence was greatest in the order of obesity, diabetes, hypertension, daily life restrictions due to dementia, and the duration of dementia. This study is meant to identify factors that should be prioritized in the composition of a fall prevention program for the elderly with dementia. Based on the findings of this study, strategies for preventing falls due to the duration of dementia and limiting daily life, intensive management of high-risk groups for falls due to comorbid diseases, and training in the use of safety aids such as walking aids will be required in the care of the elderly with dementia,