• Construction Engineering and Management
• /
• v.20 no.5
• /
• pp.12-18
• /
• 2019

• Construction Engineering and Management
• /
• v.21 no.6
• /
• pp.29-32
• /
• 2020

• Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.36-42
• /
• 2021

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1127-1127
• /
• 2001

The transfer of predictive models using various chemometric techniques has been reported for FTNIR and scanning-grating based NIR instruments with respect relatively dry samples (<10% water). Some of the currently used transfer techniques include slope and bias correction (SBC), direct standardization (DS), piecewise direct standardization (PDS), orthogonal signal correction (OSC), finite impulse transform (FIR) and wavelet transform (WT) and application of neural networks. In a previous study (Greensill et at., 2001) on calibration transfer for wet samples (intact melons) across silicon diode array instrumentation, we reported on the performance of various techniques (SBC, DS, PDS, double window PDS (DWPDS), OSC, FIR, WT, a simple photometric response correction and wavelength interpolative method and a model updating method) in terms of RMSEP and Fearns criterion for comparison of RMSEP. In the current study, we compare these melon transfer results to a similar study employing pairs of spectrometers for non-invasive prediction of soluble solid content of peaches.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.113-116
• /
• 2008

The active layer thickness and curing condition dependent performance of an organic thin film transistor (OTFT) with inkjetted organic semiconductor (OSC) layer is studied The best performance of the OTFT was found when the thickness of ose was ~120 nm cured at $60^{\circ}C$. The performance enhancement of the OTFT with inkjetted OSC layer was discussed by comparing the OTFT with spin-coated ose layer.

• Journal of electromagnetic engineering and science
• /
• v.18 no.2
• /
• pp.141-143
• /
• 2018

Two 110-GHz oscillators have been developed in 65-nm CMOS technology. To study the effect of layout on the circuit performance, both oscillators had the same LC cross-coupled topology but different layout schemes of the circuit. The oscillator with the conventional cross-coupled design (OSC1), showed an output power of -3.9 dBm at 111 GHz with a phase noise of -75 dBc/Hz at 1-MHz offset. On the other hand, OSC2, with a modified cross-coupled line layout, generated an output power of -2.0 dBm at 117 GHz with a phase noise of -77 dBc/Hz at 1-MHz offset. The result indicates that the optimized layout can improve key oscillator performances such as oscillation frequency and output power.

• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1592-1599
• /
• 2018

The present study deals with the effect of dual cathode buffer layer (CBL) on the performance of bilayer of 4,4'-cyclohexylidenebis[N,N-bis(4-methylphenyl)benzenamine] (TAPC) and fullerene (C70)-based organic solar cell (OSC) with low donor concentration. OSC devices with CBLs have been fabricated using thermal vapor deposition technique. We report the use of lithium fluoride (LiF) and molybdenum trioxide ($MoO_3$) as CBLs. The insertion of LiF between C70 and aluminium (Al) electrode enhances the power conversion efficiency (PCE) of device from 1.89% to 2.47% but quenching of photogenerated excitons is observed at interface of C70 and LiF layers. Incorporation of $MoO_3$ between LiF and Al electrode further enhances PCE of device to 3.51%. This has also improved the material quality and device properties, by preventing the formation of gap states and diminishing exciton quenching.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.289-290
• /
• 2021

The PC system has advantages in terms of project management, such as shortening the construction period and reducing costs. However, it is difficult to activate the technology due to insufficient application of the technology. Therefore, there is a need for a strategy to expand and activate the PC system. This study is a basic research for PC construction project management, and its purpose is to derive the entire construction process from factory production of PC components to on-site construction. In this study, the construction process of the PC system was derived through literature review, and the main matters for the construction process management of PC system were confirmed in the analysis process. In the future, the results of this study are expected to be used as basic data for research for PC project management, such as deriving construction classification and calculating construction periods.

• Proceedings of the Korea Port Economic Association Conference
• /
• 2007.07a
• /
• pp.255-270
• /
• 2007

In North-East Asia, Port traffic in Asia-North America sea route has been rapidly increasing due to economic growth in China and ASEAN. Furthermore, the major shipping companies directly call at northern chinese ports like Qingdao, Dalian and Tianjin without passing through Korean ports on Asia-North America sea route. To acquire a port traffic and develop a hub port, governments in North-East Asia have intensively invested in the development of port. Therefore, Busan new port and Gwangyang port have been developed in Korea. According to the medium-long term development planning, the port should give a enormous budget investment for the port facilities construction. So the inaccurate estimation may lead to the unreasonable port development policy. Firstly, based on the estimation of Chiang Bong-Gyu & Yang Hang Jin(2005), this study gave a comparison with the estimation of Ministry of Maritime Affairs and Fisheries(2001) and OSC/Glori(2005). Secondly, taking into account the influence factors for port traffic, this study made an estimation of port traffic for Busan new port. On the basis of this estimation, this study is compared with the estimation of Ministry of Maritime Affairs and Fisheries(2001) and OSC/Glori(2005). In conclusion, in case of the development of Busan new port, based on the estimation of Ministry of Maritime Affairs and Fisheries(2001), this study should the high possibility that the Busan new port will be serious lack of the port facilities in the year of 2011. And according to the OSC/Glori(2005)'s estimation result, there is a lack of the port facilities, though we have modified the port investment plan.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.473.1-473.1
• /
• 2014

We report on the characteristics of Zr-doped $In_2O_3$ (IZrO) films prepared by DC-RF magnetron cosputtering of $In_2O_3$ and $ZrO_2$ targets for use as a transparent electrode for high efficient organic solar cells (OSCs). The effect of $ZrO_2$ doping power on electrical, optical, structural, and surface morphology of the IZrO film was investigated in detail. At optimized $ZrO_2$ RF power of 50 W, the IZrO film exhibited a low sheet resistance of 20.71 Ohm/square, and a high optical transmittance of 83.9 %. Furthermore, the OSC with the IZrO anode showed a good cell-performance: fill factor of 61.71 %, short circuit current (Jsc) of $8.484mA/cm^2$, open circuit voltage (Voc) of 0.593 V, and power conversion efficiency (PCE) of 3.106 %. In particular, the overall OSC characteristics of the cell with the IZrO anode were comparable to those of the OSC with the conventional Sn-doped $In_2O_3$ (FF of 65.03 %, Jsc of $8.833mA/cm^2$, Voc of 0.608 V, PCE of 3.495 %), demonstrating that the IZrO anode is a promising alternative to ITO anode in OSCs.