• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.48-56
• /
• 2008

This study provides to car driver with car exhaust gas and sensor information which are car trouble code in engine and many sensors when the car has some problems. This is to provide car manager with many information of car sensors when we go to vehicle maintenance. For example, information of engine RPM, fuel system, intake air temperature, air flow sensors and oxygen sensors can provide to owner or garage, and also add to multimedia system for mp3 files and video files. This system consists of embedded linux system of low power while driving the car which uses OBD-II protocols and zigbee communication interface from CAN communication of car system to self-diagnosis embedded system of car. Finally, low power embedded system has a lot of application and OBD-II protocols for embedded linux system and CAN communication which get sensor informations of car control sensor system while driving the car.

• Microbiology and Biotechnology Letters
• /
• v.43 no.3
• /
• pp.275-279
• /
• 2015

Micro-algae are unicellular photosynthetic organisms and produce pigments such as chlorophyll and carotenoid. Chlorella contains a lot of protein and functional components like lipids, chlorophyll and carotenoids. In this study we induced mutants of Chlorella vulgaris (C. vulgaris) through ultraviolet radiation (UV-B) and selected two mutants by pigment (chlorophyll and carotenoids) content. We named the mutants ‘UBM1-2’, ‘UBM2-57’ and they were cultivated for 21-days. Cell growth, dry cell weight, protein content, lipid and pigments content were measured. The results indicated that the mutants displayed slower cell growth, lower dry cell weight and protein content than the wild type. However, for UBM1-2 the lipid content was 21% higher than the wild type. In addition, the mutants’ chlorophyll content was 37% and 89% higher than the wild type and the carotenoids content was 27% and 70% higher than the wild type, respectively.

• Korean Journal of Microbiology
• /
• v.30 no.2
• /
• pp.88-95
• /
• 1992

The genetically engineered microorganisms (GEMS) could be released accidentally or ii)rexperimental purposes, as the genetic engineering, technique ha:. become very popular inany laboratories of biological sciences. But there have been littlt: informations on transkrbehavior of the genetically ~nodified genes in the natural en\ironmentx. In this stutly.antibiotic resistant bacteria were isolated from nat.ural waters. and then GEM strains wereconstructed i'rom the natural isolate (NI) by ~noclification oi' the Km' plasmitl. Thetransferability of the plasmids in the GEM and NI strains were examinetl by con-jugationin Luria-Bertani broth :it 30$^{\circ}$C. Also the cff'ccts 01' mating strain and pH on their transferfrequency and rearrangement of the plasmids in tl-~ec o~ijugantsM ere comp:irati\ely stuclictl.I'hc transkr frequency of Km' plasmid in donor of GEM and N1 strains wah similar a.;about 10 ' when co~ljugation was conducted wit11 M'I'I strain is recipient at pH 7. butthat of 1)KCOOI was lowered to 1.2X 10 '. And when the lab. stlain was uhccl as recipient.the transfer tendency of the plasmid was about same in both (;EM and NI strains usedas donor. All thc tionor 5trains. except for I)KC601. showecl the Ilighcs~ frequency of about10 ' at pH 7 and the frequcncics were lowered at both pH 5 and 9. Hut the mocliliedKm' plasmid in the cloned strain of DKC601 was transferred hy very low frequency of10 "at pH 5 ant1 7 comparing to other GEM strains. especiall! any co~~.jugantws ere notobtained at pH 4 and 9 even after conjugation for 6 hours. Rearrangement of the plasmidstranskrred into the lab. strain was not found in the conjugants. I\ulcornerut a lot of rearrangclncntwas ohservecl nlhen they were transferred into the NI strain. Such a rearrangement wasmore severe when donor was GEM strain rather then NI strain Hut such ;r phenomenonwas less affected by p!-l values.r phenomenon was less affected by p!-l values.

• Journal of Internet Computing and Services
• /
• v.3 no.4
• /
• pp.83-94
• /
• 2002

Recently for software development productivity a lot of researches in the field of software engineering hove focuses on the component-based software product lines which allows the reuse of forger-granularity software components Its purpose is to develop the specific software application of quality more rapidly by instantiating and assembling the components populated in software product line assets The essential part to build the component-based software product lines is the quality of components, and one of the most important features determining the quality of components is 'reconfigurability' Component reconfigurability means the extent to which the reusers can change the functions and architecture of the component according to their context and environment. This paper proposes the component code generation technique which provides the reconfigurability at the time of code generation using The feature diagram and XML/XSLT technologies The approach of this paper allows the component reusers to get automatically their own component source code by providing only the values of variabilities represented in the feature diagram of the component family. The real world example, the code generation system for o list container family, shows the applicability of the feature model and XML related technologies in the area of the generative programming. Our approach should be basis to build the component based software product lines and extensible to support the larger graularity components.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.208-212
• /
• 2010

The high-speed railway consists of tracks, gravel ballast and subgrade, and the dynamic load is passed to subgrade through track and gravel ballast. The relaxation condition of the gravel ballast is able to be evaluate relatively and to be repaired through a continuous management, but it is difficult to evaluate the condition of subgrade, which is final part of supporting dynamic load and to repair it when made a problem. The gravel ballast and subgrade are evaluated by determining shear wave velocity. To evaluate ballast and subgrade, a good method to determine shear wave velocity is a non-destructive experiment such as surface wave tests providing a prompt experiment because an experiment in railway has a lot of tests which are carried out following railway directions and needs to prevent damage of the system. In general, a railway has limitation of an experimental space by narrow width, sleeper and etc., and background noise by a reflector exists. The existing surface wave tests need a minimum space, and it is difficult to get a reliable test results on account of background noise effect. Therefore, it is difficult or impossible to apply to existing surface wave test of subgrade and ballast. In this study, the HWAW method is applied to determine a shear wave velocity profile of the underground. The HWAW method is the experiment which is able to be carried out on a narrow space, and it determines share wave velocity of a site by measuring the wave from surface sources on the same spot. In addition, it removes effects of background noise accordingly to a signal processing using harmonic wavelet transforms, so it is useful to evaluate subgrade of a high-speed railway in the narrow space and the situation of background noise. In order to check an application of the HWAW method, an experiment is carried out on a high-speed railway field and a test result is compared to boring results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1164-1167
• /
• 2003

Recently CRT is getting flatted, As change of CRT trend from normal type to Flat type, the material of Shadow Mask was also changed from AK(Aluminum Killed) to Invar(Fe-Ni alloy) materials Until now we have used just AK(Aluminum Killed) for normal type TV(not flat type), but main raw material of shadow mask component was changed. . However recently Invar(Fe-Ni alloy) materials, which has advantage of Low Thermal Expansion and High Strength, has been developed as well as applying in mass production as CRT's trend has become more flat and fine pitch. As main raw material of shadow mask component was changed, conditions of process were changed. One of them, the importance of pre-etching process (assistant process for developing & etching) is improved because there are so many particles in the pre-etching bath because of Ni compounds. Since the solubility of Ni in pre-etching solvent is very low related to Fe's, so the compounds of Ni happen to make particles.(the solubility of Fe is twenty times Ni's) that particles happen to make process troubles and NG productions so to clear the particles we had to established high cost filtering system, but it is useless. As time goes by the quantity of particles (Ni compounds) was increased because of the capability of filtering system was not enough, the particles was produced continuous in bath, and it make quality problems. Hence we tried to develop the new pre-etching solution to remove the particles (Ni compounds) and to cost down the filtering system's running cost. But in improving the solution we discovered the new pre-etching solution made the PR developing better. In former solution there were three kinds of chemistry (COOH)2 , H2O2 , H2S04 .first the function of (COOH)2 is drilling the surface of Invar, during this mechanism Ni compounds occurred. Second the function of H202 is removing the PR fringe (half UV exposure zone on PR(PVA)), Third the function of H2S04 is the catalysis of (COOH)2 In those, (COOH)2 was the main reason to make the Ni compounds. So to improve the solutions we had to change (COOH)2 to the other material. the chemistry we improved was a complex chemistry based on H2S04 . after using this chemistry the particles problem was disappeared and there was another advantage cut down the PR fringe. The New solution made the function of H202 better so the PR developing improved. To be direct the catalyst of the new solution helped the H202. anyway First thing after change the solution the quality of shadow Mask for flat color TV was improved & the yield also improved. But the more important thing is how to control the new solution. So we accepted the new concept which was the degree of freshness. The degree of freshness is based on non-reacted solution which was 100% ( the degree of freshness) and calculated the melted Ni quantity as time goes by. So we made the gauging liner plot. In conclusion, many companies tried to make fine pitched Shadow Mask ,generally to make quality jump up it needed a lot of cost & persons .in this case the shift of core material made it possible.

• Journal of the Korean Society of Costume
• /
• v.24
• /
• pp.59-82
• /
• 1995

All kinds of art are the creatures of the daly and reflect the society and the life of the day in literary works. So, in which literary works, we can find the styles of those who lived in the specified days. And the styles of its character's costume are expressed with the day'mood and cultural backgrounds. In this study, we studied on the general meaning, which was shown in the Costume of early Ch'ing Dynasty that was forming the Costume of dress through dividing into the underwear and the outer garment in $\ulcorner$Dream of the read Chamber$\lrcorner$. During the Ch'ing Dynasty, according to the rule : Men followed it but women not" , they held on to the costume of them (both the Man and the Han) with a high pressure and a conciliatory policy. As a result, I have known that there is the Soojean clothe(수전의), which is the late Myung Dynasty's one and their is also Skirt (군), which held on the Costume of the Myung's. Hence in the Ch'ing , there are a lot of difference in the Costume , the economy and the politic because the ruler was not the han but the Ch'ing. Those characters are as follows. first, on the side of the style , it is occured in the coat and the over jacket of the round neckline. The style of the sleeves are also the tightly(고착). Second, on the side o f the material, the use of the furs are found. It seems that are influence of the north area. Third, it is involved not the traditional Costume of the Han, but the over jacket(which is waistlength), These characters had taken root into the Costume of the Ch'ing Dynasty. In case of the jacket, which are found in the novel most frequently , it was represented by the tight jacket (소오), the long jacket (대오), the short jacket(단오) and the Sam (삼). The skirt was used by women only. the Slacks were trousers only for men, so it was not foujnd in the women's wear. In the vest, the over jacket and coat, which are for putting on, its material, insiqnia and varied embroidery are very brillant and elaborate. The used materials are the silks , furs, wools and cottons. Among the dick silks are used most frequently . in case of the over jacket, the precious and varied furs are used for the collar, the sleeve or the decoration and the lining cloth. In the novel, mean followd the Costume of the Man and women followed the Costume of the Han. Especially, it is a special costume that there were women in male attire. Finally, the costume of the Ch'ing had built the unique one with holding on the advantage and the short point s of the northen race and the Han's. Also , I can find the brilliant , eleborate Customes of the aristocratic class in the novel.

• Applied Microscopy
• /
• v.31 no.3
• /
• pp.267-274
• /
• 2001

This study was carried out to understand the effects of Saengchinyanghyoltang-gamibang (SGT) on pancreatic islets of the mice induced with streptozotocin (STZ). In the control group, two times injected with 50 mg/kg 572 at 24-hour intervals, a few number of insulin immunoreactive-cells are observed at the pancreatic islets of the mice. In the experimental group which administered with extract of SGT during 21-day, a number of immunoreactive-cells are observed at the pancreatic islets. According to the electron microscopic observation, $\beta-cells$ of the control group were contained a few of secretory granules, but also these granules were contained electro-lucent materials. In the experimental group, a lot o( secretory granules and well developed cell organelles are observed at the $\beta-cells$. The level of glucose was significantly decreased in the experimental group compared with control group, but the level of BUN was similar in these two groups. These results suggest that administration of SGT to the mice improved the damage of $\beta-cells$ from injected with STZ.

• Korean Journal of Weed Science
• /
• v.10 no.3
• /
• pp.186-191
• /
• 1990

This experiments was conducted to investigate the dormancy of Eleocharis kuroguwai tuber in the earth and the influence of seeding time and depth on the emergence of Eleocharis kuroguwai. The tuber of Eleocharis kuroguwai on underground was formed the most amount between 10cm and 15cm layer and formed the second a lot of tuber in the soil layer between 5cm and 10cm, the third between the surface of the earth and 5cm, the least between 15cm and 20cm. The total mean emergence of tuber was 78%, and the dormant tuber was approximately 22% of total tuber formed during a year in the earth. The distribution of dormant tuber under the ground was about 42% between 15cm and 20cm, 39% between 10 cm and 15cm, 14% between 5cm and 10cm, and 5% between the surface of the earth and 5cm. The dormancy percent of tuber formed at each soil layer was about 60% between 15cm and 20cm, 21% between 10cm and 15cm, 12% between 5cm and 10cm, and 7% between the surface of the earth and 5cm. The emergence days of the tuber seeded at low layer was short, and the emergence rate was high, The tuber was formed much more on seeding at May 30th than June 30th.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.64.1-64.1
• /
• 2018

SNe light curves have been used to understand the expansion history of the universe, and a lot of efforts have gone into understanding the overall shape of the radioactively powered light curve. However, we still have little direct observational evidence for the theorized SN progenitor systems. Recent studies suggest that the light curve of a supernova shortly after its explosion (< 1 day) contains valuable information about its progenitor system and can be used to set a limit on the progenitor size, R*. In order to catch the early light curve of SNe explosion and understand SNe progenitors, we are performing a ~8hr interval monitoring survey of nearby galaxies (d < 50 Mpc) with 1-m class telescopes around the world. Through this survey, we expect to catch the very early precursor emission as faint as R=21 mag (~0.1 Rsun for the progenitor). In this poster, we outline this project, and present a few scientific highlights, such as the early light curve of SN 2015F in NGC 2442.