• 제목/요약/키워드: OTE

Search Result 21, Processing Time 0.02 seconds

담배나방 발육에 미치는 온도의 영향 (Effect of Temperature on Development of Oriental Tobacco Budworm, Helicoverpa assuta Guenee)

  • 한만위;이준호;이문홍
    • 한국응용곤충학회지
    • /
    • 제32권2호
    • /
    • pp.236-244
    • /
    • 1993
  • 온도가 담배나방 발육에 미치는 영향을 알아보기 위하여 18~$33^{\circ}C$ 사이의 7개 온도조건에서 인공사료를 이용하여 광주기 14:10 조건에서 사육하였다. 알, 유충, 용의 발육기간은 전체 발육기간에 대해서 각각 10, 48, 42% 정도를 점유하였다. 발육영점온도는 알, 유충, 용, 전체발육기간(알에서 성충까지)에 따라 각각 8.62, 12.65, 11.64, $11.89^{\circ}C$였다. 평균발육속도를 Sharpe와 Demichele(1977)이 제시한 비선형모델에 적용한 결과 온도에 따른 발육특성을 잘 설명할 수 있는 것으로 나타났으며 ($r^2$=0.993~0.996), 발육기간분포의 특성을 알기 위하여 정규화한 누적발유기간분포를 Weibull분포에 적용한 결과 높은 적합성을 나타내었다($r^2$=0.987~0.999).

  • PDF

Off-gas Analyzer를 이용한 하수처리장 단일선회류 방식 포기시스템 산소전달 효율의 평가 (Oxygen Transfer Efficiencies of A Single Spiral Roll Aeration System by the Off-gas Method)

  • 박보화;고광백;박재한;임세호;신동록;윤혜정;이지영;문태훈
    • 한국물환경학회지
    • /
    • 제22권3호
    • /
    • pp.534-539
    • /
    • 2006
  • The supply of oxygen for aeration is the largest energy consumer at activated sludge wastewater treatment plants. Replacement of less efficient aeration systems with fine pore aeration devices can save up to 50 percent of aeration energy costs. The purpose of this study was the diagnosis and evaluation of a domestic wastewater aeration system by the off-gas method which had been studied by US EPA and ASCE. For this study, an off-gas analyzer and its hood were made to collect off-gas. Also, a vacuum pump was connected to the analyzer to make suction of off-gas. Experiments were conducted at a domestic activated sludge wastewater treatment plant which had a single spiral roll aeration system installed with P.E tube diffuser. Data on OTE(f), SOTE(pw), OUR, and air flow rate were obtained from these experiments. In case of replacing an aeration system, it is recommended that it should be replaced with perforated membrane disc or ceramic disc fine bubble diffusers installed in a full floor coverage or grid pattern.

활성 슬러지조 폭기를 위한 에너지 절감형 판형 멤브레인 산기장치의 개발 (Development of Energy Saving Aeration Panel for Aerating in Activated Sludge System)

  • 김지태;탁현기;김종국
    • 대한환경공학회지
    • /
    • 제34권6호
    • /
    • pp.414-420
    • /
    • 2012
  • 에너지 절감형 산기장치의 상용화를 목적으로 국내 J사의 인장강도 $400kg_f/cm^2$ 이상, 두께가 0.5 mm의 폴리 우레탄 시트를 확보하고 고무 시트의 천공에 가장 널리 이용되는 방식인 needle을 이용한 천공방법을 택하여 기공의 크기가 $100{\mu}m$ 정도의 판형 멤브레인 산기장치를 제작하였다. 판형 산기 모듈 제작 후 실험실 및 파일롯 규모의 테스트 결과, 수조 450 L, 수온 $20^{\circ}C$, 공기량 40 L/min인 실험실 테스트에서 3분 내에 DO가 5 mg/L을 넘었고, 8분 내에 DO가 포화치에 가까운 8 mg/L 이상이 됨을 알 수 있었다. 이때의 $K_{La(15)}$$16.34hr^{-1}$, 표준산소전달효율은 54.7%, 표준폭기효율는 7.88 kg/kwh로 상당히 높은 효율의 실험결과를 보였다. 수조 2 $m^3$, 수온 $19^{\circ}C$, 공기량 30 L/min인 파이롯 규모의 테스트에서는 8분 내에 DO 농도가 5 mg/L를 넘었고, 이때의 $K_{La(15)}$$5.8hr^{-1}$, 표준산소전달효율은 42.1%, 표준폭기효율는 6.41 kg/kwh로 기존 산기관의 2~2.5배 높은 효율의 실험결과를 보였다. 특히 단위 동력당 산소전달률이 높아 경제성이 높음을 나타내었다. 기존 산기관의 적용에서 청수에서의 산소전달효율이 실제 폐수에서의 산소전달률의 차이로 인한 문제가 빈발하여 실제 $40^{\circ}C$ 축산폐수에서 테스트한 결과 $OTE_f$는 22.1% $OTE_{pw40}$이 39.6%로 매우 높은 효율을 보였다.

Carbonate Crystal Growth Controlled by Interfacial Interations of Artifical Cell Membranes

  • Goh, Dai-Young;Ahn, Dong-June
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제2권2호
    • /
    • pp.109-112
    • /
    • 1997
  • Morphology of carbonate crystals grown on the surface of artificial cell membranes was controlled by changing the interfacial chemistry. For octadecyltriethoxysilane (OTE) films with terminal methyl groups interacting little with an aqueous calcium carbonate solution calcite (104) crystals were formed. Polymerized pentacosadiynoic acid (PDA) films with terminal carboxylic acid groups induced deposition of calcite (012) crystals aligned along with each other within a polymer domain. On the other hand, stearyl alcohol (StOH) films with terminal hydroxyl groups induced deposition of aragonite crystals. When PDA was mixed with StOH, the 8:1 PDA:StOH (molar ratio) film produced dominating calcite (012) crystals without any crystal alignment, and the 4:1 mixture film produced minor calcite (012) crystals and major aragonite crystals. For the 2:1, 1:1, 1:2, and 1:4 mixture films, aragonite crystals were dominating. Hence, it is found that the chemical composition at the interface plays a very important role in controlling the morphology of deposited carbonate crystals.

  • PDF

OTF계산값을 이용한 ERF계산 (Computation of the ERF from the OTF)

  • 심상현
    • 한국광학회지
    • /
    • 제4권2호
    • /
    • pp.140-144
    • /
    • 1993
  • Optical Transfer Function(OTE)으로부터 Edge Response Function(ERF)을 계산하는 computer program을 작성하였다. 이 program을 사용하여 무수차 광학계와 몇가지 형태의 수차를 포함하는 광학계의 ERF를 계산하였다. 왜곡수차, 촛점이동, 비점수차, 코마 또는 구면수차 등의 단일수차 및 이들이 조합된 몇가지 형태의 복합수차 등을 포함하는 광학계를 고려하였다. 계산의 결과로부터 sagital case의 경우, 촛점이동이나 구면수차가 코마에 비하여 ERF에 나쁜 영향을 미치며, tangential case의 경우, 코마가 촛점이동과 구면수차보다 나쁜 영향을 미침을 알았다. 한편 코마는 tangential case의 ERF의 형태와 위치를 변화시키지만 왜곡수차는 상의 위치만을 변화시킨다는 것도 확인 할 수 있었다. 또한 코마와 왜곡수차를 포함하는 광할계의 tangential case의 ERF는 이들중 하나의 수차만 포함하는 경우보다 오히려 좋은 형태를 나타내어 두 수차가 상호 보완적인 영향을 미침을 알았다.

  • PDF

H형강 플랜지 두께변화에 따른 구조용집성재 접합부의 탄소성거동 (Elasto-plastic behaviour of structural laminated timber joint by flange thickness of H beam)

  • 김순철;양일승
    • 한국강구조학회 논문집
    • /
    • 제18권3호
    • /
    • pp.385-393
    • /
    • 2006
  • 목구조의 효율적인 이용은 건설산업에 있어 자재생산에 따른 에너지의 대량소비 및 폐기물유발을 감소할 수 있어 친환경적인대응방안으로 주목받고 있다. 이러한 친환경적인 목재의 수요를 증대시키기 위해서는 중 대형 목구조를 필요로 하는데 기존의 단일부재 및 접합부로써 중 대형 목구조를 실현하는 데는 한계가 있다. 그러므로 중 대형 목구조의 가능성을 높이기 위해서는 구조용집성재의 사용 및 다른 재료를 병합한 효율적인 접합방법이 필요로 하게 된다. 본 연구는 중 대형 목구조용 2방향 라멘접합부 개발을 목표로 하여 H형강과 구조용집성재를 사용한 플랜지의 두께(None, 6mm, 9mm, 12mm)이며, 접합부의 휨 실험을 통해 강성, 강도, 구조용집성재의 응력분포, H형강 플랜지의 변형도 및 파괴형상을 파악하였다. 실험결과, H 형강의 플랜지 두께가 9mm, 12mmm인 실험체는 높은 강도와 우수한 변형능력을 발휘하였다. 또한 H 형강의 플랜지 두께가 9mm, 12mm인 실험체의 이력거동은 매우 크고 매우 높은 에너지 흡수능력을 가지고 있었다.

동아시아 유럽 북미 컨테이너항만의 상대적 효율성 비교 분석 (Comparison of Efficiencies of Container Ports in the East Asia, Europe, and North America)

  • 박구웅
    • 한국항만경제학회지
    • /
    • 제26권4호
    • /
    • pp.219-246
    • /
    • 2010
  • 각 국은 국제무역 및 물류에 있어서 항만의 역할과 가치의 중요성에 주목하면서 자국 항만의 경쟁력을 강화시키기 위한 정책과 전략을 추진하고 있다. 본 연구의 목적은 전 세계 컨테이너물동량의 대부분을 차지하고 있는 3개 지역, 즉 동아시아, 유럽, 북미지역의 주요 컨테이너항만의 효율성을 비교하고 효율성에 영향을 미치는 요소들을 분석하여 제시하는데 있다. 효율성을 비교분석하기 위해 45개 항만을 대상으로 5개의 투입요소와 2개의 산출요소를 가지고 DEA 모형을 이용하였다. 또한 처리물량, 총 효율성, 기술적 효율성, 규모의 효율성 각각에 영향을 미치는 요소를 분석하기 위해 회귀분석을 실시하였다. 분석결과 동아시아 항만이 유럽과 북미의 항만보다 규모가 작음에도 불구하고 더 많은 성과를 내고 있으며 기술적으로나 규모면에서 상대적으로 더 효율적으로 나타났다. 본 연구의 분석이 지역별 항만의 특징과 효율성을 이해하는데 도움이 되고, 각 지역의 항만의 이용과 발전방향의 설정에 참조가 되기를 기대한다.

LiCl-KCl 용융염에서 광학적으로 투명한 전극을 이용한 사마륨 이온의 전기화학적 거동에 관한 연구 (A Study on Electrochemical Behaviors of Samarium Ions in the Molten LiCl-KCl Eutectic Using Optically Transparent Electrode)

  • 이애리;박병기
    • 방사성폐기물학회지
    • /
    • 제15권4호
    • /
    • pp.313-320
    • /
    • 2017
  • LiCl-KCl 용융염에서 광학적으로 투명한 텅스텐 망으로 제작된 작업전극에 대해 사마륨의 전기화학적 거동을 Cyclic voltammetry와 Potential step chronoabsorptometry의 전기화학적 및 분광전기화학적 방법으로 조사하였다. Cyclic voltammogram으로 결정된 $Sm^{3+}/Sm^{2+}$의 산화환원 반응의 가역성을 기반으로 형식전위와 확산계수를 계산하여 각각 -1.99 V vs. $Cl_2/Cl^-$$2.53{\times}10^{-6}cm^2{\cdot}s^{-1}$를 얻었다. 작업 전극에 -1.5 V vs. Ag/AgCl (wt%)로 전압을 인가하여 측정한 Chronoabsorptometry를 통해 사마륨 이온의 특성 파장으로 $Sm^{3+}$에 대해 408.08 nm, $Sm^{2+}$에 대해 545.62 nm를 확인하였다. Voltammogram에서 얻은 환원 피크 전압과 산화 피크 전압을 이용하여 Potential step chronoabsorptometry를 수행하였다. 545.63 nm의 흡광피크 값을 분석하여 $2.15{\times}10^{-6}cm^2{\cdot}s^{-1}$의 확산계수를 얻었으며 이 값은 동일한 온도에서 Cyclic voltammtry 분석으로 얻은 값과 큰 차이를 보이지 않았다. 실험결과로부터 고온 용융염에서 광학적으로 투명한 작업전극을 이용한 분광전기화학적 방법이 용융염에 용해된 이온의 종류를 확인하며 전기화학적 거동을 조사하는데 유용한 도구로 활용될 수 있음을 확인하였다.

Off-gas Column Test를 이용한 하수처리장 심층포기시스템의 산소전달 매개변수(α와 F)의 산정 (Evaluation of the Oxygen Transfer Parameters (α and F) of a Coarse Bubble Aeration System by Off-gas Column Test)

  • 김철웅;임세호;신동록;이지영;박재한;안윤희;고광백
    • 한국물환경학회지
    • /
    • 제22권6호
    • /
    • pp.1119-1122
    • /
    • 2006
  • Aeration by using diffusers usually requires approximately 50~90% of the total electricity needed to operate WWTP (WasteWater Treatment Plant)s. Accurate evaluation of the oxygen transfer efficiency for an aeration system, and recommendation of a better alternative may help saving WWTP operational costs. Appropriate techniques and methods to achieve this purpose have not been introduced in Korea. In this study, in-process analysis was performed for a coarse bubble aeration system by the off-gas method to evaluate its applicability in Korea. To accomplish this analysis, an off-gas test, unsteady-state clean water test and steady-state off-gas column test was conducted and comparisons to other aeration systems were made. The ${\alpha}$ and the F estimated from the results of the unsteady-state clean water test and the steady-state off-gas column test were 0.61 and 0.90 respectively in a coarse bubble aeration system. The comparison of P.E tube diffusers laid out single spiral roll and ceramic dome diffusers laid out full floor coverage showed that the oxygen transfer efficiency of the coarse bubble aeration system was less than or similar to other aeration systems. But, airflow rates per unit area were 4~5 times greater than other aeration systems. In regards to the oxygen transfer efficiency for airflow rates per unit area, a retrofit to higher efficiency diffusers was urgently needed. This study showed proved that off-gas methods can apply to evaluate diffuser performances to estimate operating factors and to compare other aeration systems in Korea.

양식해태의 유통에 관한 조사 연구 (A Study on Marketing of Cultured Laver Products)

  • 유충열
    • 수산경영론집
    • /
    • 제4권1_2호
    • /
    • pp.19-57
    • /
    • 1973
  • Laver io one of the most necessary and seasonal items in Korean food from oldtimes. Laver is lagely eaten in dried form, and its supply depends entirely upon culture weeds. The history of laver culture in Korea about sixty or seventy years is older than in Japan. Significance of laver culture is divided into two aspects, one is food supply in the nation, and the other is export to other countries. Houses engaged in laver culture are about foully thousands, and laver production in 1972 is estimated as 1, 3 bitten sheets. (1 sheet is a dried laver of 20 cm sq, in the shape of paper) Especcially meaning of layer production is the concentration of labour input, and systematic management of labour. From around 1920, the method of laver culture was introduced by Japanese Imperialism for mono culture in shallow seas, and mass products of laver is provided to Japan market, DOMESTIC MARKET Fundamental consume function calculates at below, $D_{(68_71)}$=16354 $Y^{0.471}$ $P^{-1.0662}$ where D is total layer demand, Y income variable, P price variable. It means income elasticity is 476. in the whole country, and price elasticity is 1, 07. But generally income elasticity is higher in urban area than in rural area, as shown at 1, 3 in Seoul city. Expence of laver in house expenditure is mutually correlated with another expence, See Table 12 about the relative function. See Table 14 and 16 about the relation between the gathering and the changes of price in auction, wholesale and retail price support system is for two effects, one of which is constraint of the upper price, the other is rise of the lower price. Before the system control, the equation in three year average calculated as below, $Y_{b}$ =18, 907.7455+15435.9364 t (r=0.89) where the origin t=0 is the November and the units are month. Post the system control, $Y_{p}$ =30, 047.9636+1, 631.1721t (r=0.97) therefore, this system has an effect only on the rise of lower price, Average annual margins of laver products at four market levels according to the consumer spent is below. EXPORTING MARKET Japanese demand function of laver products is, Log D=5, 289+1, 108 Log Y-1, 395 Log P (r=0.987) where D is Japanese laver demand, Y income variable, P price variable. according to which income elasticity is 1. 1 and price elasticity is 1.4. Laver production in 1970 tile highest record till then, is estimated as six billion sheets. But the recent improvement of laver culture techniques, the production of seeds and freezing storage of seeds has been stabilized. Futher new culture farms have been developed by means of break- water fences or by floating culture method. These improvements have been backed up with increased demand of laver products. Import quantity and price of Korean laver products are restrained by three organizations, that is producer, distributor and consumer. This relationship calculated by regression equation shows that import is influenced only producer organization, at the sacrifice of consumer profit. For increase to export of laver products, we urgently require to open foreign trade of laver products for Japanese consumer, .and Japan has political responsibility to solve Korean laver structure. But with long run timeseries, as regards Japanese production and import quantity, importing function shows increasing trend as below, 250 million sheets <3, 947.1674+0.005 $L_{g}$ >) 600 million sheets where $L_{q}$ is relative production quantity of laver in Japan. (unit; 100 thousand sheets) Our Export effort should be put on the highly processed products whithin the restraind quote.ote.

  • PDF