• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.214-223
• /
• 2016

Implant-assisted removable partial denture (Implant-assisted RPD, IARPD), posterior edentulous extension areas of which obtains additional support and retention from implants, is attracting increasing interest. This case report presents a successful treatment on a partially edentulous patient with a severely canted occlusal plane resulted from a long-term use of posterior extended RPD. The full mouth was rehabilitated through a fixed prosthesis on maxilla and IARPD with zirconia occlusal surface on mandible, which allowed to achieve an esthetic occlusal plane with long-term stability and, ultimately, functionally satisfying outcome.

• Journal of Technologic Dentistry
• /
• v.11 no.1
• /
• pp.115-120
• /
• 1989

Many attempts for the compfrt, esthetics and improvement of Masticatory function of the patients with removable prosthesis have been made for several decades. The search for the ideal denture occlusion has been going on in an effort to find the tooth form which provides maximum denture stability and masticatory efficiency without damaging the health of the underlying bone. For the purpose, the basic concept of lingualized occlusion were suggested by payne(1941) and pound(1973) discussed a similar occlusal concept and used term " lingualized occlusion." The purpose of this literature study is to clarify and amplify a method to achieve bilateral balanced occlusion with the occlusal arrangement termed " lingualized occlusion." Lingualized occlusion can be achieved by use of anatomic teeth for the mandibular denture. Lingualized occlusion can be used in most denture combination. It is particulary helpful when the patient places high priority on esthetics but a nonanatomic occlusal scheme is indicated by oral conditions such a severe alveolar resorption, a class II jaw relationship or displaceable supporting tissue. Advantages of lingualized occlusion are summarized as follows : 1) Most of the advantages attributed to both the anatomic and nonanatomic forms are retained. 2) Cusp form is more natural in appearance compare to nonanatomic tooth form. 3) Good pnetration of the food bolus is possible. 4) Bilateral mechanical balanced occlusion is readily obtained for a region around arotric relation. 5) Bertical forces are centralized on the mandibular teeth. Lingualized occlusion provides a useful combination of several occlusal concept. Many. advantages of anatomic and nonanatomic occlusions are accomplished but the lingualized occlusal concept is not is not a panacea, and all other procedures still must be carefully excuted.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.6
• /
• pp.404-412
• /
• 2012

Purpose: The purpose of this study was to evaluate postsurgical facial hard tissue stability after orthognathic surgery with/without posterior impaction in skeletal class III malocclusion patients, and to evaluate the horizontal relapse tendency, according to changes in anteroposterior discrepancy and occlusal planes. Methods: Ninety patients, who had undergone orthognathic surgery in Pusan National University Dental Hospital, were enrolled in this study. Three main groups were classified as follows: Thirty patients underwent mandibular setback bilateral sagittal split ramus osteotomy (BSSRO) only (BSSRO group, BG); another thirty patients underwent mandibular setback BSSRO and Le Fort I osteotomy with posterior impaction (posterior impaction group, PG); and another thirty patients underwent mandibular setback BSSRO and Le Fort I osteotomy without posterior impaction (non-posterior impaction group, NPG). Preoperative (T0), immediate postoperative (T1) and six-month follow-up period (T2) lateral cephalograms were taken, and various parameters were measured. The analyses were done by linear and angular measurements between T0-T1 and T1-T2, to evaluate postsurgical facial hard tissue stability. Results: Mean horizontal relapse rates were distributed from 11.81% to 19.08%, and there were significant postsurgical changes (0.52 mm~2.44 mm) at the B point in all 3 groups. But, there were no statistical differences on relapse rate among BG, PG and NPG patients. Conclusion: In this study, the postsurgical stabilities of BSSRO and Le Fort I osteotomy with/without posterior impaction in skeletal class III malocclusion patients were acceptable. There were no significant statistical differences in mandibular stability according to changes in anteroposterior discrepancy and occlusal planes.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.6
• /
• pp.440-455
• /
• 2002

The final goal for an orthognathic surgery is a functional and esthetic achievement based on occlusion theory. All the dental treatment should be done with the occlusion in mind, though, they tend to be ignored with no good reason. We cannot think of occlusion without temporomandibular joint because it is the first clue to define an occlusion. As normal occlusion comes from the central tendency of distribution of population, we can get it by examining the population that closely meet the criteria of ideal occlusion. To perform proper occlusal function and to maintain the stability after treatment, the case must be finished in normal occlusion closer to ideal one. Our aim is to achieve the ideal occlusal scheme like the mutually protected occlusion with the best masticatory efficiency and the stability. The facial esthetics are influened by culture, race and the time in which human live. While the occlusal function rarely changes as time goes by, esthetics tend to do from one country to another. Orthodontists and maxillofacial surgeons should have solid sets of treatment goals to achieve the best facial esthetics and the ideal occlusion dictated by the joint. Doing orthognathic surgery, two factors aforementioned should be taken into account to establish the Surgical Treatment Objectives(STO). The doctors who are planning orthognathic surgery need to have a very logical and systematic thought process to make STO. The author examined 28 selected beautiful Korean female adults with normal skeleton with normal occlusion and analyzed the hard and the soft tissue relationship into five parts : dentomaxillary relationship, intermaxillary relationship, posture to hard tissue relationship, facial balance, and posture to soft tissue relationship. This study presents a sequential flow of diagnosis and treatment planning especially for surgical patients and it also can be applied to the nonsurgical patients.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.2
• /
• pp.231-239
• /
• 1995

When the complete denture is made, the record base for jaw relation is divided into temporary record base and permanent record base. However, The temporary record base include some disadvantages such as, the lackness of intimate contact between model and base, the lackness of retention during the jaw relation registration, When we obtained jaw relation the permanent record bases made from heat curing resin were utilized. We could get several advantages as follows : 1. The permanent record base provided intimate contact between the model and record base. 2. In fabricating occlusal rim on record base, the dimensional change of record base was little because the permanent record base was lesser influenced to thermal change of occlusal rim than the temporary record base. 3. At the stage of jaw relation, the retention of final denture could be early checked. 4. It could be able to get more accurate registration of jaw relation because all procedure were done on the same base during the jaw relation, artificial teeth arrangement, try-in, and final denture construction. 5. Although there was an inconvenience due to double curing procedure, the shrinkage rate in resin polimerization was relatively reduced so that more dimensional stability could be taken.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.328-334
• /
• 2020

Clinical remounting of complete denture is performed to refine occlusal harmony in maxillo-mandibular relation. It has been reported that patients who used adjusted dentures with clinical remounting felt less complications such as pain and discomfort in mastication. The purpose of this study was to assess effects of clinical remounting with case series. Seven patients with existing complete prosthesis were included. Clinical remounting procedure was done through interocclusal relation recording. In addition, occlusal force was measured with pressure indicating sensor and occlusal contact areas were evaluated with photo occlusion analysis. Occlusal contact areas of prosthesis were enlarged, while bite pressure was not increased. Hit and slide phenomenon of prosthesis was reduced concurrently. Clinical remounting procedure improved denture stability and increased occlusal contact area. Therefore, clinical remounting should be considered.

• The korean journal of orthodontics
• /
• v.34 no.3 s.104
• /
• pp.205-218
• /
• 2004

The aims of this study were to investigate the differences in the early craniofacial morphology of Class III malocclusions with good, fair and poor occlusal stability and to elucidate a key determinant for distinguishing the cases. Lateral cephalograms of 30 subjects with Class III malocclusion in the mixed dentition were analyzed at the start of treatment (mean age of $8.58\pm1.47$). All subjects were reevaluated after a mean period of $7.50\pm1.94$ years comprising active treatment and retention. At this time, the samples were divided into three groups: good (10 subjects), fair (10 subjects) and poor (10 subjects) occlusal stability groups. According to the results of ANOVA, there were significant morphological differences in the early stage among the good, fair and poor occlusat stability groups, especially in variables that represented the vertical skeletal relationships. As well, there were already more dental compensations in the poor occlusal stability group. Stepwise discriminant analysis on the measurements at the time of first observation identified only one predictive variable: AB to mandibular plane angle(AB-MP). With this discriminant function, $83.3\%$of the original grouped cases were correctly classified and the canonical correlation coefficient was 0.857. In conclusion, AB-MP can be a possible predictor for the eventual prognosis of early Class III treatment. If it is below 60, the prognosis of early Class III treatment is expected to be poor, while if it is above 65, a good prognosis is expected.

• The Journal of the Korean dental association
• /
• v.56 no.9
• /
• pp.503-511
• /
• 2018

Outcome of esthetic ceramic restorations are affected by tooth size, gingival contour, occlusal relationship, etc. For this reason, demand of orthodontic treatment before esthetic ceramic restoration is increasing. If a Bolton ratio discrepancy, a problem of the maxillary incisor's vertical position, a problem of inclination of anterior teeth, a pathogenic occlusion is existed, a pre-prosthodontic orthodontics should be accomplished. These problems can be satisfactory only after the prosthetic treatment is performed after orthodontic treatment. When orthodontic treatment is given, it should be treated with the following principle. 1. Treat it in the direction of functioning occlusion. 2. Keep the patient's stable occlusal scheme. 3. Treat the teeth by considering the average tooth size and Bolton ratio. Ortho-Prostho combined treatment with optimal treatment plan can lead a patient's function, esthetics, and long-term stability.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.347-353
• /
• 2018

Gradual attrition is a normal process of aging, but severe attrition causes occlusal disharmony, functional disorder and esthetic problems. The collapse of posterior support may cause attrition of anterior teeth, and loss of occlusal vertical dimension (OVD). And it induces the pathologic change of the TMJ, unaesthetic facial appearance and decreased masticatory function. In this case, 70 year-old male presented with decreased vertical dimension and esthetic problems due to worn dentition. Based on assessment of intraoral findings, diagnostic cast and radiographic examination, full-mouth rehabilitation with increase of OVD was planned. After 10 month follow-up, occlusal stability is maintained and through this procedure, satisfactory outcomes were achieved in esthetic and functional aspects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.4
• /
• pp.516-530
• /
• 1999

The current clinical technique for occlusal vertical dimension recording is based on marking the skin reference points on the patient's face and measuring between these points using caliper-like device. And it is difficult to achieve reliable measurements by this technique because of movable soft tissue. The purpose of this study is to reveal the stability of skin reference points by comparing the relative movement between extra-oral skin reference points and intra-oral reference points using X-ray fluoroscope. 10 test subjects were divided into 2 groups : Group I (natural dentition) and Group II (denture-wearer whose vertical dimension was lost) and Group III consists of identical test subjects to Group II with their upper denture removed and record base inserted. Attaching the 3 mm diameter steel ball to nose tip, lower lip, chin and to existing denture (or record base), fluoroscopic examination and recording were taken during 2 jaw opening and closing movements. After subsequent digitization using personal computer, 1219 still pictures with 0.1 second interval were made. Using the 2 dimensional graphic software, measurements between reference points were executed. Dividing the entire jaw movement into 3 ranges (total, 1st half opening, 2nd half opening), rate of movement and relative movement between extra-oral and intra-oral reference points were calculated and statistically analyzed. The results of this study are as follows. 1 Within the same experimental group, no statistical difference was found in the stability of skin reference between lower lip point and chin point during total range of jaw opening and closing movement (p>.05) 2. In the first half range of jaw opening, statistical difference was found between Group I (natural dentition) and Group II (denture wearer) (p<.05) Group I has greater skin reference stability than Group II. 3. In the first half range of jaw opening, statistical difference was found between Group I and Group III (record base wearer) (p<.05). Group I has greater skin reference stability than Group III. 4. In the first half range of jaw opening, no statistical difference was found in the stability of skin reference between Group II and Group III (p>.05). 5. In the second half range of jaw opening, no statistical difference was found in the stability of skin reference between any experimental groups (p>.05). 6. In patients with their occlusal vertical dimension lost, employing other measuring references rather than skin is recommended because of low stability.