• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.99-100
• /
• 2002

Radial, tilting-pad proceeding bearings are applied in high speed rotating machines operating at stable small and mean loads and the peripheral speeds of proceeding reaching 150 m/s. The operation of bearing can be determined by static characteristics including the oil film pressure, temperature and viscosity distributions, minimum oil film thickness, load capacity, power loss, oil flow. The operation of 5-lobe tilted-pad proceeding bearing has been introduced at the assumption of adiabatic oil film. The oil film pressure, temperature and viscosity distributions habe received by iterative solution of the Reynolds', energy and viscosity equations. The resulting oil film force, minimum oil film thickness, power loss. oil flow, maximum oil film pressure, maximum temperature were computed for different sets of bearing geometric parameters as: bearing length to diameter ratio, pad angular length and width as well as pad relative clearance.

• Journal of Navigation and Port Research
• /
• v.35 no.9
• /
• pp.765-776
• /
• 2011

For container shipping company, fuel oil prise is a considerable expense. Since 2008, fuel oil prises have risen dramatically. An increasing fuel oil price in container shipping, in the short term, is only partially compensated through surcharges and may affect earnings negatively. This study discusses the impact of an increasing fuel oil price and capital costs for vessels on the Asia-Europe trade of 'H' Shipping Company. According to the result of 'H' carrier's operation in 2008, there were no cost differences between 8 and 9 vessels operations in case of fuel oil price with USD 169/tons while adopting USD 31,818 as a fixed cost. We can expect that the fuel oil price will not go lower than USD 200/Ton on the basis of current high oil price phenomenon. When the fuel oil price is over USD 200/ton, 9 vessel operation is more economic than 8 vessel operation even if the fixed cost is over USD 35,000.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.5
• /
• pp.452-458
• /
• 2004

The major cause of compressor failure is the decrease of oil viscosity due to floodback. In most previous researches on the compressor reliability, the relationship between oil circulation rate and performance or oil viscosity has been studied. Another research topic is flow visualization by using a sight glass on the bottom of a compressor sump area and accumulator. Both oil film thickness and oil level through the sight glass should be assessed for compressor reliability if the oil content of the mixture is small and low viscosity raise poor lubrication of pump bearing. In this study, the compressor reliability was assessed by measuring the viscosity of the mixture and calculating oil film thickness. The analysis of the relationship between bottom shell super heat and oil film thickness at heating operation was peformed. It is concluded that bottom shell superheat does not perfectly stand for the mixture's behavior for a low ambient heating operation and oil film thickness can give more detailed and direct criteria for compressor reliability.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.1
• /
• pp.73-79
• /
• 2011

A portion of oil for lubrication of compressor flows together with refrigerant in the refrigeration system. If the oil discharge from a compressor is increased in the refrigeration system, not only pressure drop is increased in other components, such as evaporator and gas cooler, but also heat transfer coefficient in the heat exchangers is decreased. Oil discharge rate from a compressor may strongly depend on operating conditions of a compressor. In this study, one stage single rotary compressor is employed for measuring oil circulation ratio(OCR). Carbon dioxide and PAG oil are used as refrigerant and lubricant. Using a U-tube densimeter, mixture density is measured. Oil circulation ratio(OCR) can be estimated by measured mixture density. The results obtained indicate that the oil circulation ratio(OCR) is increased as the suction temperature or compressor operating frequency is increased. Oil circulation ratio(OCR) correlation of the compressor is also suggested.

• Tribology and Lubricants
• /
• v.26 no.1
• /
• pp.21-30
• /
• 2010

In this research, it is investigated the collecting efficiency of jet oil to several types of piston oil cooling gallery by using recently developed PCJ (piston cooling jet) rig tester. So it will be selected for a better design of piston oil cooling gallery. The collecting efficiencies at each type of piston cooling galleries are measured under conditions of a few piston positions, and several oil jet pressures and oil viscosities. Furthermore, the type of jet cone will be compared for a few jet pressure conditions. The selected type of piston oil cooling gallery is planned to be applied to the target engine which is now developing to satisfy the EURO VI emission regulation.

• Journal of the Korean Applied Science and Technology
• /
• v.4 no.2
• /
• pp.7-13
• /
• 1987

A preliminary investigation was performed to evaluate the possibility of partially replacing palm oil and beef tallow by rapeseed oil for frying oils of instant Ramyon manufacturing. The AOM stability of rapeseed oil was inferior than of palm oil, but was comparable to that of beef tallow. When rapeseed oil was blended with palm oil or beef tallow, the AOM stability of the blended oil was improved. As far as AOM stability is concerned, best results were obtained with a blending ratio of 3 part of rapeseed oil to 7 part of palm oil and a ratio of 4 part of rapeseed oil to 6 part of beef tallow. These blended rapesee oils was retarded the formation of conjugated dienes and polymers during heating. The antioxidative effects on the stabilities of AOM and thermal in blended rapeseed oils showed that TBHQ was superior to tocopherols and a mixture of BHA and BHT was inferior.

• Journal of the Korean Society of Safety
• /
• v.30 no.2
• /
• pp.83-89
• /
• 2015

In Korea for 20 years(1993-2012), total number and average annual number of oil spills were 6,608 cases and total volume and average annual volume of oils spilt were $57,328k{\ell}$ and nearly $2,866k{\ell}/year$, respectively. The annual number of oil spills and annual amount of oil spilt tended to decrease with the lapse of year in Korea. As oil transportation worldwide continues to increase, many communities are at risk of oil spill disasters and must anticipate and prepare for them. Factors that influence oil spill consequences are myriad and rage from the biophysical to the social. In this paper, we analysed the emergency response systems and recovery apparatuses for oil spill accident in marine and proposed a developed oil diffusion apparatus which can be used to initial response stage by crew, and to extend golden times. This system can be minimized casualties for rescued people in disaster.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.2105-2119
• /
• 2015

This paper reported the experimental result of dielectric properties of Refined, Bleached and Deodorized Palm Oil (RBDPO) combined with 0-50% of Refined, Bleached and Deodorized Soybean Oil (RBDSO). The dielectric strength and relative permittivity of RBDPO/RBDSO was higher compared to mineral oil at all ranges of ratios and temperatures which indicated a positive sign for its possible use as insulating liquid in a transformer. All ratios of the RBDPO/RBDSO mixture also demonstrated lower dissipation factor compared to mineral oil at 40℃, 70℃ and 90℃. Apart from that, the kinematic viscosity for the oil mixtures shown exceeded the IEC 60296 as well as the mineral oil results. 70%RBDPO/30%RBDSO mixture ratio was chosen as the best mixing percentage after comparison was made with the mineral oil and IEC 60296 standard where the mixture accumulated the most satisfactory of dielectric properties hence making it as the potential candidate for palm and soybean-based transformer oil.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.6
• /
• pp.857-862
• /
• 2004

The present study was carried out to examine the changes in functional properties of cholesterol-removed compound whipping cream made by $\beta$-CD treated cream and palm oil. Six different ratios of cream to palm oil (10:0 as control, 9:1, 8:2, 7:3, 6:4, and 5:5, v/v) were tested. The overrun percentage increased with an increased amount of palm oil. When the ratio of cream to palm oil was 10:0 (control), the overrun was 130%, which was significantly lower than other ratios reached to 150%. Foam instability was measured as 3.1 ml defoamed cream in control, however, the value of foam instability decreased with an increase of palm oil addition. The TBA value of cholesterol-removed compound whipping cream increased from 0.08 to 0.13 with no addition of palm oil during 4 wk storage. When the ratio of cream to palm oil was 5:5, TBA value increased dramatically at 3 wk and thereafter. Among sensory characteristics, texture value increased with higher amount of palm oil, however, flavor and overall preferences were opposite. Above results indicated that partial substitution of palm oil in manufacture of cholesterol-removed compound whipping cream resulted in a stable foam development with little adverse effect on flavor and lipid oxidation during storage. The present study showed a possible application in manufacture of cholesterol-removed compound whipping cream, which may be effective in other foods.

• Microbiology and Biotechnology Letters
• /
• v.25 no.5
• /
• pp.520-526
• /
• 1997

Bacterial strains which degrade Arabian Light crude oil were isolated by enrichment culture from oil-spilled soil. The strain A54 was finally selected after testing emulsifying activity and oil conversion rate. Strain A54 was identified as a Acinetobacter sp. based on the morphological, biochemical and physiological characteristics. It appears to be highly specialized for growth on Arabian Light crude oil in minimal salts medium since it showed preference for oil or degradation products as substrates for growth. It was found that it could grow on at least fifteen different hydrocarbons. The optimum cultural and environmental conditions were as follows; 25$\circ$C for temperature, 7,5 for pH, 2.0% for NaCl concentration and 2.0% for crude oil concentration. Additionally, the optimal concentration of NH$_{4}$NO$_{3}$, and K$_{2}$HPO$_{4}$, were 12.5 mM and 0.057 mM, respectively. Cell growth and emulsifying activity as a function of time were also determined. Crude oil degradation and the reduction of product peaks were identified by the analysis of remnant oil by gas chromatography. Approximately 63% of crude oil were converted into a form no longer extractable by mixed organic solvents.