• Archives of Orthopedic and Sports Physical Therapy
• /
• v.14 no.2
• /
• pp.45-53
• /
• 2018

Purpose: The purpose of this study was to investigate the effects of muscle activity and muscle strength according to verbal command volume during isokinetic and isometric quadricep exercises. Methods: To measure muscle activity and muscle strength, surface electrodes were attached to the participants, as they sat on a Biodex chair. The isometric exercise was performed three times, with maximum exercise at $30^{\circ}$ bending angle, based on a maximum extension state of the knee at $0^{\circ}$. The average holding time was unified to three seconds. In addition, the isokinetic exercise was performed three times, at $60^{\circ}/sec$. The verbal command ranged between 0∾60 dB and 0∾75 dB. Muscle activity was measured using surface electromyography (4D-MT, Relive, Gimhae, Korea). The Biodex System 4 was used to measure the isometric and isokinetic strength of the nodal line, and 4D-MT was used to measure muscle activity. Results: There were significant improvements in the maximal and relative muscle strengths, when the 0∾ 60 dB and 0∾75 dB verbal commands were applied with isokinetic extension/flexion (p<.05). The isokinetic exercise (0∾75 dB) group showed a significant difference in the vastus medialis oblique muscle activity change (p<.05), while the isometric exercise (0∾75 dB) group showed a significant difference in the rectus femoris muscle activity change (p<.05). Conclusions: Our results reveal that verbal commands effectively improve muscle activity and muscle strength during isokinetic and isometric quadricep exercises.

• Radiation Oncology Journal
• /
• v.22 no.1
• /
• pp.69-75
• /
• 2004

Purpose : A new fiduciary plate and orientation marker have been devised to assist the quality assurance (QA) procedures for port films in radiation therapy department. The plate is used in conjunction with the film/cassette combination during weekly QA procedures, at Seoul National University Hospital (SNUH), in order to verify treatment fields in high radiation therapy. Materials and Methods : A new fiduciary plate was fabricated using an acrylic plate, cerrobend, standard blocking tray and mercury. The acrylic plate had the dimension of $1{\times}25{\times}25$ cm, with two fiduciary markers. The plate was rigidly attached onto the standard blocking tray, thus making it easier to set the fiduciary plate to the center on the radiation field on the linear accelerator. The plate had two 2-mm vertical and horizontal lines, with the minor scales in 2-cm steps. The orientation marker was a small mercury filled disk, which was inserted into the plate. Results : The geometrical structure of the lines in the plate makes it easier to correlate two different images between the simulation and port films. The marker clearly indicated the orientation of the film, for example, the anterior, posterior, left, right and various oblique orientations, without the placement of a conventional orientation marker. Also, the new orientation marker could easily be applied to the simulator by placing the small orientation marker onto the image intensifier or in front of the film/cassette holder. Conclusions : The new fiduciary plate appears to be useful in verifying the treatment fields, and the new orientation marker makes the film orientation simple, which is expected to lower the block fabrication errors.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.408-414
• /
• 2011

Purpose: To correct breast ptosis, reduction mammoplasty and mastopexy have been developed in a way that minimizes complications. Recently, as the mean age of breast cancer occurrence is decreasing, the need for breast reconstruction in patients with breast cancer is rising. If mastopexy is performed with breast reconstruction at the same time, the size of the normal breast and the new one is not quite different. We decided to apply Z-plasty, which is a widely-used technique in plastic surgery to lengthen or change the direction of tension of the tissue. Methods: From March 2008 to December 2009, we performed breast reconstruction in 6 patients with breast cancer and scar contracture. After breast reconstruction, mastopexy with Z-plasty was applied to correct the asymmetry. The new nipple-areolar complex is placed on the line connecting the midclavicle and the current nipple. The inferior border of the new areola corresponds with the inferior border of the original areola, and the superior border about 2 cm upward the original superior border. We drew two oblique lines connecting the medial end of the incision line lower to the nipple-areola complex and the lateral end of the inframammary fold for Z-plasty. The excess tissue between these two lines was removed and the new triangular flaps were put together. Results: The average age of patients was 42.6 years, aged from 36.1 to 48.1 The weight of removed tissue was between 54g and 95 g, with the mean of 74 g. The average distance from the midclavicle to the nipple was 24 cm before surgery, and 21 cm after the surgery. The average operation time per patient (1 mastopexy) was 45 minutes, and the patients were satisfied with the size and shape. Conclusion: Applying Z-plasty for the mastopexy on the normal breast ptosis is a relatively simple way to achieve symmetry in patients who need breast reconstruction.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.1
• /
• pp.17-25
• /
• 2020

The purpose of this study was to examine the effects of coordinative locomotor training (CLT) program on the balance for the promotion of life care of elderly obese women. Ten participants of elderly obese women who were able to walk independently without surgery experience of lumbar, hip or knee joint within the past year were recruited and under went the pretest, CLT (20 sessions), followed by the post-test. The test included BMI test using In-body, joint kinematics using myoVIDEO, muscle activation using surface EMG test (erector spinae (ER), external oblique abdominalis (EO), quadriceps femoris (Quad), hamstring muscle (Ham)) and balance tests including dynamic balance test using forced treadmill, Berg balance scale (BBS) and timed up go (TUG). The CLT program was conducted 60 minutes a day, 5 days a week, over 4 weeks period. As a result of this study, The the trunk and hip joints kinematics during the stance and swing phases of gait were a statistical significance levels were set at p <0.05. The ER and EO muscle activation were significantly improved after intervention (p <0.05). The length of gait line and single support line of change of center of pressure (COP) were significantly increased after intervention (p <0.05). The BBS and TUG were also significantly enhanced after intervention (p <0.05). The results of this study showed that CLT program for the improvement of life care had significant effects on improving postural instability, muscle weakness, reduced balance ability and falling risk of obese elderly women. Therefore, it is recommended to apply CLT program to improve life-care through improving balance ability and preventing fall of obese elderly women.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.235-258
• /
• 2022

We interpreted the evolutionary history of the southwestern part of the Pohang Basin, the largest Miocene basin in the southeastern part of the Korean Peninsula, based on the detailed geological mapping and analysis of the geological structures. The southwestern part of the Pohang Basin can be divided into the Bomun Domain in the west and Ocheon Domain in the east by an NNE-trending horst-in-graben. These two domains have different geometries and deformation histories. The Bomun Domain was rarely deformed after the incipient extension of the basin, whereas the Ocheon Domain is an area where continued and overlapped deformations occurred after the basin fill deposition. Therefore, the Bomun Domain provides critical information on the initial extension mode of the Pohang Basin. The subsidence of the Bomun Domain was led by the zigzag-shaped western border fault that consists of NNE-striking normal and NNW-striking dextral strike-slip fault segments. This border fault is connected to the Yeonil Tectonic Line (YTL), a regional dextral principal displacement zone and the westernmost limit of Miocene crustal deformation in SE Korea. Therefore, it is interpreted that the Pohang Basin was initially extended in WNW-ESE direction as a transtensional fault-termination basin resulting from the movement of NNE-striking normal and/or oblique-slip faults formed as right-stepover in the northern termination of the YTL activated since approximately 17-16.5 Ma. As a result, an NNE-trending asymmetric graben or half-graben exhibiting an westward deepening of basin depth was formed in the Bomun Domain. Afterward, crustal extension and deformation were migrated to the east, including the Ocheon Domain.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.297-310
• /
• 1998

The purpose of this study was to investigate the initial tissue change, to repair on the teeth & surrounding tissue under the intrusive orthodontic forces by use of elastic chain, through the microscopic findings. For this study, three young adult mongrel dogs were used, and were divied into three group : the control group was deliveried only casting crown and the experimental group 1 was equipped with energy chain during 1 week and experimental 2 group was deliveried using energy chain during 1 week and 3 weeks observation. All experimental groups and control groups were sacrificed to make the samples for microscopic findings on premolar teeth. All samples were examed and compared the histologic changes through the microscopic with H-E stain. The obtained results were as follows. 1. In hematoxylin-eosin stain of the control group, the periodontal ligament was constant width from apical third to cervical third of the root, and the periodontal fiber arrangement was horizontal or oblique in cervical third, oblique in middle and apical third of the root. 2. In Masson Trichrome stain of the control group, osteoblast and osteoclast appeared in cervical third of root, and bone resorption and new bone formation was observed in middle and apical third of the root. 3. In experimental 1, osteoclasts were increased highly, and hyperemia of blood vessels and new bone formation and bone resorption by reversal line in apical third of the root were seen. PDL width was increased apprarently from crest to apex of the root and more in apical third. 4. In experimental 2, osteoclasts and hyperemia of blood vessels were more increased than control material in apical third of the root. PDL width was increased more than control group in root apex, and was seen less than experimental 1. PDL arrangement was similar to experimental 1 and was mixed only in root apex. Therefore, in premolar intrusion of the young adult dog, there were increased osteoclast, hyperemia and dilation of blood vessel, resorption of alveolar bone and cementum and different arrangement of PDL in initial tissue change. There was not observed complete repair after remove intrusive force.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.104-121
• /
• 2017

The present study attempted to produce the floor plan of the surroundings near Geumcheongyo Bridge in Changdeokgung Palace of the Late Joseon Period through the use of rubber sheeting transformation based on the drawing principles of "Donggwoldo(東闕圖)". First, the study compared the actual sizes of the major buildings that have existed since the production of "Donggwoldo(東闕圖)" with the sizes depicted in the picture to reveal that the front elevation of the buildings was produced by reducing it by approximately 1/200. However, the study could not confirm the same production proportions for the side elevation. Only the lengths of the side elevation were depicted at around half of the actual proportions, and as the diagonal line angles were found to be at an average of $39^{\circ}$, the study confirmed they were drawn in a manner similar to cabinet projection. Second, the study created an obliquely projected floor plan by inversely shadowing the drawing principles of "Donggwoldo(東闕圖)" and produced a floor plan of the surroundings near Geumcheongyo Bridge in Changdeokgung Palace through the use of rubber sheeting transformation. Projective transformation was confirmed as most suitable during the transformation, and with standard error of 2.1208m, the relatively high accuracy of the transformation shows that the production of a floor plan for "Donggwoldo(東闕圖)" is significant. Furthermore, it implies the possibility of producing floor plans for various documentary paintings produced using the paralleled oblique drawing method in addition to "Donggwoldo(東闕圖)". Third, the study evaluated the accuracy of the spatial information provided by the produced floor plan by comparing the three items of Geumcheongyo Bridge location, Geumcheongyo Bridge and Jinseonmun Gate arrangement, and Geumcheon stone embankment location. The results confirmed the possibility of utilizing the floor plan as a useful tool which helps understand the appearance of the surroundings at the time of "Donggwoldo(東闕圖)" production because it is parallel to the excavation results of the Geumcheongyo Bridge and its context. Therefore, the present study is significant in that it seeks the possibility of producing spatial information recorded in "Donggwoldo(東闕圖)" by applying rubber sheeting transformation and consequently in that it presents a new methodology for understanding the appearance of the East Palace of the Late Joseon Period.

• Journal of radiological science and technology
• /
• v.29 no.4
• /
• pp.225-228
• /
• 2006

Purpose: Accurate clinical evaluation of the alignment of the calcaneus relative to the tibia in the coronal plane is essential in the evaluation and treatment of hindfoot pathologic condition. Previously described standard anteroposterior, lateral, and oblique radiographic methods of the foot or ankle do not demonstrate alignment of the tibia relation to the calcaneus in the coronal plane. The purpose of this study was to introduce hindfoot coronal alignment view. Material : 1) Both feet were imaged simultaneously on an elevated, radiolucent foot stand equipment. 2) Both feet stood on a radiolucent platform with equal weight on both feet. 3) Both feet are located foot axis longitudinal perpendicular to the platform. 4) Silhouette tracing around both feet are made, and line is then drawn to bisect the silhouette of the second toe and the outline of the heel. 5) The x-ray beam is angled down approximately $15^{\circ} to $20^{\circ} Result : 1) This image described tibial axis and medial, lateral tuberosity of calcaneus. 2) Calcaneus do not rotated. 3) The view is showed by talotibial joint space. Conclusion: Although computed tomographic and magnetic resonance imaging techniques are capable of demonstrating coronal hindfoot alignment, they lack usefulness in most clinical situations because the foot is imaged in a non-weight bearing position. But hindfoot coronal alignment view is obtained for evaluating position changing of inversion, eversion of the hindfoot and varus, valgus deformity of calcaneus.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.176-182
• /
• 2020

Purpose: To evaluate the effects of load direction, number of implants, and alignment of implant position on stress distribution in implant, prosthesis, and bone tissue. Materials and Methods: Four 3D models were made to simulate posterior mandible bone block: two implants and 3-unit fixed dental prosthesis (FDP) with a pontic in the center (model M1), two implants and 3-unit FDP with a cantilever pontic at one end (model M2), FDP supported by three implants with straight line placement (model M3) and FDP supported by three implants with staggered implant configuration (model M4). The applied force was 120 N axially or 120 N obliquely. Results: Peak von Mises stresses caused by oblique occlusal force were 3.4 to 5.1 times higher in the implant and 3.5 to 8.3 times higher in the alveolar bone than those stresses caused by axial occlusal force. In model M2, the connector area of the distal cantilever in the prosthesis generated the highest von Mises stresses among all models. With the design of a large number of implants, low stresses were generated. When three implants were placed, there were no significant differences in the magnitude of stress between staggered arrangement and straight arrangement. Conclusion: The effect of staggering alignment on implant stress was negligible. However, the number of implants had a significant effect on stress magnitude.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.1
• /
• pp.15-39
• /
• 2019

An ultramafic complex occurs as an isolated lenticular body in the Andong area. The Andong ultramafic complex comprises ultramafic and mafic rocks, but mainly peridotites. The complex extends for several kilometer to ENE direction, adjacent to the Andong fault line. This study is for petrochemistry of the peridotites within the ultramafic complex and characteristics of asbestos occurrences. The peridotites are igneous origin, ranging from lherzolite to wehrlites and are characterized by high Fo olivine ($Fo_{0.85-0.87}$), Mg clinopyroxene ($Mg_{87.5-93.5}$), and tremolitic to tschermakitic hornblende. Geochemically, these rocks show high magnesium number (mainly Mg = 85.3-87.38) and transitional element and low alkali element contents. The peridotites host asbestos, including chrysotile, tremolite and actinolite asbestos, but dominated by amphibole asbestos. The amphibole asbestos are found along small fault face, and cleavage and fracture showing several cm to ten cm in width as slip and oblique fibers, while the chryostiles occur at cleavage and vein showing several mm-cm in width as cross and slip fibers. They are confirmed by PLM, XRD and SEM results. Overall characteristics of peridotites from the Andong ultramafic complex and occurrences of the asbestos are similar to those of worldwide orogenic related Alpine type ultramafic rocks and serpentinized ultramafic bodies in Chungnam, Korea, respectively.