• International Journal of Automotive Technology
• /
• v.3 no.1
• /
• pp.33-40
• /
• 2002

Increasingly stringent emission regulations of EU and CARB (California Air resource Board) require mandatory OBD (On Board Diagnostics) far the catalytic converters of a vehicle. It demands that MIL(Malfunction Indication Light) should be tuned on to inform the driver of catalytic converter failures. Currently dual oxygen sensor method Is widely used for the converter OBD. However, since it works only alter converter light-off, it has a serious limitation when applied to TLEV or more stringent emission regulations where more than 85% of total emission is coming out before converter light-off. In addition, a recent development in catalyst material. coating technology and additive catalysts leads to a much improved OSC (Oxygen Storage Capacity) after converter light-off, current methods are very difficult to determine levels of converter aging. Therefore, it is desired to develop an OSC detecting method before converter light-off to diagnose converter failures with higher reliability. In this study, OSCs of converters are measured by an absolute measuring method and a dynamic measuring method, and some of fundamental ideas are suggested about converter OBD before converter light-off. The converters are aged with two different aging methods; those are a furnace aging and an engine bench aging: to represent aging conditions in actual field applications. Dual oxygen sensor method at the lower temperature than light-off is also studied at a model gas bench with the converters. It is fecund that there is a certain point in temperature lower than light-off where difference due to aging level becomes maximum, thus a proper dynamic method to effectively monitor catalytic converters could be implemented fur the range lower than light-off temperatures. With this result, the aging level of converters is examined at an engine bench.

• Korean Journal of Food Science and Technology
• /
• v.48 no.3
• /
• pp.201-207
• /
• 2016

This study was conducted to produce oligosaccharides from buckwheat hull by using commercial enzymes. Yields of oligosaccharides obtained by enzymatic hydrolysis of the cellulose and hemicellulose fractions were 132.37 and 393.04 g/kg, respectively. Xylose, glucose, fructose, xylobiose, xylotriose, cellobiose, and cellotriose were detected in the hydrolysate produced from buckwheat hull. Antioxidant activity of oligosaccharide from cellulose fraction (OSC) reduced with increasing hydrolysis time; however, the antioxidant activity of oligosaccharide from hemicellulose fraction (OSF) increased as the hydrolysis time was prolonged. OSF and OSC showed higher increase in viable counts compared to the control. As a result, oligosaccharides produced from buckwheat hull by enzymatic hydrolysis showed antioxidant activity and prebiotic effects. It is suggested that utilization of oligosaccharides produced from buckwheat hull as functional food materials may be improved when hydrolysis time and conditions are controlled for this purpose.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.3
• /
• pp.240-248
• /
• 1999

To investigate the expression pattern of noncollagenous bone matrix proteins such as osteonectin(OSN), osteopontin(OPN) and osteocalcin(OSC) mRNA during bony healing procedure induced by guided bone regeneration method, we made artificial defects on bilateral femur of rats. Then induced bony healing by application of a nonabsorbable PTFE membrane in experimental sites and without its application in control sites for 3 weeks. The mRNA expression pattern at specimens obtained at 1, 2 and 3 weeks after operation was detected by in situ hybridization method using its antisense mRNA probes. The experimental sites revealed more rapid and favorable bony healing than control sites and new bone formation was limited within defected area by inhibitory activity of bone marrow cells. In experimental sites, the OSN and OSC mRNA were expressed strongly on osteoblasts of regenerating cortical bone at 1st week and on osteoblasts lining the trabecular bone in marrow space at 3rd week, whereas, in control sites, their expression were noted on osteoblasts lining the reactively formed sponge bones at 2nd and 3rd week. In addition, the OPN mRNA was expressed on osteoblasts and osteoclasts at sites of remodeling and osteocytes of remained trabecular bone of defected area in experimental sites and on macrophages at 1st week and osteoclasts at sites of remolding at 2nd and 3rd week in control sites. The above findings suggest that the more rapid and favorable bony healing might be induced by blocking of invading fibrous connective tissue into bony defects. And the earlier expression of OSN and OSC mRNA on osteoblasts of experimental sites suggest that the formation and resorption of regenerating bone was more rapidly progressed in confined spaces made by applicate membranes.

• Land and Housing Review
• /
• v.12 no.4
• /
• pp.103-117
• /
• 2021

With the current rapid changes in population and technology, the long-lastig housing certification system is a means of prolonging the physical and functional lifespan of a building. The certification requires differentiation between the structure and infill elements to allow for variability and ease of repairs. This works well with prefabricated houses so this study investigated the possibility of applying the long-lastig housing certification requirements to apartment construction using off-site construction (OSC) methods focused on the installation of bathrooms (plumbing and toilet) that differ from the traditional wet method. This study examined three different sized floor plans at 22 m², 46 m², and a combined one resulting in 69 m². The larger 69 m² plan utilized a removeable non-load bearing wall to increase flexibility in the layout of the floorplan. The apartments are constructed of steel reinforced concrete composite columns on a 9 m × 10.5 m grid with integrated slabs. The exterior and interior infill walls are all non-load bearing with some containing plumbing. This separation of the structure and infill walls can help meet some of the criteria in the long-lastig housing certification, particularly with the ease of repairs. Technologies that facilitate the replacement of infill elements that contain plumbing and other building services can benefit the nation by reducing carbon emissions and therefore tax incentives should be introduced to increase the adoption of the proposed construction methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.888-895
• /
• 2020

In the construction industry, off-site construction (OSC) is drawing attention as a production method due to changes in working hours and the supply and demand of manpower. In 1991, there was a policy of spreading and expanding the use of precast concrete (PC) apartment homes, but they have not been actively used so far since they were discontinued due to quality problems. In this study, policy tasks were analyzed to motivate the application of OSC-based PCs in the apartment housing sector, and policy directions were derived by conducting focus group interviews (FGI). Nine policies are suggested regarding the following topics: PC apartment supply quantity provision, priority application of public housing, priority supply of public housing, preferential floor area ratio, funding, tax support, improvement of business area structure, improvement of delivery method, factory certification system, and training of experts. The results of the FGIs are as follows. First, in order to revitalize PC apartment homes, leading efforts from the public sector are required. Second, rather than reorganizing the business sector or introducing a new delivery method, a policy direction that induces the strengthening of cooperation is desirable. Third, PC activation should be promoted on an institutional basis for securing appropriate construction costs and quality.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.6
• /
• pp.978-984
• /
• 2016

Osteoporosis is a disease that often occurs in postmenopausal women. The purpose of this study was to examine the positive effects of Cheongukjang powder containing menaquinone-7 (MK-7) on bone health circulation in postmenopausal women. Fifty-six postmenopausal women were recruited into a randomised double-blind placebo-controlled trial. The participants were randomly assigned into two groups. For 12 weeks, one group received $800{\mu}g$ MK-7 in the form of Cheongukjang packs (CMK-7), and the other group received the same amount of identical-looking placebo packs containing barley meal for 12 weeks. Femoral bone mineral density (BMD), bone-specific alkaline phosphatase (ALP), deoxypyridinoline (DPD), osteocalcin (OSC), serum Ca, and serum P were measured at baseline (0 weeks) and 12 weeks. After 12 weeks in the CMK-7 group, it was found that BMD, serum Ca, and serum P had increased above the baseline (p<0.0001, p=0.0028, p<0.0001), whereas bone-specific ALP, DPD, and OSC had decreased below the baseline (p=0.0003, p<0.0001, p<0.0001). Therefore, MK-7 taken as Cheongukjang is expected to prevent osteoporosis in postmenopausal women.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.385-385
• /
• 2011

Si 또는 반도체 화합물을 기반으로 한 태양전지의 높은 원재료 가격과 복잡한 공정 등의 문제점들을 해결하기 위한 방안으로 반도체성 고분자인 Poly(3-hexylthiophene)(P3HT)과 C60 유도체인 PCBM을 광활성 층으로 이용하여 유기 태양전지(Organic Solar Cell, OSC)를 제작하였다. 하지만 상대적으로 낮은 효율을 갖는 OSC의 단점을 해결하기 위해서 유기물 자체가 갖고 있는 광 안정성, 낮은 전하 이동도 및 광 에너지 흡수대 등의 문제점들의 해결 방안들이 제시되고 있다. 본 연구에서는 광활성 층을 사용한 유기 태양전지의 특성에서 후열처리에 따른 유기 태양전지의 전기적 및 구조적, 광학적인 특성들이 소자의 효율에 끼치는 영향에 대해 분석하였다. 후열 처리 온도에 따른 광활성 층의 구조적인 특성을 분석하기 위해 EFM 이미지와 XRD패턴을 측정하였는데 열처리 후 박막의 전기적인 포텐셜과 결정성 향상의 유기 태양전지의 효율향상에 기여함을 알 수 있었다. 또한 임피던스 분석 장치를 이용해 후열 처리에 따른 소자의 Resistance, Capacitance, I-V 곡선들을 분석한 결과 최적의 조건에서 열처리된 광활성 층은 전하들의 이동을 조절하여 소자 내에서 Capacitance를 증가시키는 것 뿐만 아니라 전극과 유기물 층 사이의 계면 특성을 향상시킴으로써, 소자의 효율을 증가시키는 원인으로 작용함을 확인 하였다.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.840-848
• /
• 2016

A primary-side regulation AC-DC converter operating in the PFM (Pulse Frequency Modulation) mode with a high precision output current is designed, which applies a novel inductance compensation technique to improve the precision of the output current, which reduces the bad impact of the large tolerance of the transformer primary side inductance in the same batch. In this paper, the output current is regulated by the OSC charging current, which is controlled by a CC (constant current) controller. Meanwhile, for different primary inductors, the inductance compensation module adjusts the OSC charging current finely to improve the accuracy of the output current. The operation principle and design of the CC controller and the inductance compensation module are analyzed and illustrated herein. The control chip is implemented based on a TSMC 0.35μm 5V/40V BCD process, and a 12V/1.1A prototype has been built to verify the proposed control method. The deviation of the output current is within ±3% and the variation of the output current is less than 1% when the inductances of the primary windings vary by 10%.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.1
• /
• pp.27-32
• /
• 2011

In this study, we have investigated the power conversion efficiency of organic solar cells utilizing conjugated polymer/fullerene bulk-hetero junction(BHJ) device structures. We have fabricated poly(3-hexylthiophene)(P3HT), poly[2methoxy-5-(3',7'-dimethyloctyl-oxy)-1-4-phenylenevinylene] as an electron donor, [6,6]-phenyl $C_{61}$ butyric acid methylester(PCBM-$C_{61}$)as an electron acceptor, and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS) used as a hole injection layer(HIL), after fabricated active layer, between active layer and metal cathode(Al) deposited LiF interlayer(5 nm). The properties of fabricated organic solar cell(OSC) devices have been analyzed as a function of different thickness. The electrical characteristics of the fabricated devices were investigated by means J-V, fill factor(FF) and power conversion efficiency(PCE). We observed the highest PCEs of 0.628%(MDMO-PPV:PCBM-$C_{61}$) and 2.3%(P3HT:PCBM-$C_{61}$) with LiF inter-layer at the highest thick active layer, which is 1.3times better than the device without LiF inter-layer.

• Molecules and Cells
• /
• v.22 no.3
• /
• pp.269-274
• /
• 2006

In order to characterize saikosaponin biosynthesis in Bupleurum falcatum, the expression of five isoprenoid pathway genes and their relationship to saikosaponin accumulation in the hairy roots were analyzed. The hairy roots exhibited a rapid accumulation of saikosaponins when incubated in a root culture medium (3XRCM). Homology-based RT-PCR was used to isolate core fragments of five genes, HMGR, IPPI, FPS, SS, and OSC, from the hairy roots. The deduced amino acid sequences exhibited amino acid identities of more than 85% to previously reported genes. Using the fragments as probes, the expression of these five genes in the hairy roots during incubation in 3XRCM medium was examined. Expression of all five genes in the hairy roots increased soon after incubation. In particular, the SS and OSC genes were coordinately induced at 8 days of incubation, and their expression persisted throughout the incubation period. A quantitative HPLC analysis showed that the saikosaponin content of the hairy root culture also began to increase at 8 days of culture. The correlation between SS transcript level and saikosaponin content in the hairy roots suggests that transcriptional regulation plays a regulatory role in saikosaponin biosynthesis.