• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1217-1223
• /
• 2007

Advanced microwave absorbers for wide oblique incidence angles are required in many applications including wireless communication or vehicle identification in ITS(Intelligent Transport System) where 5.8 GHz DSRC(Dedicated Short Range Communication) system is applied. In this study, two-layered microwave absorber(with a laminate structure of dielectric/magnetic composites) has been designed for the achievement of low reflection coefficient over wide incidence angles at 5.8 GHz. Iron flake particles are used as the filler in the absorbing layer, and the magnetic composite sheet exhibits high magnetic loss due to ferromagnetic resonance in gigahertz frequencies. The surface layer of low dielectric constant containing small amount of carbon black is used as the impedance transformer. On the basis of transmission line theory, the reflection loss has been calculated for the two-layer structure with variation of incident angles for both TE(Transverse Electric) and TM(Transverse Magnetic) polarizations. At the optimum thickness of the composite layers, a low value of reflection loss(less than -10 dB) has been predicted for wide incidence angles up to $55^{\circ}$ which is in good agreement with the measured value determined by free-space measurement.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.5
• /
• pp.1277-1288
• /
• 1997

In this paper,the extraciton method for individual and the recognition method for the printed dociments are discussed. In preprocessing is a technique to extract characters that are difficult to manage such as touching characters or overlapped chracters.Genrally in the existing segmentation methods,projection and edge detection are applied.However,in this paper an indvidual character is extracted by using connected pixel with one projection after the string extraction The maximum Blok Methld(MBM)is used for the recognition.The MBM is a method to enlarge the block to the last point the pixel that was found during projection. The maximum blocks are skeletonxied after the division into straight line block and oblique line block.Especially,in the recognition of chinese chracters compared to the existing method it showed improved recognition rate.

• Imaging Science in Dentistry
• /
• v.48 no.4
• /
• pp.255-259
• /
• 2018

Purpose: This study proposes a new ball-type phantom for evaluation of the image layer of panoramic radiography. Materials and Methods: The arch shape of an acrylic resin phantom was derived from average data on the lower dental arch in Korean adult males. Metal balls with a 2-mm diameter were placed along the center line of the phantom at a 4-mm mesiodistal interval. Additional metal balls were placed along the 22 arch-shaped lines that ran parallel to the center line at 2-mm buccolingual intervals. The height of each ball in the horizontal plane was spaced by 2.5 mm, and consequently, the balls appeared oblique when viewed from the side. The resulting phantom was named the Panorama phantom. The distortion rate of the balls in the acquired image was measured by automatically calculating the difference between the vertical and horizontal length using $MATLAB^{(R)}$. Image layer boundaries were obtained by applying various distortion rate thresholds. Results: Most areas containing metal balls (91.5%) were included in the image layer with a 50% distortion rate threshold. When a 5% distortion rate threshold was applied, the image layer was formed with a small buccolingual width along the arch-shaped center line. However, it was medially located in the temporomandibular joint region. Conclusion: The Panorama phantom could be used to evaluate the image layer of panoramic radiography, including all mesiodistal areas with large buccolingual width.

• Journal of Radiation Protection and Research
• /
• v.28 no.3
• /
• pp.225-231
• /
• 2003

Up-front irradiation technique as 3-dimensional conformation, or intensity modulation has kept large proportion of brain tumors from being complicated with acute radiation reactions in the normal tissue during or shortly after radiotherapy. For years, we've cannot help but counting on 2-D vertex beam technique to reduce acute reactions in the brain tumor patients because we're not equipped with 3-dimensional planning system. We analyzed its advantages and limitations in the clinical application. From 1998 to 2001, vertex or oblique vertex beams were applied to 35 patients with primary brain tumor and 25 among them were eligible for this analysis. Vertex(V) plans were optimized on the reconstructed coronal planes. As the control, we took the bilateral opposed techniques(BL) otherwise being applied. We compared the volumes included in 105% to 50% isodose lines of each plan. We also measured the radiation dose at various extracranial sites with TLD. With vertex techniques, we reduced the irradiated volumes of contralateral hemisphere and prevented middle ear effusion at contralateral side. But the low dose volume increased outside 100%; the ratio of V to BL in irradiated volume included in 100%, 80%, 50% was 0.55+/-0.10, 0.61+/-0.10, and 1.22+/-0.21, respectively. The hot area within 100% isodose line almost disappeared with vertex plan; the ratio of V to BL in irradiated volume included in 103%, 105%, 108% was 0.14+/-0.14, 0.05./-0.17, 0.00, respectively. The dose distribution within 100% isodose line became more homogeneous; the ratio of volume included in 103% and 105% to 100% was 0.62+/-0.14 and 0.26+/-0.16 in BL whereas was 0.16+/-0.16 and 0.02+/-0.04 in V. With the vertex techniques, extracranial dose increased up to $1{\sim}3%$ of maximum dose in the head and neck region except submandibular area where dose ranged 1 to 21%. From this data, vertex beam technique was quite effective in reduction of unnecessary irradiation to the contralateral hemispheres, integral dose, obtaining dose homogeneity in the clinical target. But it was associated with volume increment of low dose area in the brain and irradiation toward the head and neck region otherwise being not irradiated at all. Thus, this 2-D vertex technique can be a useful quasi-conformal method before getting 3-D apparatus.

• Korean Journal of Cognitive Science
• /
• v.11 no.2
• /
• pp.37-51
• /
• 2000

The present study compared computer users target-selection response patterns when the targets were varied in terms of their relative location and distance from the current position of the cursor. In Experiment 1, where the mouse was used as an input device, the effects of different directions and distances of simple target(small rectangle) on target-selection response were investigated. The results of Experiment 1 can be summarized as follows: (1) Overshooting was more frequent than either undershooting or correct movement and (2) this tendency was more prominent when the targets were presented in the oblique direction or in farther location from the current cursor position. (3) Although the overshooting and undershooting were more frequent in the oblique direction, the degree of deviation was larger in horizontal and vertical direction. (4) Time spent in moving the mouse rather than that spent in planning, calibrating or clicking was found to be the most critical factor in determining total response time. In Experiment 2, effects of the font size and line-height of the target on target-selection response were compared with regard to two types of input devices(keyboard vs. mouse). The results are as follows: (1) Mouse generally yielded shorter target-selection time than keyboard. but this tendency was reversed when the targets were presented in horizontal and vertical directions. (2) In general, target-selection time was the longest in the condition of font size of 10 and line-height of 100%, and the shortest in the condition of font size of 12 and line-height of 150%. (3) When keyboard was used as the input device, target-selection time was shortest in the 150% line-height condition, whereas in the mouse condition, target-selection time tended to be increased as the line-height increased. which resulted in the significant interaction effect between input device and line-height. Finally, several issues relating to human-computer interaction were discussed based on the results of the present study.

• The Research Journal of the Costume Culture
• /
• v.8 no.6
• /
• pp.915-929
• /
• 2000

As a result of research, the character of the general dress-costumes from the late 17th century to the early 18th century in Genre Paintings of DuSeo Yun and YoungSeok Cho is as follows. Firstly young women wore braided hair at the back of head and married women wore hair in the style of Unjeun-mori with Gache. The length of Jeogori (Korean traditional jacket) covered waistor shortened to waist length. The width of Jeongori was suitable, because side-seam line was straight or oblique as it comes into inner line. The width of Git was enough and Mokpan-git (shape of board) and Kal-kit (shape of knife) appeared, and sometimes used other color fabric. Sleeve was narrow and ostly folded up. Chima (Korean traditional skirt) used darker color fabric than Jeogori and the width of Chima was narrow and its length was short. Sokbaji (Korean traditional underpants) shown below were narrow and its end narrower. They were barefoot or they wore Hye (Korean traditional shoes) after putting on Beoseon (Korean traditional socks). Secondly general man's hair tie a topknot (sangtu) and put on headdres, 'Bang-lip', 'Mang-geon', hairband, 'Tang-geon' on head. The length of Jeogori became shorter from the line which covered hip to the line which covered waist. The width of Jeogori was suitable and sometimes it had a slit of side-seam line. The width of Git (neckand) was wide and the length of Git was long. 'Kal-git'appeared and it used other color fabric. The shape of sleeve was straight and narrow. They folded up their sleeves. They folded up their sleeves. They folded up their slack that look like 'Jam-bang-i'and the width of slacks was not suitable, and it was narrow. Baji (Korean traditional pants) were with or without knot, worn 'Hangjeon'(ankle band). They were barefoot and wore 'Hye'or 'Jipsin'(Korean traditional straw shoes). Thirdly a person of high birth or a low-ranked official put 'Yu-geon', 'Mang-geon', 'Gat', 'Tang-geon', 'Bok-du', 'Bok-geon', 'Whi-hang'on their head on a topknot. They wore 'Po (Shim-ui, Jick-ryeong'Jung-chi-mak, Do-po, etc)'on Baji and Jeogori. 'Po'was long and wide, it knot with 'Se-jo-dae'(string belt) or 'Po-baek-dae'(band belt). It had a slit of sideline and 'Mu'which had or had not or which were hard to confirm. The shape of sleeve was straight or very wide and its length was long. The width of Baji was wide and knotted with 'Hangjeon'and wore'Beoseon'and 'Hye'. Fourthly child's hair was short or knotted to the back of the head. The length of Jeogori reached waist line and its width was wide. It had a 'Jeogori'which had s slit of sideline. The shape of sleeve was 'Tong-su'(straight), and the length of sleeve was diverse. They put 'Baeja'on 'Jeogori'. The width of Baji was not wide. They wore them straight without or with knot, 'Hangjeon'. They were barefoot or put on 'Jipsin'.

• Journal of Mechanical Science and Technology
• /
• v.18 no.8
• /
• pp.1435-1450
• /
• 2004

Experimental data are presented which describe the effects of a combustor-level high free-stream turbulence on the near-wall flow structure and heat/mass transfer on the endwall of a linear high-turning turbine rotor cascade. The end wall flow structure is visualized by employing the partial- and total-coverage oil-film technique, and heat/mass transfer rate is measured by the naphthalene sublimation method. A turbulence generator is designed to provide a highly-turbulent flow which has free-stream turbulence intensity and integral length scale of 14.7% and 80mm, respectively, at the cascade entrance. The surface flow visualizations show that the high free-stream turbulence has little effect on the attachment line, but alters the separation line noticeably. Under high free-stream turbulence, the incoming near-wall flow upstream of the adjacent separation lines collides more obliquely with the suction surface. A weaker lift-up force arising from this more oblique collision results in the narrower suction-side corner vortex area in the high turbulence case. The high free-stream turbulence enhances the heat/mass transfer in the central area of the turbine passage, but only a slight augmentation is found in the end wall regions adjacent to the leading and trailing edges. Therefore, the high free-stream turbulence makes the end wall heat load more uniform. It is also observed that the heat/mass transfers along the locus of the pressure-side leg of the leading-edge horseshoe vortex and along the suction-side corner are influenced most strongly by the high free-stream turbulence. In this study, the end wall surface is classified into seven different regions based on the local heat/mass transfer distribution, and the effects of the high free-stream turbulence on the local heat/mass transfer in each region are discussed in detail.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.141-144
• /
• 1997

Femoral neck anteversion is the angle between the neck and the knee axis projected on a plane perpendicular to the longitudinal axis. Conventional methods that use cross-sectional Computed Tomography(CT) images to estimate femoral anteversion have several problems because of the complex 3D structure of the femur. These are the ambiguity of defining the longitudinal axis, the femoral neck axis and condylar line, and the dependence on patient positioning. Especially the femoral neck axis that is known as a major source of error is hard to determine from a single or multiple 2D transverse images. So we developed a new method for measuring femoral anteversion by 3D modeling method. In this method, femoral head is modeled as a sphere. The center of femoral neck is the mid-point of the 2D reconstructed oblique image in the femoral neck part. Then neck axis is a line connecting foregoing two centers. We model the longitude of femur as a cylinder, and the long axis is defined from the fitted cylinder. The knee axis which is tangent to the back of the femoral condyles is easily determined by table-top method. By the definition of femoral anteversion, the femoral anteversion is easily calculated from this model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.10
• /
• pp.1159-1165
• /
• 2008

In this paper, a single-feed equilateral-triangular microstrip antenna with truncated corners is used for achieving diverse radiation polarization. The proposed antenna is excited by a microstrip line, which is place parallel to an oblique side of the equilateral-triangular patch. Depending on whether the three identically-sized comers of the triangular patch are cut or not, the equilateral-triangular microstrip antenna shows linear polarization(LP) or left-hand circular polarization(LHCP) or Tight-hand circular polarization(RHCP). Based on the equilateral-triangular microstrip antenna with truncated corners, a novel reconfigurable microstrip antenna with switchable polarization sense is also proposed. The proposed reconfigurable antenna has a simple structure, consisting of a corner-truncated triangular patch, a small triangular conductor, and a microstrip line. Using a biased PIN diode between the patch and the small triangular conductor, it can produce LP or RHCP according to bias voltages. From the measured results, low cross polarization level when operated in the linear state and good axial ratio in the circular state are observed.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.3
• /
• pp.111-122
• /
• 2014

Partitioning interwell tracer test (PITT) is a method to quantify and qualify a site contaminated with NAPLs (Non-Aqueous Phase Liquids). Analytical description of PITT assumes that the injection-pumping well pair is on the line of the ambient groundwater flow direction, but the test-well pair could frequently be off the line in a real field site, which could be an erroneous factor in analyzing PITT data. The purpose of this work is to study the influence of the angle of the test-well pair on the ambient groundwater flow direction based on the result from PITT. From the experiments, it was found that the obliqueness of the test-well pair to the ambient groundwater flow direction could affect the tracer test resulting in a decreased NAPL estimation efficiency. In case of an oblique arrangement of the test-well pair to the ambient flow direction, it was found that the injection of a chase fluid could enhance the estimation efficiency. An increase of the pumping rate could enhance the recovery rate but it cannot be said that a high pumping rate can increase the test efficiency because a high pumping rate cannot give partitioning tracers enough time to partition into NAPLs. The results have a implication that because the arrangement of the test-well pair is a controlling factor in performing and interpreting PITT in the field in addition to the known factors such as heterogeneity and the source zone architecture, flow direction should be seriously considered in arranging test-well pair.