• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.1
• /
• pp.63-74
• /
• 2011

LED design works make user experience the conditions of time and space, and enable maximized spatial exploration and pursuit of ultimate sources. Light itself includes an ample dimension of time and, through the process of on and off, time-duration, similarity, and discontinuation is reorganized. LED design works make people experience the conditions of time and space, and enable maximized spatial exploration and pursuit of ultimate sources. LED design have been approached more from the viewpoint of material than from the viewpoint of aesthetics. LED based environmental design will be embedded deeply into our life with the technology of ubiquitous city. As the problem of the light intensity, tempo of change LED motion graphic and colors, substitutability is almost completely resolved now, LED is have more potentials than any other material as a tool of motion graphic. These result well make that using of LED is could be better useful from now on. In edition, users could be offered better beneficial lighting environment, and they will enjoy their better lives in the future.

• Journal of Communications and Networks
• /
• v.4 no.2
• /
• pp.128-135
• /
• 2002

We propose a new space priority mechanism, and analyze its performance in a single Constant Bit Rate (CBR) server. The arrival process is derived from the superposition of two types of traffics, each in turn results from the superposition of homogeneous ON-OFF sources that can be approximated by means of a two-state Markov Modulated Poisson Process (MMPP). The buffer mechanism enables the Asynchronous Transfer Mode (ATM) layer to adapt the quality of the cell transfer to the Quality of Service (QoS) requirements and to improve the utilization of network resources. This is achieved by "Selective-Delaying and Pushing-ln"(SDPI) cells according to the class they belong to. The scheme is applicable to schedule delay-tolerant non-real time traffic and delay-sensitive real time traffic. Analytical expressions for various performance parameters and numerical results are obtained. Simulation results in term of cell loss probability conform with our numerical analysis.

• Journal of Mushroom
• /
• v.16 no.4
• /
• pp.331-333
• /
• 2018

The incorporation of Shiitake culture into sawdust is a widely utilized technique that can assist in reducing the cost and time consumption associated with oak cultivation. In sawdust cultivation, browning of the surface mycelia is an important stage with respect to the utility and longevity of the sawdust media. Surface browning forms a protective coating on the substrate, which can inhibit the invasion of pathogens and suppress water evaporation. Several different light sources (red LED, white LED, blue LED, and fluorescent light) were used and the intensity of illumination was carefully controlled (1.5, 10.5, $20.5{\mu}mol/m^2s$ for LEDs and 10, 100, 300 lux for the fluorescent light) to induce browning. The light sources were regulated via a 1 h on/off cycle in a controlled room environment at a temperature of $20^{\circ}C$, 60% humidity, and 1200 ppm $CO_2$ concentration for 60days. The browning effect varied depending on the source and the intensity of illumination. This effect was most effectively induced at $1.5{\mu}mol/m^2s$ for the red and blue LEDs. All light sources induced less browning at the highest intensity of illumination. This indicates that intensity values higher than $20.5{\mu}mol/m^2s$ in the case of the LEDs and 300 lux for the fluorescent light are not effective. After harvesting of the fruit bodies, we measured the weight, length, and width of the pileus and stipe in addition to their chromaticity and hardness. Treatment with $1.5{\mu}mol/m^2s$ blue LED produced the best harvest with the highest average chromaticity, weight (21.2 g), stipe length (30.8 mm), and hardness (377.9 g), with a fine length and width of the pileus.

• ETRI Journal
• /
• v.22 no.2
• /
• pp.11-19
• /
• 2000

If the right and left signals of a binaural sound recording are reproduced through loudspeakers instead of a headphone, they are inevitably mixed during their transmission to the ears of the listener. This degrades the desired realism in the sound reproduction system, which is commonly called 'cross-talk.' A 'cross-talk canceler' that filters binaural signals before they are sent to the sound sources is needed to prevent cross-talk. A cross-talk canceler equalizes the resulting sound around the listener's ears as if the original binaural signal sound is reproduced next to the ears of listener. A cross-talk canceler is also a solution to the problem-how binaural sound is distributed to more than 2 channels that drive sound sources. This paper presents an effective way of building a cross-talk canceler in which geometric information, including locations of the listener and multiple loudspeakers, is divided into angular information and distance information. The presented method makes a database in an off-line way using an adaptive filtering technique and Head Related Transfer Functions. Though the database is mainly concerned about the situation where loudspeakers are located on a standard radius from the listener, it can be used for general radius cases after a distance compensation process, which requires a small amount of computation. Issues related to inverting a system to build a cross-talk canceler are discussed and numerical results explaining the preferred configuration of a sound reproduction system for stereo loudspeakers are presented.

• Journal of Digital Contents Society
• /
• v.13 no.3
• /
• pp.271-278
• /
• 2012

Recently, infrared (IR)-based depth sensors have proliferated as consumer electronics thanks to decreased price, which led to various applications including gesture recognition in television virtual studios. However, the depth sensors fail to capture depth information correctly under strong light conditions emitting infrared light which are very common in television studios. This paper analyzes the mechanism of such interference between the depth sensors relying on certain IR frequencies and infrared light emitting sources, and provides methods to get correct depth information by applying filters. Also, it describes experiment methods and presents the results of applying multiple combinations of filters with different cut-off frequencies. Finally, it proves that the interference due to IR can be filtered out using proposed filtering method practically by experiment.

• Journal of electromagnetic engineering and science
• /
• v.17 no.4
• /
• pp.169-177
• /
• 2017

The role of electromagnetic (EM) waves in magnetic fusion plasma-ranging from radio frequency (RF) to microwaves-has been extremely important, and understanding of EM wave propagation and related technology in this field has significantly advanced magnetic fusion plasma research. Auxiliary heating and current drive systems, aided by various forms of high-power RF and microwave sources, have contributed to achieving the required steady-state operation of plasmas with high temperatures (i.e., up to approximately 10 keV; 1 eV=10000 K) that are suitable for future fusion reactors. Here, various resonance values and cut-off characteristics of wave propagation in plasmas with a nonuniform magnetic field are used to optimize the efficiency of heating and current drive systems. In diagnostic applications, passive emissions and active sources in this frequency range are used to measure plasma parameters and dynamics; in particular, measurements of electron cyclotron emissions (ECEs) provide profile information regarding electron temperature. Recent developments in state-of-the-art 2D microwave imaging systems that measure fluctuations in electron temperature and density are largely based on ECE. The scattering process, phase delays, reflection/diffraction, and the polarization of actively launched EM waves provide us with the physics of magnetohydrodynamic instabilities and transport physics.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.2
• /
• pp.1-7
• /
• 2021

A computer simulation was performed to study the effectiveness of temperature on the type of laser heat source in the context of the heterogeneous welding of aluminum and copper materials. Three different types of heat sources were used in the computer simulation: 1) Single Beam Straight Scan, 2) Single Beam Wobble Scan, and 3) Dual Beam Straight Scan. Among these sources, dual beam straight scan was found to be the most effective from the viewpoint of heat source control. Because the difference between the melting temperatures of copper and aluminum is approximately 400℃, a clear separation of heating temperature was required, and the dual beam straight scan provided superior controllability in this regard. When using the dual beam, the temperature of the 90:10 split was considerably easier to control than that of the 50:50 split. The optimal offset was calculated to be 4 mm off to the copper side, where the melting temperature and thermal conductivity were higher. In this manner, computer simulation was effectively used for determining the optimal laser beam hear source control without performing an actual laser welding experiment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.10
• /
• pp.1706-1711
• /
• 2016

Electromagnetic wave simulation was performed to predict characteristics of manufactured cutoff probe at low temperature magnetized plasma medium. Microwave cutoff probe is designed for research the properties of magnetized inductively coupled plasma. It was shown that the cutoff probe method can safely be used for weakly magnetized high density plasma sources. Cutoff probe system with two port network analyzer has been prepared and applied to measure electron density distributions in large area, 13.56MHz driven weakly magnetized inductively coupled plasma source. The results shown that, the plasma frequency confirmed cut-off characteristics in low temperature plasma. Especially, cut-off characteristics was found at upper hybrid resonance frequency in the environment of the magnetic field. In case of a induced weak magnetic field in inductively coupled plasma, plasma density estimated from the cutoff frequency in the same way at unmagnetized plasma due to nearly same plasma frequency and upper hybrid resonance frequency. The plasma density is increased and uniformity is improved by applying a induced weak magnetic field in inductively coupled plasma.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.56.4-57
• /
• 2017

The Schwarzschild-Chang off-axis telescope is a "linear astigmatism-free" confocal system. The telescope comprises two pieces of aluminum-alloy freeform mirrors that are fabricated with diamond turning machine (DTM) process. We designed optomechanical structures where optical components in the telescope system can be adjustable on a linear stage. Optomechanical deformation caused by the weight of system itself and its temperature variation is analyzed by the finite element analysis (FEA). The results show that the deformation is estimated in the tolerance range. For the optic-axis alignment of telescope system, three-point alignment (TPA) method is chosen. The TPA method uses three parallel lasers and a plane mirror. Point source images were taken from collimated light and field observation. The performance of optical system was tested by point spread function and aberration measurement of the point sources.

• New & Renewable Energy
• /
• v.10 no.1
• /
• pp.6-19
• /
• 2014

Organic Rankine cycle (ORC) has been widely used to convert renewable energy such as solar energy, geothermal energy, or waste energy etc., to electric power. For a small scale output power less than 10 kW, turbo-expander is not widely used than positive displacement expander. However, the turbo-expander has merits that it can operate well at off-design points. Usually, the available thermal energy for a small scale ORC is not supplied continuously. So, the mass flowrate should be adjusted in the expander to maintain the cycle. In this study, nozzles was adopted as stator to control the mass flowrate, and radial-type turbine was used as expander. The turbine operated at partial admission. R245fa was adopted as working fluid, and supersonic nozzle was designed to get the supersonic flow at the nozzle exit. When the inlet operating condition of the working fluid was varied corresponding to the fluctuation of the available thermal energy, optimal operating condition was investigated at off-design due to the variation of mass flowrate.