• Title/Summary/Keyword: OQPSK

Search Result 29, Processing Time 0.028 seconds

Low Complexity Linear Receiver Implementation of SOQPSK-TG Signal Using the Cross-correlated Trellis-Coded Quadrature Modulation(XTCQM) Technique (SOQPSK-TG 신호의 교차상관 격자부호화 직교변조(XTCQM) 기법을 사용한 저복잡도 선형 수신기 구현)

  • Kim, KyunHoi;Eun, Changsoo
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.50 no.3
    • /
    • pp.193-201
    • /
    • 2022
  • SOQPSK-TG is a modulated signal for aircraft telemetry with excellent frequency efficiency and power efficiency. In this paper, the phase waveform of the partial response SOQPSK-TG modulation is linearly approximated and modeled as a full response double duobinary SOQPSK (SOQPSK-DD) signal. And using the XTCQM method and the Laurent decomposition method, the SOQPSK-DD signal was approximated as OQPSK having linear pulse waveforms, and the results of the two methods were proved to be the same. In addition, it was confirmed that the Laurent decomposition waveform of the SOQPSK-DD signal approximates the Laurent decomposition waveform of the original SOQPSK-TG signal. And it was shown that the decision feedback IQ-detector, which applied the Laurent decomposition waveform of SOQPSK-DD to the detection filter, exhibits almost the same performance even with a simpler waveform than before.

The Advanced SNR Performance analysis for DS-CDMA Communication System (DS-CDMA 통신시스템 기반에서의 새로운 SNR 성능평가)

  • Jeong, Ke-Hon;Kim, Sung-Soo
    • Proceedings of the KIEE Conference
    • /
    • 2004.07d
    • /
    • pp.2559-2561
    • /
    • 2004
  • This paper proposes the new signal-to-noise ratio(SNR) that is different from the conventional signal-to-noise ratio (SNR) in direct-sequence code-division multiple-access communication system employing offset quadrature phase-shift keying(OQPSK) and using a chip waveform. The conventional SNR value is so different from a real SNR value. Therefore, we propose a new SNR equation approximated to real SNR. The multiple-access interference(MAI) in DS-CDMA communication system has an effect on SNR performance and MAI is concerned with the correlation functions of the chip waveform. For this reason, we considered all possible correlations of chip waveforms. In conclusion, the SNR value of proposed method is enclosed to the real SNR value.

  • PDF

Signal Space Representation of Half-Symbol-Rate-Carrier PSK Modulations

  • Yeo, Hyeop-Goo
    • Journal of information and communication convergence engineering
    • /
    • v.7 no.3
    • /
    • pp.304-308
    • /
    • 2009
  • This paper proposes a new concept of a signal constellation of the recently introduced half-symbol-rate-carrier phase-shift keying (HSRC-PSK) modulations for bandwidth-efficient high speed data communications. Since the HSRC-PSK modulations contain different symbol energies representing the same bit sequences due to the loss of orthogonality of their HSRC signals, it is very hard to represent the symbol using the conventional signal constellation. To resolve the problem, two different energies are assigned to represent one symbol for the HSRC offset quadrature phase shift keying (OQPSK) modulation. Similarly, the different energies exist to display the different symbol for HSRC minimum shift keying (MSK) modulation. With the proposed signal space representation, HSRC-PSK symbol can easily be shown with a two-dimensional scatter plot which provides helpful information of evaluating HSRC-PSK signal's quality.

Performance Comparison for MODEM in MUltipath Fading Channel (다중경로 페이딩 채널에서의 변복조 성능비교)

  • 전동근;박형근;이연우
    • The Journal of the Acoustical Society of Korea
    • /
    • v.17 no.4
    • /
    • pp.28-34
    • /
    • 1998
  • 미래 개인 휴대통신에서는 고속의 데이터 서비스를 위하여 높은 대역폭 효율을 요 구하게 된다. 무선통신 서비스를 향상시키기 위하여 코딩기법, 변조기법, 다중화기법 등의 다양한 방법이 연구되고 있다. 이중에서 특히 변조기법은 시스템의 성능을 결정하는 중요한 요소가 된다. 본 논문에서는 PSK. OQPSK, π/4 DQPSK, MSK, GMSK의 다섯가지 변조기 법에대한 BER성능을 시뮬레이션하였다. 시뮬레이션을 위한 다중경로 페이딩채널로서 3가지 서로 다른 채널을 적용하였다. 이때 시뮬레이션을 위하여 1.544Mbps의 전송속도와 1.9GHz 의 반성주파수 환경을 고려하였다. 또한 fractional 선형 등화기를 적용하여 변조방식에 따른 성능향상 정도를 비교하였다. 채널 Ⅰ, Ⅱ, Ⅲ에 대해 각각 30dB, 20dB, 10dB 정도에서 error floor현상이 발생했으며 π/4 DQPSKS가 가장 낮은 BER 특성을 보인 반면 QPSK는 가장 높은 BER을 나타냈다. 등화기를 적용했을 때는 GMSK의 성능향상이 가장 크게 나타 났다.

  • PDF

Study on the Diversity Method to Improve the Performance of the CDMA System in the Mobile Wireless Channel

  • Lee Kwan-Houng
    • Journal of information and communication convergence engineering
    • /
    • v.3 no.1
    • /
    • pp.1-4
    • /
    • 2005
  • This study proposes a new diversity algorithm to improve the signal-to-noise ratio. In the wireless channel, if fading occurs due to the multipaths, the performance of the system is apparently reduced. One of the methods to reduce fadings like this is the diversity method, and this study aims to improve the performance of the system by proposing a new diversity algorithm. This study applied rake receiver, and normalized the wireless channel from the Nakagami fading channel to the Rayleigh fading channel, which set the fading index as 1, because of the multipaths. It applied QPSK and OQPSK modulation methods and applied the convolutional codes, where the code rate is 1/2 and 1/3 and the constraint length is 9, and the turbo code where the constraint length is 4. Under these conditions, this study compared and analyzed the average error probability of direct spread multiple access system. The diversity algorithm proposed in this paper could be applied to the mobile communication and other wireless multimedia communications that require high quality and high reliability.

Analysis of CDMA System Performance Using Weighted Value of Array Antenna

  • Lee Kwan-Houng
    • Journal of information and communication convergence engineering
    • /
    • v.3 no.2
    • /
    • pp.67-71
    • /
    • 2005
  • Interference occurs by signals received from directions that were different from the signals of the users in a mobile communication system. Various studies have been undertaken, including diversity, equalizer, etc., in order to reduce interference. In this study, the weighted value of the array antenna was obtained to improve signal-to-noise ratio. The weighted value was obtained as an eigen value and an eigen vector by using the correlation coefficient of the signal. The weighted value obtained was then applied to the CDMA system to increase system performance and capacity. Both QPSK and OQPSK modulation systems were applied to analyze performance.

The Design and Performance Analysis of Synchronization on Frequency Hopping Network Communication System (주파수도약 네트워크 통신 시스템의 구조설계 및 동기성능 분석)

  • Lim, So-Jin;Bae, Suk-Neung;Han, Sung-Woo
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.16 no.6
    • /
    • pp.819-827
    • /
    • 2013
  • Compared to legacy frequency hopping communications, future radio communications are required the secure and high data rate, ad-hoc network communication. In this paper, we have designed the network communication structure on the frequency hopping mode, and analyzed the performance of synchronization on the frequency hopping network radio systems. The design results are shown the initial sync. phase of approximately 9 hops and the traffic packet phase of approximately 30 hops. Also, we have simulated the performance on the communication conditions which are carrier bandwidth of 50kHz, user data rate of 64kbps and OQPSK modulation scheme in AWGN. In the simulation, we analyzed the correlation and the performance of synchronization success. The result of simulation show 99% probability for synchronization success at $E_b/N_o$ -4dB.

The Ground Interface Concept of the KOMPSAT-II DLS

  • Lee, Sang-Taek;Lee, Sang-Gyu;Lee, Jong-Tae;Youn, Heong-Sik
    • Proceedings of the KSRS Conference
    • /
    • 2002.10a
    • /
    • pp.228-228
    • /
    • 2002
  • The DLS(Data Link System) is located in the PDTS(Payload Data Transmission Subsystem) of KOMPSAT-II, and its main function is to provide communication link with Ground Segment as a space segment. DLS receive the data of MSC, OBC from DCSU(Data Compression Storage Unit) and transmit to the Ground Station by X-Band RF link. DLS is consist of CCU(Channel Coding Unit), QTX(QPSK Transmitter, ASU(Antenna Switch Unit) CCU makes a packet for communication after several kind of data processing such like Ciphering, RS Coding. QTX transmit PDTS data by OQPSK. Modulation. ASU is the unit for reliability of antenna switching. So, DLS's function is consists of ciphering, RS coding, CCSDS packetizing, randomizing, modulation and switching to antenna. These DLS's functions are controlled by PMU(Payload Management Unit). All commands to DLS are sent by PMU and all telemetries of DLS are sent to the PMU. The PMU receives commands from OBC and sends telemetries to the OBC. The OBC communicates with Ground Station by S-Band RF link. This paper presents the on-orbit DLS operation concept through the ground segment.

  • PDF

Design of a convolutional encoder and viterbi cecoder ASIC for continuous and burst mode communications (연속 및 버스트모드 통신을 위한 길쌈부호기와 비터비복호기 ASIC 설계)

  • 장대익;김대영
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.21 no.4
    • /
    • pp.984-995
    • /
    • 1996
  • Data errors according to the various noises caused in the satellite communication links are corrected by the Viterbi decoding algorithm which has extreme error correcting capability. In this paper, we designed and implemented a convolutional encoder and Viterbi decoder ASIC which is used to encode the input data at the transmit side and correct the errors of the received data at the receive side for use in the VSAT communication system. And this chip may be used in any BPSK, QPSK, or OQPSK transmission system. The ambiguity resolver corrects PSK modem ambiguities by delaying, interting, and/or exchanging code symbol to restore their original sequence and polarity. In case of previous decoding system, ambiguity state(AS) of data is resolved by external control logic and extra redundancy data are needed to resolve AS. But, by adopting decoder proposed in this paper, As of data is resolved automatically by internal logic of decoder in case of continuous mode, and by external As line withoug extra redudancy data in burst mode case. So, decoding parts are simple in continuous mode and transmission efficiency is increased in bust mode. The features of this chip are full duplex operation with independent transmit and receive control and clocks, start/stop inputs for use in burst mode systems, loopback function to verify encoder and decoder, and internal or external control to resolve ambinguity state. For verification of the function and performance of a fabricated ASIC chip, we equiped this chip in the Central and Remote Earth Station of VSAT system, and did the performance test using the commerical INTELSAT VII under the real satellite link environmens. The results of test were demonstrated the superiority of performance.

  • PDF