• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 추계 학술대회논문집
• /
• pp.153-159
• /
• 1998

The Newton-Krylov method on the unstructured grid flow solver using the cell-centered spatial discretization oi compressible Euler equations is presented. This flow solver uses the reconstructed primitive variables to get the higher order solutions. To get the quadratic convergence of Newton method with this solver, the careful linearization of face flux is performed with the reconstructed flow variables. The GMRES method is used to solve large sparse matrix and to improve the performance ILU preconditioner is adopted and vectorized with level scheduling algorithm. To get the quadratic convergence with the higher order schemes and to reduce the memory storage. the matrix-free implementation and Barth's matrix-vector method are implemented and compared with the traditional matrix-vector method. The convergence and computing times are compared with each other.

• 한국공작기계학회논문집
• /
• 제11권1호
• /
• pp.10-16
• /
• 2002

This study is to evaluate the tool performance in honing using diamond reamer and present grounds whether the localized products are sufficiently competitive comparing with the existing imported ones. The heads of the tool performance evaluation are roundness, roughness, tool life of the workpiece and so on. When evaluating the tool performance, cutting process is divided by three areas which are rough semi-finish and finish cut. cloning improves the accuracy such as boring and reaming after manufacturing the inside diameter, and finishing directly by honing is a recent trend. This honing is used greatly In hard cutting materials like cemented carbides and it is the CBN and diamond that is used in hard cutting materials. Both of them are expensive and most oi them are imported.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.79-82
• /
• 2002

Three-dimensional pipe flows with elbows and tees for few different pipe fittings are calculated to estimate the effect of swirling flow on measuring accuracy of orifice flow meter. It is evaluated how the pressure difference across the orifice is dependent on the length of upstream straight pipe in a branch and how swirl intensity, swirl angel and axial velocity distribution affect the measuring error of orifice flowmeter. From the results, it is found that, regardless of flow rate specified in this calculation, the effect of the straight pipe length can be neglected for the lengths larger than thirty diameters although there still remain significant swirl at the orifice

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.317-318
• /
• 2006

The towfish oi a side scan sonar is an equipment that search images of the bottom surface of the sea in real time. It is a typical equipment that is related to a sea investigation such as a geological survey, seabed communication cable and power line cable placing repair investigation, fish breeding ground investigation, sea purification, relic and mineral investigation, and mine and submarine search. It used to find objects and Investigate on the seabed surface. But, recently, it is used to sea purification and geological survey that require information of the correct surface of the seabed. So, it needs various filtering technique and image processing techniques development to acquire high resolution image. Therefore, this research develops a side scan sonar using multi-beam sensors that supply various information with the fast scan speed and correct high resolution that is not a simple underwater investigation equipment.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.691-692
• /
• 2001

Until tile 1980s, the disposal of End of Life Vehicles (ELV) was considered unproblematic in Japan, Korea. and Taiwan. But in recent years, as environmental problems have attracted increasing attention. the processing oi ELV has become one of the most critical environmental issues. Discarded ELV represent a serious source of waste generation and pollution. In this paper, I will analyze the ELV problem from three view points: 1) ELV abandoned in the environment; 2) Significant environmental hazards caused by dismantling operations; and 3) Problems of how to deal with Automobile Shredder Residue (ASR).

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.734-737
• /
• 2001

A study was conducted in order to remove PVC from the waste plastic film mixture. The fittings of Air Table was modified to increase the separation efficiency of PVC. By using the improved air table, the PE and PVC was successfully separated from PVC-PE film mixture with the yield of PE 90% or more and with the content of PVC in PE 1% or less. The detail of the separation condition and result will be discussed in this paper.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.320-328
• /
• 2001

Base Isolation system is an effective design strategy that provides a practical substitute for the seismic design of bridge. In this study, the dynamic tests were performed on two kinds of aseismic bridge bearings : Hydampot (hysteretic damping bearing) and Dynapot . Then, the dynamic analysis was carried out far a bridge using the experimental results to estimate the seismic performance of the bearings. Analysis was performed for four types oi earthquake loadings. The results of the dynamic test and theoretical analysis indicate that the performance of both bridge bearings is appropriate fur the earthquake loading.

• 대한세포병리학회지
• /
• 제10권2호
• /
• pp.191-195
• /
• 1999

Pigmented villonodular synovitis is a destructive, fibrohistiocytic proliferation producing innumerable villous and nodular synovial protrusions. Its common locations are knee, ankle, foot, and hip. Although histologic feature of this tumor is well known, there have been few reports on the fine needle aspiration cytology findings. We report the cytologic features of a biopsy-proven case oi pigmented villonodular synovitis. The patient was a 21-year-old male with a mass of the right knee for 2 years. On fine needle aspiration cytology, the aspirates was composed of abundant mononuclear histiocytic cells, singly and in clusters, multinucleated slant cells, and hemoslderin pigments.

• 비파괴검사학회지
• /
• 제26권1호
• /
• pp.25-29
• /
• 2006

In this paper, the eddy current signals come from a pair oi transmit-receive (T/R) pancake coil on ECT array Probe are analyzed with the variations of the lift-of and of the distance between transmit and receive coils. To obtain the electromagnetic characteristics of the probes, the governing equation describing the eddy current problems is derived from Maxwell's equation and is solved using three-dimensional finite element method. Eddy current signals from T/R coils on ECT array probe have quite different characteristics compared with ones from impedance coil on rotating pancake coil probe. The results in this paper ran be helpful when the field eddy current signals from ECT array probe are evaluated.

• 펄프종이기술
• /
• 제34권2호
• /
• pp.67-72
• /
• 2002

The two stage laccase-assisted delignification process led to significant lignin removal in the non-pressurized treatments. It is clearly shown that an alkaline extraction prior to the second laccase treatment significantly increased the overall delignification by ∼15%. This is in line with the contention that the residual lignin has undergone structural changes during the alkaline extraction, and the resulting modified structures are susceptible to the laccase oxidation. In phenolic hydroxyl group, the pre- methylated sample was very responsive to the delignification process. The phenolic hydroxyl groups could be increased during side chain cleavage catalyzed by laccase. This finding demonstrates that the delignification oi etherified structures is an important reaction in the delignificaton by laccase.