• 수산해양기술연구
• /
• 제56권2호
• /
• pp.126-137
• /
• 2020

This study collected and analyzed the fishing process of existing fishing boat and newly built fishing boat by using the video observation methods to understand the improvement of fishing operation efficiency and safety according to the scale change of coastal composite fishing boat. The fishing operation efficiency was calculated by analyzing the frequency of movement, the movement distance and the moving time per basket used in the fishing process to derive the improvement of the newly built fishing boat compared to the existing fishing boat. It was confirmed that the mean frequency of movements decreased to 13.9%, the average moving time decreased to 21.8%, the mean movement distance increased to 20.5% and the movement through the top of gunwale did not occur. Movement of frequency, increased and time according to the fishing operation were directly affected by the width of side passages and the presence or absence of walking obstruction such as bulwark stay, hatch coaming and fishing gears on deck. The results of this study are expected to be used as basic data for redesigning into a safe and efficient coastal composite fishing boat in the future.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.647-655
• /
• 2003

This paper studies the observability of calibration system with a constraint movement by a constraint operator. The calibration system with the constraint movement need only simple sensing device to check whether the constraint movements are completed within an established range. However, it yields the concern about the poor parameter observability due to the constraint movements. This paper uses the QR-decomposition to find the optimal calibration configurations maximizing the linear independence of rows of a observation matrix. The number of identifiable parameters are examined by the rank of the observation matrix, which represents the parameter observability. The method is applied to a parallel typed machining center and the calibration results are presented. These results verify that the calibration system with low-cost indicators and simple planar table is accurate as well as reliable.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.194-198
• /
• 2005

Although the rainstorm causes local damage on large scale, it is difficult to predict the movement of the rainstorm exactly. In order to reduce the rainstorm damage of the rainstorm, it is necessary to analyze the path of the rainstorm using various statistical methods. In addition, efficient time interval of rainfall observation for the analysis of the rainstorm movement can be derived by applying various statistical methods to rainfall data. In this study, the rainstorm tracking using statistical method is performed for various types of rainfall data. For the tracking of the rainstorm, the methods of temporal distribution, inclined Plane equations, and cross correlation were applied for various types of data including electromagnetic rainfall gauge data and AWS data. The speed and direction of each method were compared with those of real rainfall movement. In addition, the effective time interval of rainfall observation for the analysis of the rainstorm movement was also investigated for the selected time intervals 10, 20, 30, 40, 50, and 60 minutes. As a result, the absolute relative errors of the method of inclined plane equations are smaller than those of other methods in case of electromagnetic rainfall gauges data. The absolute relative errors of the method of cross correlation are smaller than those of other methods in case of AWS data. The absolute relative errors of 30 minutes or less than 30 minutes are smaller than those of other time intervals.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.255-261
• /
• 2004

본 논문에서는 진해만에서 수질환경에 대한 현장관측조사를 통하여 진해만 수질현황에 대한 해수유동 시뮬레이션을 실시하여 대상해역의 유통특성을 파악하고, 계산된 유통data를 이용하여 해양오염시뮬레이션을 행하였으며 해수유동시뮬레이션 결과를 해양조사원에서 실시한 조석 및 조류관측 자료를 이용하여 시뮬레이션 결과를 검증하였으며, 유통결과를 해양오염 시뮬레이션의 유통 입력 자료로 이용하였다. 해수유통 Data 및 해양관측 Data를 이용하여 수질확산시뮬레이션을 행하여 실측데이터와 비교분석하여 COD농도 분포를 계산하여서 진해만의 수질특성을 파악하고자 하였다.

• 재활치료과학
• /
• 제12권1호
• /
• pp.23-35
• /
• 2023

목적 : 본 연구는 국내 감각통합치료의 임상 관찰 평가 사용실태와 세부 항목별 결과 측정의 어려움 및 중요도를 알아보고 이를 통해 임상 관찰 측정에 있어 AI 측정 기술의 적용 유용성과 세부 항목별 적용 필요도를 확인하고자 하였다. 연구 방법 : 연구 과정은 국내 작업치료사 31명에서 온라인 설문지 배포를 통해 조사 연구를 실시하였다. 설문지는 일반적 정보, 감각통합 평가 도구 사용 실태, 임상 관찰의 세부 항목별 측정의 어려움, AI 측정 기술의 유용성, 세부 항목별 평가의 중요성 및 AI 측정 기술 개발의 필요성을 조사하는 내용으로 구성되었다. 조사의 결과를 빈도분석과 기술통계를 사용하여 분석하였다. 결과 : 조사에 참여한 작업치료사들은 Sensory Profile(96.8%)을 가장 많이 사용하였고 그다음으로 임상 관찰(90.3%)을 많이 사용하였다. 임상 관찰 시 측정이 어려운 세부 항목은 Finger-to-nose Test와 Postural Control(on the 이었으며, 다음으로 Eye Movement와 Protective Extension Test(67.7%)였다. 임상 관찰 시 AI 측정 기술 적용은 83.9%의 연구 대상자들이 모두 유용할 것으로 응답하였다. AI 측정 기술 적용이 필요하다고 응답한 가장 높은 항목은 Postural Control(on the ball)(90.3%)이었고, 다음으로 Eye Movement(83.9%), Prone Extension과 Protective Extension Test(77.4%) 순으로 나타났다. 결론 : 본 연구의 결과는 국내 아동 작업치료 현장에서 임상 관찰이 중요한 평가도구이며 임상 관찰 평가의 측정 정확성을 향상하기 위해서 AI 기술 적용이 필요하다는 작업치료사들의 인식을 확인할 수 있었다.

• 한국컴퓨터정보학회논문지
• /
• 제22권1호
• /
• pp.1-7
• /
• 2017

In this paper, we propose an efficient method that is tracking an object in real time using particle filter and adaptive observation model. When tracking object, it happens object shape variation by camera or object movement in variety environments. The traditional method has an error of tracking from these variation, because it has fixed observation model about the selected object by the user in the initial frame. In order to overcome these problems, we propose a method that updates the observation model by calculating the similarity between the used observation model and the eight-way of edge model from the current position. If the similarity is higher than the threshold value, tracking the object using updated observation model to reset observation model. On the contrary to this, the algorithm which consists of a process is to maintain the used observation model. Finally, this paper demonstrates the performance of the stable tracking through comparison with the traditional method by using a number of experimental data.

• 한국해양공학회지
• /
• 제15권3호
• /
• pp.58-62
• /
• 2001

The objective of research is to clarify the interaction between dislocations and precipitates during high temperature creep deformation behaviors of high n austenitic steels. After measuring the internal stress in minimum creep rate state under applied stress of 236MPa at 873K, a transmission electron microscope (TEM) observation was performed to investigate the interaction between dislocations and precipitates during high temperature creep deformation. The band widths and values of internal stress increased when the nitride precipitates distribute more densely. Fine nitrides disturbed the dislocation movement with pinning the dislocations and perfect dislocations were separated into Shockley partial dislocations by fine nitrides. Coarse nitrides disturbed the dislocation movement with climb mechanism.

• 한국대기환경학회지
• /
• 제13권2호
• /
• pp.103-113
• /
• 1997

The research described in this paper was conducted to estimate the stability and heat budget in planetary boundary layer (PBL) at Kimhae. The upper air observation was carried out during period from 3 Februsry 1993 to 5 February 1993 at Kimhae. The surface observation data used the one during period from 1 April 1994 to 31 March 1995. The maximum height of inversion layer observed at Kimhae was 310 m. Destruction of the inversion was simultaneously occurred at the surface and the mid-layer (200 $\sim$ 300 m), however the origin of destruction is different each other. The surface inversion is destructed by surface heating owing to growing radiation in surface but disappearance of the mid-layer inversion is related to the upper cold air movement.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.332-337
• /
• 2001

The objective of research is to clarify the interaction between dislocations and precipitates during high temperature creep deformation behaviors of high Mn austenitic steels. After measuring the internal stress in minimum creep rate at 873K, a transmission electron microscope (TEM) observation was performed to investigate the interaction between dislocations and precipitates during high temperature creep deformation. The band width of effective stress and internal stress increased when the nitride precipitates distribute more densely. Fine nitrides disturbed the dislocation movement with pinning the dislocations and perfect dislocations were separated into Shockley partial dislocations by fine nitrides. Coarse nitrides disturbed the dislocation movement with climb mechanism.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제7권1호
• /
• pp.58-65
• /
• 2007

Behavioral sequences of the medaka (Oryzias latipes) were continuously investigated through an automatic image recognition system in response to medaka treated with the insecticide and medaka not treated with the insecticide, diazinon (0.1 mg/l) during a 1 hour period. The observation of behavior through the movement tracking program showed many patterns of the medaka. After much observation, behavioral patterns were divided into four basic patterns: active-smooth, active-shaking, inactive-smooth, and inactive-shaking. The "smooth" and "shaking" patterns were shown as normal movement behavior. However, the "shaking" pattern was more frequently observed than the "smooth" pattern in medaka specimens that were treated with insecticide. Each pattern was classified using classification methods after the feature choice. It provides a natural way to incorporate prior knowledge from human experts in fish behavior and contains the information in a logical expression tree. The main focus of this study was. to determine whether the decision tree could be useful for interpreting and classifying behavior patterns of the medaka.