• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.2
• /
• pp.7-11
• /
• 2003

Nowadays, as digital technologies are rapidly developed and requirements for the various types of broadband multimedia services increases, the radio broadcasting is moving to digitalization. DAB(Digital Audio Broadcasting), as an alternation of existing analog radio broadcasting, is a new type of multimedia broadcasting system. DAB supports not only high-quality audio broadcasting but also various types of multimedia data services. In this paper, we investigate the performance optimization method of MOT Protocol, as the standard for additional services, to support the multimedia services in the DAB network. Because the performance of the MOT protocol is dependent on various parameters such as segment size, segment repetition and so on, we find those by simulation for performance optimization. According to simulation results, the suitable segment size is about 2Kbyte and segment repetition is 4 times for performance optimization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.2
• /
• pp.154-161
• /
• 2013

This paper presents the signal-to-interference plus noise ratio (SINR) estimation of IEEE 802.16m WirelessMAN-Advanced mobile station with simulation and implementation results. The downlink signal of IEEE 802.16m has two kinds of A-Preambles: the PA-preamble and the SA-preamble. This paper proposes the efficient method of estimating SINR with A-Preambles, by measuring noise power from PA-preamble and measuring interference power and signal power from SA-preamble. The proposed SINR measurement block contains important features such as subcarrier phase rotation elimination and simplified dB transform. The result of this paper is integrated to ETRI's IEEE 802.16m test mobile station, used for decision of adaptive-modulation-and-coding (AMC) and hand-over. It showed good measurement performance in simulation and unified system link test also.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.718-726
• /
• 2002

This paper presents a novel Viterbi decoding architecture for European Digital Video Broadcasting (DVB) receiver. The channel sate information (CSI) of each sub carrier is used to weight the bit-metric of each symbol. The weighted bit-metric is delivered to Viterbi decoder after going through the symbol deinterleaver and bit deinterleaver, such that the CSI can be correctly applied to corresponding bits even after the two interleavings. Simulation shows that the new architecture gives significant performance enhancement of 6~13dB in Rayleigh fading channels depending on the modulation types. This results is also better than previous results by 3.7~10.3dB.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2479-2484
• /
• 2018

The filter bank multicarrier modulation (FBMC) technique is one of multicarrier modulation technique (MCM), which is mainly used to improve channel capacity of cognitive radio (CR) network and frequency spectrum access technique. The existing FBMC System contains serial to parallel converter, normal QAM modulation, Radix2 inverse FFT, parallel to serial converter and poly phase filter. It needs high area, delay and power consumption. To further reduce the area, delay and power of FBMC structure, a new clock gating technique is applied in the QAM modulation, radix2 multipath delay commutator (R2MDC) based inverse FFT and unified addition and subtraction (UAS) based FIR filter with parallel asynchronous self time adder (PASTA). The clock gating technique is mainly used to reduce the unwanted clock switching activity. The clock gating is nothing but clock signal of flip-flops is controlled by gate (i.e.) AND gate. Hence speed is high and power consumption is low. The comparison between existing QAM and proposed QAM with clock gating technique is carried out to analyze the results. Conversely, the proposed inverse R2MDC FFT with clock gating technique is compared with the existing radix2 inverse FFT. Also the comparison between existing poly phase filter and proposed UAS based FIR filter with PASTA adder is carried out to analyze the performance, area and power consumption individually. The proposed FBMC with clock gating technique offers low power and high speed than the existing FBMC structures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.417-425
• /
• 2007

While the cyclic prefix lengths of downlink OFDMA(Orthogonal Frequency Division Multiple Access) systems are determined based on the maximum delay spreads encountered in cellular environments, the guard interval of uplink OFDMA systems should consider the timing offsets of uplink signals as well as the delay spread lengths. Especially in the cases of initial accesses, handovers, and considerable time elapsed without data transmissions between base and mobile stations in a large cell, uplink timing offsets can be large and a very long guard interval length may be required. In order to keep the small size of the cyclic prefix in uplink OFDMA systems, the systems require a method of extending the guard intervals for users with large timing offsets without affecting the cyclic prefix length of the system. This paper proposes a method extending the guard intervals of individual users in uplink OFDMA systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.97-102
• /
• 2010

In this paper, an area-efficient FFT processor is proposed for IEEE 802.16e mobile WiMax systems. The proposed scalable FFT processor can support the variable length of 128, 512, 1024 and 2048. By reducing the required number of non-trivial multipliers with mixed-radix (MR) and multi-path delay commutator (MDC) architecture, the complexity of the proposed FFT processor is dramatically decreased without sacrificing system throughput. The proposed FFT processor was designed in hardware description language (HDL) and synthesized to gate-level circuits using 0.18um CMOS standard cell library. With the proposed architecture, the gate count for the processor is 46K and the size of memory is 64Kbits, which are reduced by 16% and 27%, respectively, compared with those of the 4-channel radix-2 MDC (R2MDC) FFT processor.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.70-76
• /
• 2011

LTE Re1-10 aims at peak. data rates of 1Gbits/s for the downlink and 500 Mbits/s for the uplink, which can be accomplished by not only wide spectrum but also advanced MIMO techniques such as precoded MIMO and cooperative relays. Considering some relays can have more direct signal paths than mobile stations do, LoS components are examined to build more efficient codebooks for Rician channels. The proposed codebooks perform better than the existing LTE codebooks as the criterium of LoS, K-factor increases. Conserving the advantages and max-min chordal distance of the existing LTE codebooks, the proposed ones also maximize the minimum chordal distances between codewords over Rician fading channels. Link-level simulation with LTE system parameters confirm the performance improvements as the value of K increases.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.3
• /
• pp.27-33
• /
• 2008

In this paper, we propose a cognitive beamforming scheme for coexistence of CR (Cognitive Radio) and IR (Incumbent Radio) systems. In order to maintain the priority of the IR in spectrum utilization the proposed cognitive beamforming scheme needs to have the CR not cause any interference to the IR systems occupying the same frequency band at the same time. In addition the proposed scheme has to provide maximum channel gain to the CRU (CR User) in a boundary of satisfying the former criterion. For this purpose, the proposed scheme does not cause any interference to the IRU (IR User), while the CRU is served without additional radio resource consumption. From simulation, we confirmed that when using the proposed scheme the CRU does not interfere with the IRU and there is little bit error rate performance degradation of the CRU as compared to that of the ideal beamforming system, which does not consider the IR priority.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1083-1090
• /
• 2009

In 18GHz using unified data transmission in a subway and railway, Influence of the multipath fading is big and an arrival range of the micro wave takes the influence greatly according to the transmit angle and receive angle because it not diffracted. This thesis analyzed microwave property underground tunnel and ground railway at unified data transmission in subway and railway. Antenna gain of directional antenna many used unified transmission in an subway and railway, is used 15dBi and 10dBi in simulation. Transmitter's property is compared underground tunnel to ground railway about curved railway of R=100, R=200, R=400. Specification of transmitter is used sample unified transmission system in subway and railway of KRRI(korea railroad research Institute). Transmitter's power is 20dBm and Reciever's sensitivity is -90dBm. According to result of simulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.11
• /
• pp.60-66
• /
• 2011

LTE (Long Term Evolution) supports QoS (Quality of Service) with several service classes. For each class of traffic, a big difference exists on BER (Bit Error Rate) requirement. This leads to a considerable difference in transmission power for various classes of traffic. In this paper, a novel scheduler is designed and proposed for LTE which supports CoS (Class of Service) with the consideration of priority as well as target BER. By the CQI (Channel Quality Indicator) and QCI (QoS Class Identifier), a minimum transmission power is assigned from the target BER for each class of traffic per each user. Hence, with the other information such as user's used rate in the past and the priority of traffic, the probability of occupying channels is determined. The simulation results of Service Class scheduling are compared with that of Maximum Rate and Proportional Fair. The results show that the service class-aided scheduling can improve the throughput of whole system significantly.