• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.7-15
• /
• 2006

In-situ observation of electromigration in thin film pattern of 63Sn-37Pb solder was performed using a scanning electron microscope system. The 63Sn-37Pb solder had the incubation stage of electromigration for edge movement when the current density of $6.0{\times}10^{4}A/cm^2$ was applied the temperature between $90^{\circ}C\;and\;110^{\circ}C$. The major diffusion elements due to electromigration were Pb and Sn at temperatures of $90-110^{\circ}C\;and\;25-50^{\circ}C$, respectively, while no major diffusion of any element due to electromigration was detected when the test temperature was $70^{\circ}C$. The reason was that both the elements of Sn and Pb were migrated simultaneously under such a stress condition. The existence of the incubation stage was observed due to Pb migration before Sn migration at $90-110^{\circ}C$. Electromigration behavior of 63Sn-37Pb solder had an incubation time in common for edge drift and void nucleation, which seemed to be related the lifetime of flip chip solder bump. Diffusivity with $Z^*$(effective charges number) of Pb and Sn were strongly affect the electromigration-induced major diffusion element in SnPb solder by temperature, respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.1
• /
• pp.103-111
• /
• 2017

In this study, the thermomechanical stress and fatigue analysis of a high voltage and high current (3,300 V/1200 A) insulated gate bipolar transistor (IGBT) module used for electric locomotive applications were performed under thermal cycling condition. Especially, the reliability of the copper wire and the ribbon wire were compared with that of the conventional aluminum wire. The copper wire showed three times higher stress than the aluminum wire. The ribbon type wire showed a higher stress than the circular type wire, and the copper ribbon wire showed the highest stress. The fatigue analysis results of the chip solder connecting the chip and the direct bond copper (DBC) indicated that the crack of the solder mainly occurred at the outer edge of the solder. In case of the circular wire, cracking of the solder occurred at 35,000 thermal cycles, and the crack area in the copper wire was larger than that of the aluminum wire. On the other hand, when the ribbon wire was used, the crack area was smaller than that of the circular wire. In case of the solder existing between DBC and base plate, the crack growth rate was similar regardless of the material and shape of the wire. However, cracking occurred earlier than chip solder, and more than half of the solder was failed at 40,000 cycles. Therefore, it is expected that the reliability of the solder between DBC and base plate would be worse than the chip solder.

• Korean journal of applied entomology
• /
• v.53 no.4
• /
• pp.473-477
• /
• 2014

Halyomorpha halys (St${\aa}$l) (Hemiptera: Pentatomidae) is a typical polyphagous stink bug causing losses in several host plants including leguminous crops and fruits. Nutritional status of fruits such as apple and orange for the development of H. halys is not yet clear. We evaluated fruits of apple and orange with or without soybean-peanuts as food sources to investigate development, mortality and fecundity of the stink bug in a controlled condition. Those only fed on water could not develop into third instars. H. halys could not develop into fourth instar on apple only food. However, on an orange only food, 14% of H. halys emerged as adults. Those fed on orange only food had the longest development period (74.2 d). Total mortality of those fed on foods consisting of soybean-peanut ranged from 38 to 44%. In an average a female laid 169~190 eggs in a lifetime and those eggs had 81~83% hatchability. Results indicated that the apple fruit as a solo food source is an incomplete food for H. halys development while orange could support development of only few of the bugs.

• Journal of Dairy Science and Biotechnology
• /
• v.27 no.1
• /
• pp.1-12
• /
• 2009

In 2008, baby formula containing melamine was found to be responsible for a large outbreak of renal failure in infants in China. A total of 294,000 infants were hospitalized, and at least 6 babies died due to ingestion of the tainted formula. Melamine contains high levels of nitrogen (>60%), which is used as an indicator of protein content. Therefore, high levels of melamine in infant formula were thought to be the result of deliberate contamination m an attempt to increase its apparent protein content. Following inspections by China's national inspection agency, assorted products from at least 22 dairy manufacturers across China were found to have varied levels of melamine (range: 0.096196.61 mg/kg). Melamine co-exposure with cyanuric acid can induce acute melamine-cyanurate crystal nephropathy, which can lead to renal failure at much lower doses than if either compound were ingested alone. However, currently, there are very few data on melamine analogues other than cyanuric acid. At an expert meeting of the WHO and FAO held to review toxicological aspects of melamine and cyanuric acid on December 14, 2008, a new tolerable daily intake (TDI) of melamine was established that could be applied to the entire population, including infants. Therefore, a risk assessment of the various theoretical melamine contamination levels in infant formula and selected representative foods (other than infant formula and sole-source nutrition products) is urgently needed for Korean babies and children up to 7 years of age. Although the undetectable level regulation for infant formula may be low enough to guarantee the safety of babies under the age of 1 year (including premature babies), the melamine standard of 2.5 ppm for foods other than baby formula could be insufficient to protect the 95th percentile population aged 1~2 years because of this demographic's high consumption of milk, yogurt, and soy milk (hazard index = 1.79). Because TDIs are chronic values intended to protect an individual over his/her lifetime, occasional modest ingestion in excess of the TDI is not likely to be a health concern. However, children aged 1~2 years may have renal systems that are comparatively more sensitive to the crystallization of melamine and its analogues. Therefore, governmental jurisdictions may need to practice more prudent management of food items that could raise the melamine exposure for this population.

• Journal of Nutrition and Health
• /
• v.40 no.3
• /
• pp.221-228
• /
• 2007

We determined the effects of dietary manipulations on messenger RNA of peroxisome proliferators activated receptor isoforms (i.e., PPAR ${\alpha},\;{\beta}/{\delta},\;{\gamma}$) in red vastus lateralis muscle of rats. Total 16 male Sprague-Dawley rats were used, and animals were divided into one of two dietary conditions: either chow diet group (CHOW; n=8) in which animals were 134 with standard rodent chow (61.8% carbohydrate, 15.7% fat, 22.5% protein) or high fat diet group (FAT n=8) in which animals were fed 24.3% carbohydrate, 52.8% fat, 22.9% protein. At the end of the 8 weeks of experimental period, red vastus lateralis muscle was dissected out from all animals, and PPAR ${\alpha},\;{\beta}/{\delta},\;{\gamma}$ mRNA expression was determined. There was no significant difference in body mass (BM) between CHOW and FAT. As expected, blood glucose and free fatty acid (FFA) concentration was higher in FAT than CHOW (p<0.05), and lactate concentration was significantly lower in FAT compared to CHOW (p<0.05). Insulin concentration tended to higher in FAT than CHOW ($67.2{\pm}21.9\;vs.\;27.0{\pm}5.2$ pmol/L), but it did not reach to the statistical significance. Gene expression of PPAR ${\alpha}$ was not significantly different between CHOW and FAT. It was not also significantly different in PPAR ${\beta}/{\delta}$. Interestingly, expression of mRNA in PPAR ${\gamma}$ however, was markedly depressed in FAT compared to CHOW (approximately 3 fold higher in CHOW; p<0.05). Results obtained from present study implies that PPAR ${\gamma}$ (as compensatory function of PPAR ${\alpha}$ is expressed) possibly exerts another major tuning roles in fatty acid transport, utilization, as well as biosynthesis in skeletal muscle cells. The situations and conditions that can be postulated for this implication need to be further examined.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.2
• /
• pp.99-105
• /
• 2012

The main challenges for the development of agricultural bio-degradable mulching film concern the degradation during the lifetime of cultivated crops. A set of rice by-product (rice-hull and rice-bran) based bio-degradable mulching films was developed and tested, following the measurement of standard bio-degradability rate and adaptability in a large scale field experiment. The standard bio-degradability of bio-film passed the KS (Korea standard) regulation. The result of mechanical analysis of bio-degradable mulching film presented a higher mechanical strength and elongation rate compared with polyethylene film. In addition, bio-film could be degraded into fragments within 4 months under the field condition of several upland crops. Bio-degradable mulching film indicated great potential as a new source of agricultural bio-degradable material.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.629-634
• /
• 2017

In the case of the UHP (Ultra high performance) tire that the demand has increased rapidly, compared with the commonly used tire, severe deformation has been observed because of the low aspect ratio. When repeated deformations are applied to the sidewall rubber, accumulated fatigue damage may cause fatigue failure. Thus, the evaluation of the durability of the tire sidewall rubber has become a very important issue to prevent accidents that occur while the vehicle is running. However, the research and design criteria for the durability performance of the tire sidewall rubber hardly exist. In this study, we suggest a lifetime prediction formula using strain energy density obtained by performing tensile tests and fatigue tests on two different kinds of the tire sidewall compounds. Additionally, the applicability of our findings for low fuel consumption tires was reviewed by converting the fatigue life of the sidewall rubber into the expected mileage of the tire.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.4
• /
• pp.452-468
• /
• 2012

Marine organisms were collected by the stow nets and the stow net on boat fisheries from April 2010 to November 2011 in the Han River Estuary and categorized as 126 species, 61 families, and 5 taxa. The species were consisted with 34 in Crustacea, 5 in Cephalopoda, 79 in Pisces, unidentified jellyfishes in Cnidaria, and Finless porpoise in Mammals. The major species were composed of fish and crustaceans in the Han River Estuary. The dominant species in Crustacea were Chinese ditch prawn (Palaemon gravieri), blue crab (Portunus trituberculatus), Ridgetail prawn (Exopalaemon carinicauda), and mantis crab (Oratosquilla oratoria), and those in Pisces were Korean anchovy (Coilia nasus), and Japanese grenadier anchovy (Coilia mystus). The length structures of the six dominant species have more than one mode in the Han River Estuary. It reflects that the species inhibit during a part of and/or whole lifetime in the Han River Estuary where they utilize as spawning and/or nursery grounds. Freshwater fishes were collected from station D where is the closest location to the Han River stream, and their appearances were well matched with the large amount of freshwater discharge due to flood periods. Principal components analysis (PCA) was carried out with species compositions and showed temporal and spatial differences by the variations of species.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.495-500
• /
• 2007

The inside wall of a coal gasifier is lined with refractory, and the corrosion of the refractory is an important factor affecting the refractory lifetime and the replacement period. This paper examines the changes in microstructure of a chromia refractory due to chemical reactions with slag having varying amounts of $Fe_2O_3$. Slag samples were prepared by adding $Fe_2O_3$ to KIDECO slag, and static corrosion experiments were carried out at $1550^{\circ}C$. The layer of $(Fe,Cr)_3O_4$ formation and the depth of Fe depletion in the infiltrating slag were determined. In addition, FactSage equilibrium calculations were carried out in order to determine the conditions of formation, and to compare with the experimental observations. In the sample exposed to KIDECO slag, which has about 10 wt% $Fe_2O_3$, the formation of $(Fe,Cr)_3O_4$ was not observed. As the $Fe_2O_3$ concentration in slag increased, $(Fe,Cr)_3O_4$ formation and Fe depletion depth increased. Increasing $Fe_2O_3$ concentration also made the slag/refractory interface indistinguishable. Equilibrium calculations predicted that higher $Fe_2O_3$ concentrations favor chromite formation at gasification temperatures. The chromite formation was most favorable when the amount of $Cr_2O_3$ was limited, as in the case of dissolved $Cr_2O_3$ in slag. When the concentration of $Fe_2O_3$ in slag was less than 20%, the formation of chromite was least favorable in the system with equal amounts of slag and refractory.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.27-37
• /
• 2009

Sensor nodes forming a sensor network have limited energy capacity such as small batteries and when these nodes are placed in a specific field, it is important to research minimizing sensor nodes' energy consumption because of difficulty in supplying additional energy for the sensor nodes. Clustering has been in the limelight as one of efficient techniques to reduce sensor nodes' energy consumption in sensor networks. However, energy saving results can vary greatly depending on election of cluster heads, the number and size of clusters and the distance among the sensor nodes. /This research has an aim to find the optimal set of clusters which can reduce sensor nodes' energy consumption. We use a Genetic Algorithm(GA), a stochastic search technique used in computing, to find optimal solutions. GA performs searching through evolution processes to find optimal clusters in terms of energy efficiency. Our results show that GA is more efficient than LEACH which is a clustering algorithm without evolution processes. The two-dimensional GA (2D-GA) proposed in this research can perform more efficient gene evolution than one-dimensional GA(1D-GA)by giving unique location information to each node existing in chromosomes. As a result, the 2D-GA can find rapidly and effectively optimal clusters to maximize lifetime of the sensor networks.