• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.961-963
• /
• 2002

Organic electroluminesencent device have been studied because of its easy fabrication and high brightness for plate panel display instead of cathode ray tube. There are some device structure for full color filter system can be applicable to the full color application if the blue light organic electroluminesencent device(OELD) is developed. In this study, we fabricated OELD of ITO/CuPc/PBD/LiF/Al using mixed of 500, 600, $700[{\AA}]$ by vacuum method as a emitting layer. We studied the voltage-current, voltage-luminance characteristics and blue light emission of OELD,

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.2
• /
• pp.110-118
• /
• 2002

Organic thin film transitors(OTFT) are of interest for use in broad area electronic applications. And recently organic electroluminescent devices(OELD) have been intensively investigated for using in full-color flat-panel display. We have fabricated inverted-staggered structure OTFTs at lower temperature using the fused-ring polycyclic aromatic hydrocarbon pentacene as the active eletronic material and photoacryl as the organic gate insulator. The field effect mobility is 0.039∼0.17 ㎠/Vs, on-off current ratio is 10$\^$6/, and threshold voltage is -7V. And here we report the study of driving emitting, Ir(ppy)$_3$, phosphorescent OELD with all organic thin film transistor and investigated its electrical characteristics. The OELD with a structure of ITO/TPD/8% Ir(ooy)$_3$ doped in BCP/BCP/Alq$_3$/Li:Al/Al and OTFT with a structure of inverted-stagged Al(gate electrode)/photoacry(gate insulator)/pentacene(p-type organic semiconductor)/ Au(source-drain electrode) were fabricated on the ITP patterned glass substrate. The electrical characteristics are turn-on voltage of -10V, and maximum luminance of about 90 cd/㎡. Device characteristics were quite different with that of only OELD.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.358-360
• /
• 2001

In this study, the bis(8-oxyquinolino)zinc II (Znq$_2$) were synthesized successfully from zinc chloride (ZnC1$_2$) as a initial material. Then, we fabricated red organic electroluminescent device with a dye (DCJTB)-doped and inserted Znq$_2$ between emission layer and cathode layer for increasing EL efficiency. The hole transfer layer is a N,N'-diphenyl-N,N'-bis-(3-methyl phenyl) -1,1'-diphenyl-4,4'- diamine(TPD), and the host material of emission layer is Znq$_2$. And we study the electrical and optical properties of devices. We found that the device using Znq$_2$ inserting layer result in the increased efficiency.

• Optical Science and Technology
• /
• v.4 no.2
• /
• pp.4-15
• /
• 2000

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.5
• /
• pp.976-985
• /
• 2002

The purpose of this paper is that the roughness(Rrms = 31$\AA$, Rp-v = 270$\AA$) of ITO thin film deposited by sputtering method for OELD is improved to Rrms $\leq$ 10$\AA$, Rp-v $\leq$ 80$\AA$ by chemical mechanical polishing(CMP). First, ITO thin films are polished with a variety of consumables (Pads, Slurries) to choose proper some for the roughness improvement and the CMP mechanism of ITO thin films is demonstrated on the ground of the experiment results. Henceforth, the CMP characteristics (Removal rate, Non-uniformity) of chosen consumables are evaluated according to processing conditions (Polishing pressures, Table velocities) and suitable conditions for ITO film CMP are selected. Finally, the electrical and optical properties (Sheet resistance, Transmittance) of ITO thin films are investigated to verify whether or not ITO thin film are still suitable for OELD after polished.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.51-58
• /
• 2006

The old technique of sandblasting which has been used for paint of scale removing, deburring and glass decorating has recently been developed into a powder blasting technique for brittle materials, capable of producing micro structures larger than $100{\mu}m$. Recently, this technique is applied to fabrication of the glass cap for OELD packaging. But, micro crack is generated on the blasted glass, which cause to decrease fracture strength. In this paper, we investigated the effect of blasting parameters on surface characteristics, surface shape and fracture strength of the powder blasted glass surface.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.25-28
• /
• 2000

In this paper, three types of organic electroluminescent devices(OELD) were fabricated on mechanically flexible plastic substrate by using vacuum deposition method. The devices consist of a hole transporting material such as TPD, a light-emitting material such as Alq$\sub$3/ and an electron transporting material, blocking material such as PBD. Electrical and optical properties of these OELDs were measured. This paper shows that organic small molecules based on OELD can be successfully deposited on a flexible plastic substrate. This points open the potential for low cost mass production of flexib]e displays, including roll to roll processing.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.109-111
• /
• 2001

In this study, The cathode interface layer (CIL) was investigated using aromatic diamine derivatives. Cz-TPD (4,4'-biscarbazolyl (9)-biphenyl) used in the cathode interface layers is investigated emition charcaracteristics at the green organic electroluminescent devices TPD (N.N'-dyphenyl-N-N'-bis(3-methy phenyl)-1.1'-biphenyl-4.4'-diamine) as the hole transformer layer and $Alq_3$:tris (8-hydroxyquinoline) aluminium) as the electron transport layer and emiting layer maded use of the organic electroluminescent device. The Organic Electroluminescent Device with Ag, cathode and CIL of Cz-TPD(4,4'-biscarbazolyl(9)-biphenyl) showed good EL characteristics compare to a conventional Mg:Ag device and also an improved storage stability.[1] As the change in MgAg, Cz-TPD/Ag, Ag at the chthode, the electron and optical charcaracteriseics were investigated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.124-127
• /
• 2002

In this study, The cathode interface layer (CIL) was investigated using aromatic diamine derivatives. Cz-TPD (4,4'-biscarbazolyl(9)-biphenyl) used in the cathode interface layers is investigated emition charcaracteristics at the green organic electroluminescent devices. TPD (N,N' -dyphenyl -N -N'-bis (3-methy phenyl)-1,1' -biphenyl-4,4' -diamine) as the hole transformer layer and $Alq_{3}:tris$ (8-hyd-roxyquinoline) aluminium) as the electron transport layer and emiting layer maded use of the organic electroluminescent device. The Organic Electroluminescent Device with Ag cathode and CIL of Cz-TPD(4,4'-biscarbazolyl(9)-biphenyl) showed good EL characteristics compare to a conventional Mg:Ag device and also an improved storage stability. [1] As the change in MgAg, Cz-TPD/Ag, Ag at the chthode, the electrical and optical charcaracteriseics were investigated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.96-98
• /
• 1999

유기전계발광소자(OELD)의 성능 향상을 위한 많은 연구가 진행되고 있지만 아직까지 금속전극과 유기발 광층 사이의 접촉저항(Contact Resistance)에 관한 연구는 거의 보고되지 않고 있다. Ohmic 접합에서 접촉 저항은 효율적이고 신뢰성 있는 소자제작에 있어서 간과되어서는 안될 매우 중요한 부분이다. 본 연구에서는 금속전극과 유기발광충 사이의 접촉저항에 관해서 논의하고자 한다. 본 연구에서 제작된 샘플은 금속전극으로 Ag, 유기발광재료로서 Alq$_3$를 사용하였으며, Alq3의 두께를 100 $\AA$에서 500 $\AA$까지 각각 다르게 하여 서로 다른 두께의 유기발광층을 가지는 샘플을 제작하였다. 금속전극의 매트릭스 구조에 의해 형성된 적선의 크기는 3 mm x 2 mm이며, 제작된 샘플의 접촉비저항은 TLM(Transmission Line Measurement) 방법을 이용하여 구하였다. Planar한 TLM model로부터 새로운 vertical model을 유추하였으며, 이를 근거로 접촉저항 및 transfer length 등을 계산하였다. 상온에서 측정된 전체 저항값은 유기발광층의 두께가 증가함 에 따라 증가하는 경향을 나타냈으며, 이 때 계산된 접촉비저항은 1.49$\times$$10^1$ $\Omega$-$\textrm{cm}^2$ 이다. 접촉저항은 전극 사이의 거리의 증가에 따라 증가하지만, 측정시간의 thermal budget의 영향으로 상대적으로 전체저항이 감 소하였으나, 저항감소분의 포화에 따라서, 거리에 비례하여 다시 저항이 증가하였다.