• Safety and Health at Work
• /
• v.9 no.2
• /
• pp.224-231
• /
• 2018

Background: Organizations are pursing complex and diverse aims to generate higher profits. Many workers experience high work intensity such as workload and work pressure in this organizational environment. Especially, psychological burden is a commonly used term in workplace of Republic of Korea. This study focused on defining the psychological burden from the perspective of occupational safety and health and tried to develop a scale for psychological burden. Methods: The 48 preliminary questionnaire items for psychological burden were prepared by a focus group interview with 16 workers through the Copenhagen Psychosocial Questionnaire II and Mindful Awareness Attention Scale. The preliminary items were surveyed with 572 workers, and exploratory factor analysis, confirmatory factor analysis, and correlation analysis were conducted for a new scale. Results: As a result of the exploratory factor analysis, five factors were extracted: organizational activity, human error, safety and health workload, work attitude, and negative self-management. These factors had significant correlations and reliability, and the stability of the model for validity was confirmed using confirmatory factor analysis. Conclusion: The developed scale for psychological burden can measure workers' psychological burden in relation to safety and health. Despite some limitations, this study has applicability in the workplace, given the relatively small-sized questionnaire.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.2
• /
• pp.119-130
• /
• 2010

Pulmonary toxicity of talc containing tremolite asbestos (TCT) has been studied in term sequential in Sprague-Dawely rats. UICC chrysotile(average diameter 0.03${\mu}m$, average length 2.93${\mu}m$) was applied as the positive control. TCT was analyzed for its physicochemical properties by transmission electron microscope equipped with energy dispersive X-ray spectrometer(TEM-EDS). The effects of 2mg TCT(talc average diameter 9.7${\pm}$8.4${\mu}m$; tremolite average diameter 1.6${\pm}$1.6${\mu}m$, average length 10.8${\pm}$7.0${\mu}m$) on pathological changes were evaluated after 1, 8 weeks instilled into rat lungs. 2mg Chrysotile continuously affected lung pathological changes. Inflammation and granuloma response broke out from 1 week after instilled with chrysotile and the pathological examination further showed increased legions of lung after 8 weeks. But TCT did not showed lung pathological changes. The biopersistence of TCT and chrysotile was evaluated by TEM- EDS. Whereas chrysotile continuously have retained to 8 weeks instilled into rat lungs, talc of TCT showed statistically significant decrease of diameter from 1 weeks and statistically significant change in Si atomic % compositions at 8 weeks instilled into rat lungs. Physicochemical properties of tremolite of TCT were not affected until 8 weeks instilled into rat lungs. This study showed that the durability of TCT in the lungs is much weaker than chrysotile.

• Safety and Health at Work
• /
• v.3 no.1
• /
• pp.58-66
• /
• 2012

Objectives: The purpose of this study was to review clinical characteristics and working environments of sudden cardiac death (SCD) cases associated with a tire manufacturer in Korea, and review possible occupational risk factors for cardiovascular disease including nanoparticles (ultrafine particles, UFPs). Methods: We reviewed (i) the clinical course of SCD cases and (ii) occupational and non-occupational risk factors including chemicals, the physical work environment, and job characteristics. Results: Possible occupational factors were chemicals, UFPs of rubber fume, a hot environment, shift work, overworking, and noise exposure. The mean diameter of rubber fume (63-73 nm) was (larger than diesel exhaust [12 nm] and outdoor dust [50 nm]). The concentration of carbon disulfide, carbon monoxide and styrene were lower than the limit of detection. Five SCD cases were exposed to shift work and overworking. Most of the cases had several non-occupational factors such as hypertension, overweight and smoking. Conclusion: The diameter of rubber fume was larger than outdoor and the diesel exhaust, the most well known particulate having a causal relationship with cardiovascular disease. The possibility of a causal relation between UFPs of rubber fume and SCD was not supported in this study. However, it is necessary to continue studying the relationship between large sized UFPs and SCD.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.2
• /
• pp.175-189
• /
• 2018

Objectives: In this study, we analyze statistics on industrial accidents caused by chemical skin contact and provide skin toxicity hazard information on the related domestic system and circulation volumes. Methods and Results: We analyzed occupational fatalities and skin diseases caused by chemical leaks and contact from 2007 to 2016(10 years) and surveyed data on occupational skin diseases using the 2014 work environment survey data. The NIOSH Skin Notation Profiles for 57 chemical substances, which are provided to prevent occupational skin diseases, were searched and hazard information on skin contact with chemical substances was classified. In order to identify skin toxicity information among domestically distributed and legally regulated substances and to investigate skin-toxic substances, MSDS basic data on 19,740 chemical substances provided on the homepage of Korea Occupational Safety & Health Agency were searched. Acute toxicity(dermal) category 1-4 substances totaled 1,020, and the number of chemical substances classified as category 1 and 2 substances were 135 and 137, respectively. In the chemical substances prescribed by the Ministry of Employment and Labor, 173 substances were classified into acute toxicity(dermal) categories 1-4, 58 of which correspond to category 1 or 2. Conclusions: Within the present range of industrial accidents, the proportion of skin diseases due to contact with chemicals is not high. However, there is always a risk of occupational skin diseases due to increasing chemicals and due to the use of new chemicals. It is hoped that this information will be used by workplace safety and health officials and health and safety experts to prevent acute toxity(dermal) due to chemical skin contact.

• Safety and Health at Work
• /
• v.2 no.3
• /
• pp.290-300
• /
• 2011

Objectives: There is limited data regarding the toxicity of methylcyclohexane, despite its wide use in rubber adhesives, paint diluents, and cleansing agents. This study aimed to verify the toxicity and influence on the reproductive system of methylcyclohexane after its repeated injection in Sprague Dawley (SD) rats. Methods: Methylcyclohexane was injected subcutaneously into male and female SD rats once a day, five times a week, for 13 weeks at different doses (0, 10, 100, and 1,000 mg/kg/day) for each group. The toxicity of testing material was verified by observing the change in body and organ weight, hematological change, pathological findings, and effect on the reproductive system at each different concentration. Results: In the 1,000 mg/kg/day group, there were cases of animal deaths. In animals that survived, hematological changes, including a decrease in the red blood cell count, were observed. A considerable weight gain or loss and pathological abnormalities in the liver, kidney, and other organs were found. However, the 10 and 100 mg/kg/day groups did not cause deaths or other specific abnormalities. In terms of reproductive toxicity, there were changes in hormone levels, including a significant decrease in hormones such as estradiol and progesterone (p < 0.001) in male animals. Menstrual cycle change for female animals did not show concentration dependency. Conclusion: When injected repeatedly for 13 weeks, methylcyclohexane proved to be toxic for the liver, heart, and kidney at a high dose. The absolute toxic dose was 1,000 mg/kg/day, while the no observed adverse effect level was less than 100 mg/kg/day. The substance exerted little influence on the reproductive system.

• Safety and Health at Work
• /
• v.4 no.2
• /
• pp.111-116
• /
• 2013

Background: The aim of this study was to evaluate the quality of the Second Korean Working Conditions Survey (KWCS), focusing on its validity and reliability. Methods: The external validity was evaluated by the assessment of sampling procedures and the response rate, in order to investigate the representativeness of the sample. The content validity was evaluated by the assessment of the development of the questionnaire, and the consistency of questions for the selected construct. The test-retest method was used to evaluate the reliability by means of a phone call survey of 30% of the respondents, who were randomly selected. The respondents' satisfaction regarding the survey procedures and interview time were analyzed to evaluate the quality of survey data. Results: The external validity was assured by an acceptable sampling procedure, rigid multi-stage stratified cluster random sampling. The content validity was also guaranteed by a reasonable procedure for the development of the questionnaire with a pretest. The internal consistency of the questions for work autonomy was maintained, with 0.738 of Cronbach's alpha. The response rate of 36% was lower than that of the European Working Conditions Survey (EWCS), with a contact rate of 66%, compared to 76% for the EWCS. The matching rates of the five retested questions were more than 98% reliable. Conclusion: The quality of the second KWCS was assured by the high external and content validity and reliability. The rigid sampling procedure and development of the questionnaire contributed to quality assurance. The high level of reliability may be guaranteed by the sophisticated field survey procedures and the development of a technical manual for interviewers. The technical strategies for a high response rate should be developed for future surveys.

• Safety and Health at Work
• /
• v.2 no.2
• /
• pp.135-147
• /
• 2011

Objectives: The purpose of this study was to evaluate cancer risks in the Korean semiconductor industry. Methods: A retrospective cohort study was performed in eight semiconductor factories between 1998 and 2008. The number of subjects was 113,443 for mortality and 108,443 for incidence. Standardized mortality ratios (SMR) and standardized incidence ratios (SIR) were calculated. Results: The SMR of leukemia was 0.39 (95% Confidence Interval 0.08-1.14) in males (2 cases) and 1.37 (0.55-2.81) in females (7 cases). The SMR of non-Hodgkin's lymphoma (NHL) was 1.33 (0.43-3.09, 5 cases) in males and 2.5 (0.68-6.40, 4 cases) in females. The SIR of leukemia was 0.69 (0.30-1.37, 8 cases) in males and 1.28 (0.61-2.36, 10 cases) in females. The SIR of NHL in females was 2.31 (1.23-3.95, 13 cases) and that of thyroid cancer in males was 2.11 (1.49-2.89, 38 cases). The excess incidence of NHL was significant in female assembly operators [SIR=3.15 (1.02-7.36, 5 cases)], but not significant in fabrication workers. The SIR of NHL in the group working for 1-5 years was higher than the SIR of NHL for those working for more than five years. The excess incidence of male thyroid cancer was observed in both office and manufacturing workers. Conclusion: There was no significant increase of leukemia in the Korean semiconductor industry. However, the incidence of NHL in females and thyroid cancer in males were significantly increased even though there was no definite association between work and those diseases in subgroup analysis according to work duration. This result should be interpreted cautiously, because the majority of the cohort was young and the number of cases was small.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2005.05a
• /
• pp.115-115
• /
• 2005

• Environmental Mutagens and Carcinogens
• /
• v.21 no.1
• /
• pp.57-62
• /
• 2001

Bacterial reverse mutation assays were performed for 20 workplace chemicals in Korea, which were selected among workplace chemicals under the Korea Industrial Safety and Health Act (KISHA) with the occupational exposure levels (OELs). The assays were carried out by using the pre-incubation method ($37 ^{\circ}C$, 20 min) with and without metabolic activation using Salmonella typhimurium TA98, TA100, TA1535, TA1537 and E. coli WP2uvrA. The chemicals were tested at 5 concentrations both in the preliminary and the second assays. Despite the cell toxicities, there were no chemical-induced mutagenicities with or without metabolic activation in any of 20 chemicals.

• Safety and Health at Work
• /
• v.11 no.4
• /
• pp.500-508
• /
• 2020

Background: Research on the status of many chemicals used in the semiconductor industry is needed. The purpose of this study was to describe the overall status of chemical use in the semiconductor industry in Korea and to examine it from a health perspective. Methods: Data on the status of chemical use and safety data sheets at 11 of 12 major semiconductor workplaces in Korea were collected. The number of chemical products and chemical constituents, quantities of chemicals, and trade secret ingredients used, as well as the health hazards were examined. Results: On average, 210 chemical products and 135 chemical constituents were used at the surveyed workplaces. Among all chemical products, 33% (range: 16-56%) contained at least one trade secret ingredient. Most of the trade secret ingredients were used in the photolithography process. Several carcinogens, including sulfuric acid, chromic acid, ethylene oxide, crystalline silica, potassium dichromate, and formaldehyde were also used. Only 29% (39 of 135) of the chemical constituents had occupational exposure limits, and more than 60% had no National Fire Protection Association health, safety, and reactivity ratings. Based on the aforementioned results, this study revealed the following. First, many chemical products and constituents are being used in the semiconductor industry and many products contained trade secret ingredients. Second, many products contained significant amounts of carcinogenic, mutagenic, and reproductive toxicant materials. Conclusion: We conclude that protecting workers in the semiconductor industry against harm from chemical substances will be difficult, due to widespread use of trade secret ingredients and a lack of hazard information. The findings of the status of chemical use and the health and safety risks in semiconductor industry will contribute to epidemiological studies, safe workplace, and worker health protection.