• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.509-519
• /
• 2016

This study intends to examine how the subjective health perception of drinkers influences the depression trajectory change by using longitudinal data for elderly drinkers. This study has set up a balanced panel by combining the results from "Aging study panel research" conducted in the year 2006 (1st), 2008 (2nd), 2010 (3rd), 2012 (4th). A total of 543 elderly drinkers, who have responded to each research have been selected as targets for the final analysis. In the analyses, descriptive statistics and Latent Growth Modeling were conducted to examine the causal relationship between the observed and latent variables. The results are as follows: First, it was found that there was a negative correlation-with statistical significance-between the initial value of subjective health perception and the initial status of depression symptom. Second, there was a positive correlation between the initial value of subjective health perception and the changes of depression symptom. This indicates that elderly drinkers with high health perception usually have high degree of depression change; however, this does not mean it was statistically significant. Third, there was a statistically significant correlation between subjective health perception change and depression symptom change. It was found that the depression change level would be low if the subjective health perception change level was high. Thus, we can assume that the depression symptoms of elderly drinker c would slow down if the subjective health perception level increases.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.649-653
• /
• 1999

A magnetic fluid separation technology was confirmed to be very effective to remove the suspended solids (SS) from aquacultural recirculating water, In this study, the effects of operating variables on the characteristics of SS removal were investigated through the test runs using magnetite of 2 $\mu$m mean diameter as magnetic powder. Magnetic flocculation here formed by adsorbing fine magnetites on the surface of suspended solid was observed. The strength of magnet was of significance in determining the SS removal efficiency as well as the capacity of the equipment. In addition, the SS removal efficiency decreased with an increase in the superficial liquid velocity, but the effect became negligible when the mass ratio of magnetite to the suspended solids was higher than 1.0.

• Journal of Korean Medical Science
• /
• v.33 no.51
• /
• pp.325.1-325.10
• /
• 2018

Background: To evaluate survival outcomes and prognostic factors for overall survival (OS) in patients with metastatic renal cell carcinoma (mRCC) who received sunitinib (SU) and pazopanib (PZ) as first-line therapy in real-world Korean clinical practice. Methods: Data of 554 patients with mRCC who received SU or PZ at eight institutions between 2012 and 2016 were retrospectively reviewed. Based on the targeted therapy, the patients were divided into SU (n = 293) or PZ (n = 261) groups, and the clinicopathological variables and survival rates of the two groups were compared. A multivariable Cox proportional hazard model was used to determine the prognostic factors for OS. Results: The median follow-up was 16.4 months (interquartile range, 8.3-31.3). Patients in the PZ group were older, and no significant difference was observed in the performance status (PS) between the two groups. In the SU group, the dose reduction rate was higher and the incidence of grade 3 toxicity was more frequent. The objective response rates were comparable between the two groups (SU, 32.1% vs. PZ, 36.4%). OS did not differ significantly between the two groups (SU, 36.5 months vs. PZ, 40.2 months; log-rank, P = 0.955). Body mass index, Eastern Cooperative Oncology Group PS > 2, synchronous metastasis, poor Heng risk criteria, and liver and bone metastases were associated with a shorter OS. Conclusion: Our real-world data of Korean patients with mRCC suggested that SU and PZ had similar efficacies as first-line therapy for mRCC. However, PZ was better tolerated than SU in Korean patients.

• Journal of Korean Society of Forest Science
• /
• v.110 no.3
• /
• pp.419-430
• /
• 2021

This study investigated spatiotemporal trends of sediment-related disasters in North Korea from 1960 to 2019 and post-disaster recovery cases based on a literature review and satellite images. Results showed that occurrence status of sediment-related disasters was initially externally reported in 1995 (during the Kim Jongil era); their main triggering factor was heavy summer rainfall. Furthermore, forest degradation rate was positively correlated with population density (R² = 0.4347, p = 0.02) and occurrence number of sediment-related disasters was relatively high on the west coast region, where both variables showed high values. This indicates that human activity was a major cause of forest degradation and thus, significantly affected sediment-related disasters in mountain regions. Finally, sediment- related disasters due to shallow landslides, debris flow, and slow-moving landslides were observed in undisturbed forest regions and human-impacted forest regions, including terraced fields, opencast mines, forest roads, and post-wildfire areas, via satellite image analysis. These disaster-hit areas remained mostly abandoned without any recovery works, whereas hillside erosion control work (e.g., treeplanting with terracing) or torrent erosion control work (e.g., check dam, debris flow guide bank) were implemented in certain areas. These findings can provide reference information to expand inter-Korean exchange and cooperation in forest rehabilitation and erosion control works of North Korea.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.426-439
• /
• 2021

In this study, we compare the properties and estimate the durability of five oil colors that are the most popularly used colors in the conservation of oil paintings. A set of these colors was obtained form four manufacturers each, and their properties were analyzed by conducting deterioration experiments. Subsequently, we observed the colors and performed X-ray fluorescence analysis. As a result of colour observation and XRF analysis, it was confirmed that there are the differences according to the pigment types, mixing rations and the manufacturers even for colors having the same product name. The deterioration test indicated differences in the appearance of the colors ; for instance, the color difference was above 12.0 in most of the samples, including restoration color and acrylic gouache. In the case of Lemon Yellow a lot of discoloration and cracking occurred, and difference in gloss was ob served in Viridian of manufacturer C. Most cracks were ob served in the restoration color obtained from manufacturer B and were assumed to be because of the resin used by the manufacturer. Nevertheless, additional research will have to be conducted by controlling variables in order to find out the cause. Through this study, we demonstrated that retouching materials for conservation of oil painting differed in their physical properties according to the color and manufacturer. Therefore a conservator should be mindful during the selection and use of materials for retouching oil paintings.

• Journal of Korean Medicine Rehabilitation
• /
• v.31 no.4
• /
• pp.157-166
• /
• 2021

Objectives This study is designed to evaluate the safety of Bojungikgi-tang soft extract in healthy male volunteers. Methods 12 healthy male volunteers were recruited and this study was carried out by a single center. Laboratory test results, vital signs of the volunteers were collected to evaluate safety. According to registration order, the 12 subjects were allocated by serial number. To evaluate safety, blood samples were taken and vital signs were checked 4 times - screening, pre administration, post administration and follow up-during the whole trial. The difference between pre (before medication [0 hr]) and post-administration (after medication [48 hr]) variables was summarized as mean±standard deviation. The normality test was performed using the Kolmogorov-Smirnov test and Shapiro-Wilk test. When the normality is satisfied, the paired t-test is applied. Otherwise, the non-parametric method, Wilcoxon signed rank test is applied. The significance level was p<0.05. The incidence of all adverse effects are shown in percentage. Results In the case of red blood cell, hemoglobin, hematocrit, lymphocytes, neutrophils, protein, γ-glutamyl transpeptidase values, the normality test result of the variable for the difference value before and after the dosing has a significance level <0.05. But most of values did not deviate from the normal range, and the deviation from the normal range could not be regarded as the significance associated with this clinical trial. And adverse event wasn't observed associated with the clinical trial drug. Conclusions Bojungikgi-tang soft extract were considered to be safe for healthy male volunteers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.133-138
• /
• 2019

This study evaluated the tensile properties of SAPH440, a hot-rolled steel for automotive structural applications, based on GMAW lap welding, the welding current, the welding voltage, and the feed rate. Tensile tests were performed according to the joint parameters of the GMAW process, for which specimens were fabricated according to KS B ISO 9018 by lap welding. The bead appearance was observed in each condition, and the weldability was evaluated by the tensile test. Higher the welding current resulted in a deeper weld, but the tensile strength was not significantly different from when the parameter was fixed due to the fracture of the base material. When the current was higher than the voltage, as in the case of a welding current of 200 A and welding voltage of 17 V, a large amount of spatter is generated, the welding is unstable, and the welded part breaks. Higher the voltage resulted in the bead not causing defects in general, and it also affected the weldability. If the current and voltage were too low, the welding was not performed normally, and the tensile strength could not be measured. However, as the current increased, the increase of the voltage and the feed rate did not affect the tensile strength.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.4
• /
• pp.23-32
• /
• 2019

Increasing crop production with the same amount of resources is essential for enhancing the economy in agriculture. The first prerequisite is to understand relationships between the resources. The concept of WEF (Water-Energy-Food) nexus analysis was first introduced in 2011, which helps to interpret inter-linkages among the resources and stakeholders. The objective of this study was to analyze energy-water nexus in greenhouse cultivation by estimating reference evapotranspiration and heating load. For the estimation, this study used the physical model to simulate the inside temperature of the agricultural greenhouse using heating, solar radiation, ventilated and transferred heat losses as input variables. For estimating reference evapotranspiration and heating load, Penman-Monteith equation and seasonal heating load equation with HDH (Heating Degree-Hour) was applied. For calibration and validation of simulated inside temperature, used were hourly data observed from 2011 to 2012 in multi-span greenhouse. Results of the simulation were evaluated using $R^2$, MAE and RMSE, which showed 0.75, 2.22, 3.08 for calibration and 0.71, 2.39, 3.35 for validation respectively. When minimum setting temperature was $12^{\circ}C$ from 2013 to 2017, mean values of evapotranspiration and heating load were 687 mm/year and 2,147 GJ/year. For $18^{\circ}C$, Mean values of evapotranspiration and heating load were 707 mm/year and 5,616 GJ/year. From the estimation, the relationship between water and heat energy was estimated as 1.0~2.6 GJ/ton. Though additional calibrations with different types of greenhouses are necessary, the results of this study imply that they are applicable when evaluating resource relationship in the greenhouse cultivation complex.

• Journal of Digital Convergence
• /
• v.17 no.6
• /
• pp.145-157
• /
• 2019

This study is to look at the influential factors associated with the acceptance intention of smart farm and suggest a proposal for spreading adoption of smart farms. The research questionnaire distributed to the farmers were used for the research analysis by statistical program SPSS v22.0 and Process macro v3.0. The technical characteristics of smart farm, which are availability, reliability and economic efficiency were selected as independent variables to analyze the influential factors on acceptance intention of smart farm and the mediating effect of effort expectation was observed. As a result, availability and economic efficiency have a positive(+) influence on acceptance intention and reliability have no influence on acceptance intention. And availability, reliability and economic efficiency have a positive(+) influence on effort expectation. Effort expectation mediates the relationship between the technical characteristics of smart farm and acceptance intention. The results of the study are expected to be utilized at the seeking direction of policy for potential adopters of smart farm, the training and consulting in actual field of smart farm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.638-644
• /
• 2019

In this study, the fluid flow and heat transfer characteristics within sandwich panels are investigated using computational fluid dynamics. Within the sandwich panels having periodic cellular cores, air can freely move inside the core section so that the structure is able to perform multi-functional roles such as simultaneous load bearing and heat dissipation. Thus, there needs to examine the thermal and flow analysis with respect to design variables and various conditions. In this regard, ANSYS Fluent was utilized to explore the flow and heat transfer within the pyramidal truss sandwich structures by varying the truss angle and inlet velocity. Without the entry effect in the first unitcell, the constant rate of pressure and the constant rate of Nusselt number was observed. As a result, it was demonstrated that Nusselt number increases and friction factor decreases as the inlet velocity increases. Moreover, the rate of Nusselt number and friction factor was appreciable in the range of V=1-5m/s due to the transition from laminar to turbulent flow. Regarding the effect of design variable, the variation of truss angle did not significantly influence the characteristics.