• Nuclear Engineering and Technology
• /
• v.31 no.4
• /
• pp.365-374
• /
• 1999

A nuclear design of fission moly production targets for a research reactor, HANARO was peformed. It was found that the use of MCNP-4A, ORIGEN-2 code was reliable for the analysis of production characteristics of $^{99}$ Mo in a target fuel at an irradiation holes. A parametric study was done for the optimization of target location, target dimension, target shape and fuel materials. It was shown that a fuel thickness was the most sensitive parameters and electro-deposited target gave the highest 99Mo yield ratio. A pellet target with vibro-compaction powder, however, showed the largest production capacity and better engineering feasibility even with less yield ratio. Ten kinds of optimized target design for both LEU and HEU satisfied all the given design constraints. The most favorable design was the HEU ring-shaped electro-deposited target, considered the safety limit, production yield, chemical process easiness, yield ratio, and amount of radioactive waste.

• Nuclear Engineering and Technology
• /
• v.29 no.4
• /
• pp.327-335
• /
• 1997

The correlation of isotope composition of uranium, plutonium and neodymium with the burnup in M uranium dioxide fuel has been investigated experimentally. The total and fractional($^{235}$ U) burnup were determined by Nd-148 and, U and Pu mass spectrometric method respectively. The isotope compositions of these elements, after their separation from the fuel samples were measured by mass spectrometric. The content of the elements in the irradiated fuel ore determined by isotope dilution mass spectrometric method using $^{233}$ U, $^{242}$ Pu and $^{150}$ Nd as spikes. The content of plutonium in the irradiated fuel was expressed by the correlation with uranium isotopes. The correlations between isotope compositions themselves and the total and fractional burnup ore compared with those calculated from ORIGEN2 code.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.545-550
• /
• 1998

PWR 사용후핵연료 내에 존재하는 $^{134}$ Cs/$^{137}$Cs 및 $^{154}$ Eu/$^{137}$Cs의 감마선 핵종비를 써서 각각 연소도를 결정하고, 그들의 차이가 최소가 되는 시간을 찾는 방법으로 사용후핵연료의 냉각시간을 결정하였다. $^{134}$ Cs/$^{137}$ Cs 및 $^{154}$ Eu/$^{137}$Cs의 핵종비로부터 연소도를 구하는 방법은 이들 핵종비에 대한 ORIGEN-5 코드 계산과 감마스캐닝 실험 결과를 비교하는 것이었다$^{[1]}$ . 사용후핵연료의 냉각시간을 임의의 시간으로 가정하고 핵종비 $^{134}$ Cs/$^{137}$ Cs을 써서 구한 연소도와 $^{154}$ Eu/$^{137}$Cs를 써서 구한 연소도의 차이를 계산했으며, 이 차이는 실제 측정대상 핵연료의 냉각시간에서 최소가 될 것을 기대하였다. 감마선 방출 핵분열생성물인 $^{134}$ Cs와 $^{154}$ Eu는 비교적 긴 반감기를 갖고 있으면서도 또 이들의 반감기 차이가 약 6.4년이나 되므로 기존의 방법$^{[2]}$ 에 비해 넓은 범위의 냉각시간을 정확하게 측정할 수 있었다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.847-852
• /
• 1995

A shielding analysis for KSC-7, the shipping cask for transporting the 7 PWR spent fuel assemblies, has been carried out. Radiation source term has been calculated on spent fuel with burnup of 50,000 MWD/MTU and 1.5 years cooling time by ORIGEN2 code. The shielding calculation for the cask has been made by using MCNP4A code with continuous cross section data library from ENDF/B-V. As a result of neutron dose rate analysis, another shielding calculational model on spent fuel shipping cask was provided which is using the Monte Carlo method.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.58-63
• /
• 1998

AMBIDEXTER(Advanced Molten-Salt Break even Inherently-Safe Dual-Mission EXperiment & TEst Reactor)는 토륨-우라늄 연료주기의 핵적자활성 요건을 설계하는 방법으로써 핵분열중간 생성물인 $^{233}$ Pa의 시간격리, 노내 방사성물질 농도저감, 잉여반응도 및 증식률향상을 위해 핵분열 생성물질의 온라인 정화.처리.재생 개념을 채택하고 있다. 본 연구에서는 AMBIDEXTER 로심의 핵분열성물질의 연소와 온라인 정화.처리에 따른 핵연료내 원소분포 변화를 기술하기 위해 핵분열생성물질의 평형포화농도에 대응하는 등가연소도(Equivalent Burnup)를 정의하고 이를 노심의 핵적자활성 요건에 대해 최적화하는 핵연료 정화공정의 시간상수 특성을 시뮬레이션 하였다. 핵분열생성물질농도의 동특성은 ORIGEN2 코드에 내장된 연속재처리 모델을 이용하여 해석하였으며 실용화가 입증된 후보정화공정들을 고려하여 모든 핵종을 5종의 핵종군으로 분류하여 평가하였다. 시뮬레이션 결과 유효정화주기를 0.1 (노심장전량/일)로 연속재처리 할 때 노심내 포화등 가연소도는 약 650 (MWD/TeH.E.)로 대응되며 이때 동일한 핵연료량으로부터 생성된 노내 핵분 열생성물질 평형농도는 최대연소도 33000MWD/TeU의 PWR 평형노심 BOC시의 대비해 약 1/10 에 해당하는 양이 잔유하는 것으로 나타났다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.660-665
• /
• 1998

The feasibility study on conceptual design methodology for accelerator-driven sodium-cooled sub-critical transmutation reactors has been conducted to optimize the design parameters from the scale laws and validates reactor performance with the integrated code system. A 1000 MWth sodium-cooled sub-critical transmutation reactor has been scale and verified through the methodology in this paper, which is referred to advanced Liquid Metal Reactor (ALMR). a Pb-Bi target material and a partitioned fuel are the liquid phases, and they are cooled by the circulation of secondary Pb-Bi coolant and by primary sodium coolant, respectively. Overall key design parameters are generated from the scale laws and they are improved and validated by the intergrated code system. Intergrated Code System (ICS) consist of LAHET, HMCNP, ORIGEN2, and COMMIX codes and some files. Through ICS the target region, the core region, and thermal-hydraulic related are analyzed once-through. Results of conceptual design are attached in this paper.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.197-202
• /
• 1997

ORIGEN2코드의 검증계산을 통해 PWR 사용 후 핵연료 조성핵종의 핵종량에 대한 핵임계측면에서 보수성을 가지는 안전인자를 산출하였고, MCNP코드의 검증계산으로 95/95 신뢰구간에서의 계산오차를 구하였다. 이를 바탕으로 직경이 1.2567cm이고 길이가 380.5cm인 196 개 금속봉을 장전한 캐니스터 ( 금속저장체 )가 x-y 방향으로 무한히 배열된 경우에 대해 캐니스터의 두께, 간격 및 외부의 공기중 수분농도에 따른 핵임계 안전해석을 수행하였다. 그 결과, 캐니스터의 두께가 7mm일 때 공기중 수분농도가 0.30 g/㎤이고 캐니스터간의 간격이 6.0cm인 경우의 최종핵 임계도값은 0.94130로서 최대허용핵임계값 (0.942)보다 적은 값을 보였다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2
• /
• pp.157-167
• /
• 2020

Removing radioactive concrete is crucial in the decommissioning of nuclear power plants. However, this process generates radioactive aerosols, exposing workers to radiation. Although large amounts of radioactive concrete are generated during decommissioning, studies on the internal exposure of workers to radioactive aerosols generated from the cutting of radioactive concrete are very limited. In this study, therefore, we calculate the internal radiation doses of workers exposed to radioactive aerosols during activities such as drilling and cutting of radioactive concrete, using previous research data. The electrical-mobility-equivalent diameter measured in a previous study was converted to aerodynamic diameter using the Newton-Raphson method. Furthermore, the specific activity of each nuclide in radioactive concrete 10 years after nuclear power plants are shut down was calculated using the ORIGEN code. Eventually, we calculated the committed effective dose for each nuclide using the IMBA software. The maximum effective dose of ¹⁵²Eu constituted 83.09% of the total dose; moreover, the five highest-ranked elements (¹⁵²Eu, ¹⁵⁴Eu, ⁶⁰Co, ²³⁹Pu, ⁵⁵Fe) constituted 99.63%. Therefore, we postulate that these major elements could be measured first for rapid radiation exposure management of workers involved in decommissioning of nuclear power plants, even if all radioactive elements in concrete are not considered.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.4
• /
• pp.237-245
• /
• 2011

As necessity of safety re-evaluation for spent fuel storage facility has emphasized after the Fukushima accident, accuracy improvement of heat load evaluation has become more important to acquire reliable thermal-hydraulic evaluation results. As groundwork, parametric and sensitivity analyses of various storage conditions for Kori Unit 4 spent fuel storage pool and spent fuel depletion parameters such as axial burnup effect, operation history, and specific heat are conducted using ORIGEN2 code. According to heat load evaluation and parametric sensitivity analyses, decay heat of last discharged fuel comprises maximum 80.42% of total heat load of storage facility and there is a negative correlation between effect of depletion parameters and cooling period. It is determined that specific heat is most influential parameter and operation history is secondly influential parameter. And decay heat of just discharged fuel is varied from 0.34 to 1.66 times of average value and decay heat of 1 year cooled fuel is varied from 0.55 to 1.37 times of average value in accordance with change of specific power. Namely depletion parameters can cause large variation in decay heat calculation of short-term cooled fuel. Therefore application of real operation data instead of user selection value is needed to improve evaluation accuracy. It is expected that these results could be used to improve accuracy of heat load assessment and evaluate uncertainty of calculated heat load.

• Nuclear Engineering and Technology
• /
• v.20 no.3
• /
• pp.165-169
• /
• 1988

As a part of tandem fuel cycle feasibility study, the residual U and Pu nuclide contents of PWR spent fuels are computed using ORICEN2 code for each Korea Nuclear Unit and batch to investigate the potential of utilizing them as CANDU fuels. The annual and accumulated discharged amounts of U and Pu nuclides are computed for the PWRs from KNU 1 through KNU 10. The results of computation show that the spent fuels having 0.7-0.8 w/o U-235 are dominant and considerable amounts of fissile Pu are produced. The enrichment of U-235 is less than the expected 0.8-0.9 w/o U-235 since the burnups offered by KEPCO are higher than those of other PWRs.