• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.316-317
• /
• 2004

사용후핵연료를 이용한 건식 핵연료 원격 제조 공정중 OREOX공정으로부터 핵분열기체 방출특성 평가를 위한 실험을 수행하였다. 사용후핵연료 분말화 공정인 1차 산화 및 OREOX공정에서 방출되는 핵분열기체를 실시간으로 측정할 수 있는 장치를 제작$\cdot$설치하였으며, 측정 대상 핵분열기체는 Kr-85를 포함하여 C-14$^{14}CO_2$ 형태), I-129, 기체상 트리튬 등이다. 그림 1은 방출되는 핵분열기체를 포집 또는 연속측정하기 위한 개념도이며, 그림 2는 핫셀구역에 설치된 장치 사진이다.(중략)

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.39-52
• /
• 2007

Quantitative analysis on release behavior of the $^{85}Kr\;and\;^{14}C$ fission gases from the spent fuel material during the voloxidation and OREOX process has been performed. This thermal treatment step in a remote fabrication process to fabricate the dry-processed fuel from spent fuel has been used to obtain a fine powder The fractional release percent of fission gases from spent fuel materials with burn-up ranges from 27,000 MWd/tU to 65,000 MWd/tU have been evaluated by comparing the measured data with these initial inventories calculated by ORIGEN code. The release characteristics of $^{85}Kr\;and\;^{14}C$ fission gases during the voloxidation process at $500^{\circ}C$ seem to be closely linked to the degree of conversion efficiency of $UO_2\;to\;U_3O_8$ powder, and it is thus interpreted that the release from grain-boundary would be dominated during this step. The high release fraction of the fission gas from an oxidized powder during the OREOX process would be due to increase both in the gas diffusion at a temperature of $500^{\circ}C$ in a reduction step and in U atom mobility by the reduction. Therefore, it is believed that the fission gases release inventories in the OREOX step come from the inter-grain and inter-grain on $UO_2$ matrix. It is shown that the release fraction of $^{85}Kr\;and\;^{14}C$ fission gases during the voloxidation step would be increased as fuel burn-up increases, ranging from 6 to 12%, and a residual fission gas would completely be removed during the OREOX step. It seems that more effective treatment conditions for a removal of volatile fission gas are of powder formation by the oxidation in advance than the reduction of spent fuel at the higher temperature.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2003.10a
• /
• pp.112-115
• /
• 2003

• Journal of Powder Materials
• /
• v.7 no.3
• /
• pp.123-130
• /
• 2000

The simulated DUPIC fuel provides a convenient way to investigate fuel properties and behaviours such as thermal conductivity, thermal expansion, fission gas release, leaching and so on. Several pellets simulating the composition and microstructure of the DUPIC fuel were fabricated from resintering powder through the OREOX process of the simulated spent fuel pellets, which were prepared from the mixture of stable forms of constituent nuclides. This study describes the powder treatment, OREOX, compaction and sintering to fabricate simulated DUPIC fuel using the simulated spent fuel. The homogeneity of additives in the powder was observed after attrition milling. The microstructure of the simulated spent fuel was in agreement with the previous studies. The densities and the grain size of simulated DUPIC fuel was pellets are higher than those of simulated spent fuel pellets. Small metallic precipitates and oxide precipitates were observed on matrix grain boundaries.

• Resources Recycling
• /
• v.11 no.4
• /
• pp.3-10
• /
• 2002

The characteristics of dry and wet milled powder prepared by 1 cycle OREOX (oxidation and reduction of oxide fuels) treatment were investigated using the simulated spent fuel pellet. Sintered pellets simulating spent nuclear fuel burned in reactor were fabricated from $UO_2$ powder using as a starting material in fabrication of nuclear fuel. The 1 cycle OREOX-treated powder was prepared by only one path of oxidation md reduction of the simulated pellet. Powder having average particle size of less than 1 $\mu\textrm{m}$ could be easily obtained by dry milling, but not be achieved by wet milling. And, specific surface area of dry milled pow-der was higher than that of wet milled powder. Dry milled powder formed loose agglomerate, while wet milled powder showed the shape of irregular and angular particles. Dry milled powder provided higher green density, resulting in higher sintered density of higher than 95% TD and average grain size of larger than 8 $\mu\textrm{m}$ satisfying the standard specification of sintered pellets.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.371-372
• /
• 2005

• Nuclear Engineering and Technology
• /
• v.40 no.3
• /
• pp.191-198
• /
• 2008

The influence of fission products' contents on the DUPIC fuel powder and pellet properties was experimentally evaluated using SIMFUEL as a surrogate for actual spent PWR fuel due to the high radioactivity of spent fuel. Pure $UO_2$ and SIMFUEL pellets with fission products equivalent to a burn-up of 35,000 MWd/tU and 60,000 MWd/tU were used as impurities in this study. The specific surface area of the powder milled after the OREOX treatment increased and resulted in sintered pellets with a theoretical density (TD) higher than 95%, regardless of the impurity contents. However, the grain size of the sintered pellets decreased with the increasing impurity contents. As a result of the dissolved oxides in $UO_2$ from the impurity groups, the specific surface area of the OREOX powder increased with an increase of the impurities. The grain size of the sintered pellets was significantly decreased by the metallic and oxide precipitates.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.772-773
• /
• 2004

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.860-865
• /
• 1995

산화.환원공정(OREOX)중 준휘발성 루데늄 산화물들을 포집하고 차후 고화 처리시 높은 온도(-110$0^{\circ}C$)에서도 안정한 화합물을 형성할 수 있는 최적의 포집재를 얻고자 하였다. 먼저 루데늄 포집재를 분석하였으며, 또한 열적으로 안정한 루데늄 화합물을 조사하여 각각에 대한 포집특성을 TG-DTA 및 XRD로 분석하였다. 이에 따르면 루테늄 포집재로 알려진 알루미나, 철과 티타늄 산화물 또는 이들 혼합물들은 100$0^{\circ}C$ 이상에서는 루데늄이 전량 휘발되었고, BaCO$_3$는 열적 안정성이 우수하지만, 화합물 생성 반응시 $CO_2$(g)가 발생한다는 단점이 있다. 따라서, 이론적 포집능이 크고 부산물이 발생되지 않는 $Y_2$O$_3$와 Li$_2$O를 적합한 루데늄 포집재로 제안하였다.

• Nuclear Engineering and Technology
• /
• v.38 no.4
• /
• pp.359-374
• /
• 2006

Since 1991, Korea, Canada and United States have performed the direct use of spent pressurized water reactor (PWR) fuel in the Canada deuterium uranium (CANDU) reactors (DUPIC) fuel development project. Unlike the Tandem fuel cycle, which requires a wet reprocessing, the DUPIC fuel technology can directly refabricate CANDU fuels from the PWR spent fuel and, therefore, is recognized as a highly proliferation-resistant fuel cycle technology, which can be adopted even in non-proliferation treaty countries. The Korea Atomic Energy Research Institute (KAERI) has fabricated DUPIC fuel elements in a laboratory-scale remote fuel fabrication facility. KAERI has demonstrated the fuel performance in the research reactor, and has confirmed the operational feasibility and safety of a CANDU reactor loaded with the DUPIC fuel using conventional design and analysis tools, which will be the foundation of the future practical and commercial uses of DUPIC fuel.