• Clean Technology
• /
• v.11 no.4
• /
• pp.195-204
• /
• 2005

A new condensation process for manufacturing N-acyl taurates which generates less pollutant and produces more than 60 % yield in comparison with the conventional process has been developed in this work. Its optimum process conditions are at $210{\sim}230^{\circ}C$ of reaction temperature and 6 ~ 9 hour of reaction time when Parasol 123 of petroleum refired oil is employed as process solvent and mixed catalysts of sulfonic acid and phosphoric acid are utilized as process catalyst. And the qualities of N-acyl taurates produced by this new process are similar to or better than those of imported product judging from their acid value, amine value and color. Thus, it can be said that the newly developed process for manufacturing N-acyl taurates in this work is better than the conventional process. The physical properties of N-acyl taurates produced in this work such as surface tension, foaming power, foaming stability, hard water stability, and emulsifying power etc. were compared with those of commercially available anionic surfactants. And the experimental results show that N-acyl taurates shows good physical properties and that they can be alternative to conventional anionic surfactants.

• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.640-652
• /
• 1994

This work is undertaken to determine alcohol homologues so-called fusel oil that may be present in the Korean folk sojues (distilled liquor) made from grains and to describe sample preparation and analytical method by GC-FID-MS. Solid phase extraction method for sample preparation by using porous styrene divinyl benzene polymer (Porapak Q) was compared with steam distillation and solvent extraction method. Retention behaviors of homologous series of alcohols were also studied. Log values of retention time, molecular weight, boiling point, and capacity factor of alcohols showed linear correlations to the carbon number of an alcohol, to the oven temperature, and to the dielectric constant. Components such as methyl alcohol, n-propyl alcohol, isobutyl alcohol, isopentyl alcohol, and phenethyl alcohol have been identified. The more amount of isopentyl alcohol than other alcohols are contained in the Korean folk sojues, while that of n-propyl alcohol are contained in Chinese kaoliangchiew. Degree of similarity or dissimilarity and classification of the individual samples were discussed using multivariate statistical analysis(principal components analysis) based on GC data.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.591-598
• /
• 2002

In the ship structural design, the material cost of hull weight and the overall cost of construction processes should be minimized considering safety and reliability. In the past, minimum weight design has been mainly focused on reducing material cost and increasing dead weight reflect the interests of a ship's owner. But, in the past experience, the minimum weight design has been inevitably lead to increasing the construction cost. Therefore, it is necessary that the designer of ship structure should consider both structural weight and construction cost. In this point of view, multi-objective optimization technique is proposed to design the ship structure in this study. According to the proposed algorithm, the results of optimization were compared to the structural design of actual VLCC(Very Large Crude Oil Carrier). Objective functions were weight cost and construction cost of VLCC, and ES(Evolution Strategies), one of the stochastic search methods, was used as an optimization solver. For the scantlings of members and the estimations of objectives, classification rule was adopted for the longitudinal members, and the direct calculation method, GSDM(Generalized Slope Deflection Method), lot the transverse members. To choose the most economical design point among the results of Pareto optimal set, RFR(Required Freight Rate) was evaluated for each Pareto point, and compared to actual ship.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.505-511
• /
• 2006

We tried to prepare polystyrene composite particles containing carbon black by suspension polymerization with water as a reaction medium. Hydrophobic silica was selected as a stabilizer and oil-soluble azobisisobutyronitrile (AIBN), as an initiator. All polymerization reactions were carried out at a fixed temperature of $75^{\circ}C$. Stabilizer concentration was varied from $0.17{\sim}3.33wt%$ compared to water, where particles with $7.96{\mu}m$ in average diameter were obtained at 1.57 wt% of stabilizer. Increase in divinylbenzene concentration, as a crosslinking agent, from $0.1{\sim}1.0 wt%$ compared to monomer exhibited a large increase in average particle diameter Incorporation of 1wt% of carbon black compared to monomer produced an increase in average diameter It is speculated that viscosity lower than that necessary to induce even dispersion of carbon black particles led to poor dispersion, and as a result, large particles. For a styrene mixture containing 3 wt% carton black compared to monomer, enhanced dispersion due to an increase in carbon black concentration reduced average particle diameters. For styrene mixtures containing 1 and 3 wt% carbon black compared to monomer, preparticles before polymerization and polymer composite particles after polymerization showed a similar tendency towards particle formation. When carbon black concentration compared to monomer was increased to 5 and 7 wt%, styrene mixtures exhibited a large increase in viscosity and thus better dispersion of carbon black particles, which led to a decrease in preparticle diameters. However, these particles experienced agglomeration in the polymerization process, and polystyrene composite particles increased in average diameter.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.189-193
• /
• 2007

We developed the doxorubicin-loaded PLGA double-layered microspheres using relatively simple oil-in-water (O/W) solvent evaporation method for sustained release of doxorubicin and investigated the release behavior according to PLGA molecular weight and initial drug loading. The double-layered microsphere was characterized on the surface, the cross-section morphology, the behavior of doxorubicin release for 5 weeks by SEM and fluorescence spectrophotometer. Double-layered microspheres showed smooth surfaces and clear difference between core and outer-shell. As the PLGA molecular weight increased, the release rate of doxorubicin-loaded, double-layered microspheres decreased. These results showed that the release behaviors can be controlled by the variation of molecular weight of PLGA.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.20 no.1
• /
• pp.99-113
• /
• 2007

Purpose : This study was designed to investigate the effects of Jeongkyeong-Tang(JKT) on the polycystic ovary(PCO) induced by estradiol valerate(EV) in rats. Methods : PCO was induced by single intramuscular injection with EV(4mg) in female rats. Normal group(n=8) were injected with sesame oil and orally administrated distilled water for sixty days. PCO control group(n=8) were injected with EV and orally administrated distilled water for sixty days. JKT treated group(n=8) were injected with EV and orally administrated JKT for sixty days. Then we measured weights of body, ovaries and adrenal glands, and measured content of serum estrogen. The histomorphometrical changes of ovaries were also evaluated. The expressions of nerve growth factor(NGF) were analyzed in the central nervous system, adrenal glands and ovaries by immunohistochemistry. Results : - The weights(mg) of ovaries in JKT treated group (69.7${\pm}$6.7) were significantly increased( p<0.001) compared with PCO control group(46.7${\pm}$12.2). - The numbers of secondary follicles in JKT treated group(4.00${\pm}$l.31) were significantly increased(p <0.05) compared with PCO control group(2.25${\pm}$1.39). - The numbers of mature follicles in JKT treated group(5.50${\pm}$1.51) were significantly increased(p<0.01) compared with PCO control group(2.88${\pm}$1.13). - The numbers of atretic follicles in JKT treated group(2.75${\pm}$l.16) were significantly decreased(p<0.001) compared with PCO control group(6.88${\pm}$2.03). - The numbers of corpora lutea in JKT treated group(4.13${\pm}$1.46) were significantly increased(p<0.01) compared with PCO control group(2.13${\pm}$1.46). - The contents(pg/ml) of serum estrogen in JKT treated group(115.18${\pm}$18.29) were significantly decreased(P<0.01) compared with PCO control group(153.06${\pm}$29.47). - The expressions of NGF-immunoreactive cells in the ovarian granulosa cells in JKT treated group were lesser observed than PCO control group. Conclusion : From the above results, we concluded that Jeongkyeong-Tang has inhibitory effect on the development of EV-induced polycystic ovary. And it's effect may be related with decreased NGF activities in the ovary.

• Journal of Veterinary Clinics
• /
• v.20 no.1
• /
• pp.66-73
• /
• 2003

Numerous physiological effects are attributed to conjugated linoleic acid(CLA). The purpose of this study is to consider these effects with respect to the cis-9, trans-11 and trans-10, cis-12 CLA isomer. Both isomers are natural products. The c9,t11-CLA isomer is the principal dietary form of CLA, but the concentrations of this isomer and the t10,c12-CLA Isomer in dairy products or beef vary depending on the diet fed to cows or steers, respectively. The influence of dietary CLA isomers on the immune response was examined, body weight and weight ratio of organ to body of Balb/C mice. Mice were divided into four groups of 8 mice. Balb/C mice were fed the experimental diets supplemented with 1% CLA (c9,t11-CLA isomer : t10,c12-CLA isomer = 2:3) (Group 1), 1% CLA (c9,t11-CLA isomer t10,c12-CLA isomer : 1:1) (Group 2), 1% safflower oil (Group 3) or nothing (Control) for 3 weeks. After 3 weeks, serum, gut lumen lavage, fat, liver, spleen and thymus were taken. Measurement of total immunoglobulin were executed using sandwich ELISA. Serum levels of IgA and IgM showed that group fed with t10,c12-CLA isomer significantly were higher than group fed with c9,tl1-CLA isomer. In addition serum level of IgG showed that group fed with t10,c9-CLA isomer significantly were lower than group fed with c9,tl1-CLA isomer. However, no significantly differences were observed in the serum IgE and secretory IgA. Weight ratio of spleen to body showed no significant differences. In weight ratio of liver and thymus to body, tl0,c9-CLA isomer significantly were respectively higher than group fed with c9,t11-CLA isomer. In weight ratio of fat to body, tl0,c9-CLA isomer significantly were respectively lower than group fed with c9,tl1-CLA isomer. In conclusion, t10,c12-CLA isomer produced a situation favorable for immunopotentiative effect and body composition. But it should be protected against hepatomegaly induced lipid accumulation in liver.

• Korean Journal of Weed Science
• /
• v.30 no.2
• /
• pp.153-163
• /
• 2010

This study was carried out to establish an improved bioassay system, whole-plant bioassay which is more effective in developing natural herbicides for foliar treatment such as herbicidal essential oils. Two bioassay systems using four weed species (Echinochloa crus-galli, Digitaria sanguinalis, Aeschynomene indica, and Abutilon theophrasti), spraying method and spotting method, were established. Spraying method is applicable if the amount of test compounds is enough, while spotting method is useful for the small amount of test compounds. The initial application rate was desirable at $2,500{\sim}5,000\;{\mu}g\;mL^{-1}$. Herbicidal activities were higher in the NOP treatment when compared to the Tween 20 treatment. To efficiently evaluate volatile compounds such as essential oils, if the compound-treated pots were incubated in dew chamber for about 10hrs, better results were obtained in the degree and stability of herbicidal responses. When the efficiency of bioassay systems established in this study was compared, the spraying method was minimized four times to the conventional method that has beed used for screening of synthetic compounds in KRICT. On the other hand, in the spotting method, screening for development of a natural herbicides was possible even in level of 1/100 test volume and 1/200 amounts of test compound compared to the spraying method.

• Journal of Life Science
• /
• v.23 no.10
• /
• pp.1273-1279
• /
• 2013

Aromatic hydrocarbons, such as phenol, have been detected frequently in wastewater, soil, and groundwater because of the extensive use of oil products. Bacterial strains (56 isolates) that degraded phenol were isolated from soil and industrial wastewater contaminated with hydrocarbons. GN13, which showed the best cell growth and phenol degradation, was selected for further analysis. The GN13 isolate was identified as Neisseria sp. based on the results of morphological, physiological, and biochemical taxonomic analyses and designated as Neisseria sp. GN13. The optimum temperature and pH for phenol removal of Neisseria sp. GN13 was $32^{\circ}C$ and 7.0, respectively. The highest cell growth occurred after cultivation for 30 hours in a jar fermentor using optimized medium containing 1,000 mg/l of phenol as the sole carbon source. Phenol was not detected after 27 hours of cultivation. Based on the analysis of catechol dioxygenase, it seemed that catechol was degraded through the meta- and ortho-cleavage pathway. Analysis of the biodegradation of phenol by Neisseria sp. GN13 in artificial wastewater containing phenol showed that the removal rate of phenol was 97% during incubation of 30 hours. The removal rate of total organic carbon (TOC) by Neisseria sp. GN13 and activated sludge was 83% and 78%, respectively. The COD removal rate by Neisseria sp. GN13 from petrochemical wastewater was about 1.3 times higher than that of a control containing only activated sludge.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2498-2508
• /
• 1993

$Al/SiC/Al_{2}O_{3}$ hybrid composites are fabricated by squeeze infiltration method. From the misconstructive of $Al/SiC/Al_{2}O_{3}$ hybrid composites fabricated by squeeze infiltration method, uniform distribution of reinforcements and good bondings are found. Hardness value of $Al/SiC/Al_{2}O_{3}$ hybrid composites increases linearly with the volume fraction of reinforcement because SiC whisker and $Al_{2}$O$_{3}$ fiber have an outstanding hardness. Optimal aging conditions are obtained by examining the hardness of $Al/SiC/Al_{2}O_{3}$ hybrid composites with different aging time. Tensile properties such as Young's modulus and ultimate tensile strength are improved up to 30% and 40% by the addition of reinforcements, respectively. Failure mode of $Al/SiC/Al_{2}O_{3}$ hybrid composites is ductile on microstructural level. Through the abrasive wear test and wear surface analysis, wear behaviour and mechanism of 6061 aluminum and $Al/SiC/Al_{2}O_{3}$ hybrid composites are characterized under various testing conditions. The addition of SiC whisker to $Al/SiC/Al_{2}O_{3}$ composites gives rise to improvement of the wear resistance. The wear resistance of $Al/SiC/Al_{2}O_{3}$ hybrid composites is superior to that of Al/SiC composites. The wear mechanism of aluminum alloy is mainly abrasive wear at low speed range and adhesive and melt wear at high speed range. In contrast, that of $Al/SiC/Al_{2}O_{3}$ hybrid composites is abrasive wear at all speed range, but severe wear when counter material is stainless steel. As the testing temperature increases, wear loss of aluminum alloy decreases because the matrix is getting more ductile, but that of $Al/SiC/Al_{2}O_{3}$ hybrid composites is hardly varied. Oil lubricant is more effective to reduce the wear loss of aluminum alloy and $Al/SiC/Al_{2}O_{3}$ hybrid composites at high speed range.