• Journal of Korean Neurosurgical Society
• /
• v.66 no.6
• /
• pp.703-715
• /
• 2023

Objective : This retrospective study investigated the factors that affect cage obliquity angle despite orthogonal maneuvers performed during oblique lateral interbody fusion (OLIF) and assessed the relationship between cage obliquity angle and radiological outcomes post-surgery. Methods : Twenty-nine males who underwent L4-L5 OLIF for lumbar degenerative disease between 2019 and 2021 with a followup duration greater than 12 months were analyzed. Radiological parameters were measured including psoas muscle volume, total psoas area index (total psoas muscle area [cm²]/height squared [m²]), distance from the iliac artery to the origin of the psoas muscle (DIAPM), angle between the origin of the psoas muscle and the center of the vertebral disc (APCVD), iliac crest height, disc height, lumbar flexibility (lumbar flexion angle minus extension angle), cage location ratio, cage-induced segmental lumbar lordosis (LL) (postoperative index level segmental LL minus used cage angle), foraminal height changes, fusion grade. Results : DIAPM, APCVD, iliac crest height, postoperative index level segmental LL, and cage-induced segmental LL were significantly correlated with OLIF cage obliquity angle. However, other radiological parameters did not correlate with cage obliquity. Based on multiple regression analysis, the predictive equation for the OLIF cage obliquity angle was 13.062-0.318×DIAPM+0.325×1APCVD+0.174×iliac crest height. The greater the cage obliquity, the smaller the segmental LL compared to the cage angle used. Conclusion : At the L4-L5 level, OLIF cage obliquity was affected by DIAPM, APCVD, and iliac crest height, and as the cage obliquity angle increases, LL agnle achievable by the used cage could not be obtained.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.3
• /
• pp.293-301
• /
• 2010

The purpose of this study was to investigate the kinematic difference between skilled and less skilled group for the forward walk at dance sports rumba. Six female players(skilled group: 3, less skilled group: 3) were participated as the subjects. To obtain the three-dimensional location coordinates in the joints and segments, it shot with 100Hz/s using 8 video cameras. Step length, shoulder rotation angle, orientation angle and angular velocity of pelvis were analyzed for each trail. The skilled group showed a bigger movement than the less skilled group at the shoulder rotation angle and ROM. The skilled group showed a bigger movement than the less skilled group at the up/down obliquity and internal/external rotation movement for pelvis. And the skilled group showed a bigger movement than the less skilled group at Maximum angle (down obliquity) of P2 and Maximum angle (up obliquity) of P3 to pelvis ROM. The skilled group showed a faster angular velocity than the less skilled group at P2 (+ direction, posterior) of anterior & posterior tilt, P2 & P3 (- direction, up) of up & down obliquity, and P2 (+ direction, external) of internal & external rotation.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.4
• /
• pp.339-345
• /
• 2014

PURPOSE: This study is to investigate the effect of 4 weeks of gym ball exercise on the pelvis and spine of women in 20s. METHODS: Randomly selected 10 of 20 subjects are allocated to experimental group who will practice gym-ball exercise while the rest 10 subjects are allocated to control group. Values for pelvic obliquity DL-DR, pelvic torsion DL-DR, pelvic rotation, kyphotic angle ICT-ITL (max), and lordotic angle ITL-ILS (max) were measured through recording using 3-dimensional image analyzer as a preliminary inspection. Gym-ball exercise was implemented 3 sessions a week for 4 weeks. Each session consisted of 10 minutes of warm up exercise, 30 minutes of main exercise, and 10 minutes of cool down exercise totaling 50 minutes. Post inspections were measured after exercise. RESULTS: Experimental group showed statistically significant difference in pelvic obliquity DL-DR, pelvic torsion DL-DR, and kyphotic angle ICT-ITL (max) (p<.05) and values of pelvic obliquity DL-DR showed statistically significant difference between two groups (p<.05). However pelvic rotation, lordotic angle ITL-ILS (max) did not show a significant difference. CONCLUSION: These results showed that gym-ball exercise has positive effect in the pelvic obliquity, torsion and spine kyphotic angle and expected to have positive effect on the body balance, body lineup, and coordination.

• Journal of Korean Medicine Rehabilitation
• /
• v.21 no.2
• /
• pp.309-318
• /
• 2011

Objectives : To evaluate the effect of foot orthotic in patient with chronic pain and pelvic obliquity in standing. Methods : Four cases of functional spinal scoliosis, were investigated for the changes in the calcaneal stance position angle, pelvic height, pelvic angle, Cobb's angle and walking pattern. Standing full spine X-ray for measuring the pelvic height, pelvic angle, Cobb's angle were checked before and after application of foot orthosis. The foot orthosis was composed of polyprophylen and chamude cover. Results : 1. There was no change in resting calcaneal stance position. 2. Difference of pelvic height and pelvic angle was reduced after application of a foot orthosis. 3. Cobb's angle in 2 cases was reduced after application of a foot orthosis. 4. Walking balance was improved. 5. Visual analogue scale was decreased. Conclusions : The study showed that foot orthosis seemed to be effective for chronic pain, spinal curve, pelvic obliquity and walking balance.

• Journal of Korean Foot and Ankle Society
• /
• v.11 no.2
• /
• pp.141-144
• /
• 2007

Purpose: To statistically evaluate the contributing role of the 3 radiographic factors (Obliquity, Asymmetry, Joint deviation) of the hallux valgus interphalangeus with comparison to the normal control group. Materials and Methods: The study is based on the standing foot AP radiographs of the 77 feet (56 patients) of the hallux valgus interphalangeus out of 119 feet of randomly sampled patients of the age range 20 to 60. Fractures or other foot disorders have been excluded. Obliquity, asymmetry and joint deviation factors formed by proximal and distal phalanges of hallux are measured by one observer and evaluated the statistical significance of the contribution of the 3 factors to the hallux interphalangeal angle (HIA). Results: The average age of the patients were 36.0 years old and average HIA was $14.5^{\circ}{\pm}2.8^{\circ}$. Obliquity was measured $4.8^{\circ}{\pm}2.90^{\circ}$, asymmetry $8.2^{\circ}{\pm}3.28^{\circ}$ and joint deviation $2.0^{\circ}{\pm}1.85^{\circ}$. All 3 factors showed the statistical significance as the contributing factors to the HIA and among them, the asymmetry played the biggest role (p<0.05). Conclusion: Hallux interphalangeal angle is formed by 3 radiographic factors (Obliquity, Asymmetry, Joint deviation), and among them the asymmetry factor plays the biggest role.

• Journal of Korean Physical Therapy Science
• /
• v.12 no.4
• /
• pp.57-67
• /
• 2005

The purpose of this study is to investigate the effect of low back pain(LBP) and pelvic displacement on foot orthosis. Before and after experiments were designed to compare the effect. 21 LBP patients who were the subjects diagnosed of applying foot orthosis for 3 weeks after, investigated about pelvic obliquity angle, displacement of ilium, lumbo-sacral angle by x-ray test which is one of pelvic displacement tests, visual analogue scale is used for LBP measurement. The result show the followings; First, Pelvic obliquity angle was significantly reduced after applying foot orthosis compared before using it(p<.05). Second, Displacement of ilium was significantly reduced after applying foot orthosis compared before using it(p<.05). Third, Lumbo-sacral angle was significantly reduced after applying foot orthosis compared before using it(p<.05). Fourth, LBP was significantly reduced after applying foot orthosis compared before using it(p<.05). This study tries to suggest new LBP treatment to reduce pelvic displacement by apply foot orthosis. In conclusion, foot orthosis reduces pelvic obliquity angle, displacement of ilium, lumbo-sacral angle and also decrease LBP. Further more, It needs of biomechanical study which can recognize relation between foot arch and pelvic displacement. This study will serve as a clinically useful data for diagnosis and treatment of LBP and biomechanical analysis of lower limb.

• The Journal of Korean Physical Therapy
• /
• v.31 no.6
• /
• pp.368-371
• /
• 2019

Purpose: The purpose of this study was to investigate the effects of leg length discrepancy on kinematic changes of the pelvis and hip during gait. Methods: A total of ten healthy women with no history of neurological, musculoskeletal surgery or injuries, or pain in the lower limbs were recruited. They were assigned to two groups; the experimental group (LLD) consisting of five subjects leg length discrepancy of 10mm to 18mm and the control group (CON) consisting of five subjects leg length discrepancy of<10 mm. All participants were instructed to perform three walking trials for further analysis by using the Cortex 3.0 software program. Independent T-test and Mann-Whitney test were used to examine the effects of mild LLD on kinematic changes of the pelvis and hip during gait. Results: Angles of hip flexion, hip abduction, pelvic obliquity, and pelvic tilt in the experimental group were not significantly different compared to those of the control group. Conclusion: Mild leg length discrepancy induces kinematic changes in the lower limbs, including decreased hip flexion, increased hip abduction, and increased pelvic obliquity in the shorter limb, and increased hip adduction and increased pelvic obliquity in the longer limb. However, those changes were not significant.

• The Journal of Korean Society for Radiation Therapy
• /
• v.7 no.1
• /
• pp.125-132
• /
• 1995

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.9 no.1
• /
• pp.41-47
• /
• 2010

Purpose: To compare the obliquity of femoral tunnels prepared with transtibial (TT) versus anteromedial portal technique (AM) using x-ray in single-bundle anterior cruciate ligament (ACL) reconstruction. Materials and Methods: Among one-hundred thirty two patients who were undergoing ACL reconstruction from January 2007 to December 2009, thirty patients using TT and twenty patients using AM, those who had single-bundle ACL reconstruction, were evaluated with plain radiographs including anteroposterior, intercondylar notch and lateral view to compare the obliquity of bone tunnels. Results: The mean coronal obliquity of femoral tunnel for TT was $71^{\circ}$ (range; $65^{\circ}{\sim}77^{\circ}$), while for AM was $51^{\circ}$ (range; $39^{\circ}{\sim}60^{\circ}$) and the mean sagittal obliquity of femoral tunnel for TT was $22.7^{\circ}{\pm}7.8$, while for AM was $30.2^{\circ}{\pm}6.9$, their differences between them were statistically significant (P<0.05). However, there were no differences between two techniques on the tibial tunnel obliquity in coronal and sagittal plane. Conclusion: Anterior cruciate ligament reconstruction using AM portal technique allows more horizontally oriented and divergent femoral tunnel compared to that of transtibial technique. This seems to enable the graft placement into the femoral footprint and preserve the posterior cortical wall.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.267-272
• /
• 2003

In order to investigate the effect of face material on Ti/Al alloy laminates under high velocity impact, a ballistic testing was conducted. Ballistic resistance of these materials was measured by protection ballistic limit($V_{50}$), a statistical velocity with 50% probability penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, were respectfully observed, by $V_{50}$ test and Projectile Through Plates (PTP) test at velocities greater than $V_{50}$. PTP tests were conducted with $0^{\circ}$obliquity at room temperature using 5.56mm ball projectile. $V_{50}$ tests with $0^{\circ}$obliquity were also done with projectiles that were able to achieve near or complete penetration during PTP tests. Resistance to penetration, and penetration modes which face material was Titanium alloy, were compared to those which face material was anodized Al alloy after cold-rolling.