• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.6
• /
• pp.102-115
• /
• 2016

In this study, a scheme of ramp metering that uses Off-ramp Exit Percentage instead of the O/D table required for systems of integrated control of ramps at the target freeway segment is presented. The segment from Gyeyang IC to Jangsu IC on the Seoul Outer Ring Expressway was selected for the study because the segment frequently shows large volume of traffic on the short distance between the two ICs requiring an integrated on-ramp control by taking the traffic situation on an entire expressway into account despite an unavailability of O/D data. Thus the information of Off-ramp Exit Percentage at each IC were collected instead of securing the O/D table through actual survey, and the congestion on the segment was analyzed to identify the validity of the use of off-ramp traffic instead of O/D data. In addition, the scheme of ramp metering that exploits the off-ramp traffic information was prepared through simulations conducted in a way supporting the traffic control for respective access roads thereof by taking traffic situations and queues on each ramp into account. The results obtained from the simulation analyses revealed an improved level of travel speed and traffic volume on the main line and validated the use of off-ramp traffic instead of the O/D table for the ramp metering.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.04a
• /
• pp.207-214
• /
• 1997

The objective of this study is to review the current stare of earthquake simulation techniques using the shaking table and check the reliability. One degree-of-freedom(d.o.f.)and three d.o.f. aluminium shear models were used and 4m$\times$4m 6 d.o.f. shaking table was excitated in one horizontal direction to simulate 1940 El centro earthquake accelerogram (NS component). When the acceleration history of shaking table is compared to the desired one, it can be found that the overall histories are very similar, but that the lower frequency range (0~2 Hz) of the actual excitation has generally lower amplitude than that of the desired in fourier transform amplitude. Free vibration and white noise tests have shown almost the same values for natural frequencies, but shown quite different values for damping ratios, that is, 1.37% in case of r\free vibration test vs 14.76% in case of white noise test. The time histories of story shear versus story drift show the globally linear elastic behaviors. But the elliptical shape of the histories with one of the axis being the stiffness of the story implies the effect of viscous damping.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.417-424
• /
• 2006

To get more accurate trip distribution estimation results, this study developed an improved gravity model. Using three different year's O-D table resulted from person trip survey, this study analyzed correlative between basic year's residuals and target year's residuals by gravity model. And resulted that the two have linear correlation. From this, improved gravity model was developed as adding basic year's residual to present gravity model. Developed gravity model was compared to present gravity model by estimation accuracy, and revealed that distributed trips from improved gravity model was more closer to real O-D than distributed trips from present gravity model.

• Applied Biological Chemistry
• /
• v.3
• /
• pp.25-48
• /
• 1962

The polysaccharide C prepared from gum tragacanth powder (U. S. P. grade) by the precipitation method with 85% ethanol was a neutral polysaccharide, $[{\alpha}]^{30}_D-72.2$. The polysaccharide C consisted of L-rhamnose, D-xylose, L-arabinose and D-galactose in the molar ratio 2:1:17:9 (Table 1, 2, 3, ). The polysaccharide C was methylated with dimethylsulphate and 40% NaOH, and Purdies regent. The hydrolyzate of fully methlated product ($[{\alpha}]^{22}_D-102$ in chloroform, the methoxy content 40.6%) was composed of 2, 3, 5-tri-O-methyl-L-arabofuranose (I), 3,4-di-O-methyl-L-rhamnopyranose (II), 2,3-di-O-methyl-D-xylose (III), 2,3,4-tri-O-methyl-D-galactopyranose (IV), 2,4-di-O-methyl-L-arabopyranose (?), 2,4-di-O-methyl-D-galactose(VI), 2-O-methyl-D-arabinose (VII), and L-arabopyranose(VIII) (Table 4, 5, and Fig. 4). The first partial hydrolysis (A) of the polysaccharide C with 0.05N-HCl for 4.5 hours at $80-85^{\circ}C$ released only L-arabinose: the second hydrolysis (B) with 0.1N-HCl for 5 hours at $80-85^{\circ}C$, L-arabinose and D-galactose; and the third hydrolysis (C) with 0.3N-HCl at $90-95^{\circ}C$ in sealed tube, L-rhamnose, D-xylose, L-arabinose and D-galactose. From the unhydrolyzate A' were found L-rhamnose, D-xylose, L-arabinose, and D-galactose; from B' L-rhamnose, d-xylose, L-arabinose and D-galactose; and from C' D-xylose and D-galactose respectively (Table 6). The periodate consumption and formic acid production of the polysaccharide C were measured at various time intervals. After 120 hours periodat was consumed by 1.23 mole per $C_5H_8O_4$ and formic acid was produced 0.78 mole per $C_5H_8O_4$ (Table 7). Although a definite chemical structure for this polysaccharide C may not be formulated, experimental data, especially, from methylation, partial hydrolysie and determination of its molar ratio, and periodate analysis showed that the polysaccharide C is a highly branched polysaccharide and would be constructed of galactoaraban as a main chain residue and L-arabofuranose, D-galactopyranosyl $(1{\rightarrow}1)$-L-arabofuranose, D-xylopyranosyl $(1{\rightarrow}2)$-L-rhamnopyranosyl $(1{\rightarrow}1)$-L-arabofuranose, and L-rhamnopyranosyl $(1{\rightarrow}1)$-arabofuranose, and D-galactopyranosyl-$(1{\rightarrow}2)$-L-arabopyranosyl-$(1{\rightarrow}1)$-I-arabofuranose as a branch chain or end group (page 21).

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.1
• /
• pp.51-56
• /
• 1997

The objective of this study is to review the current state of earthquake simulation tecniques using the shaking table and check the reliability. One degree-of-freedom(d.o.f) and three d.o.f aluminium shear models were used and $4m{\times}4m$ 6 d.o.f shaking table was excitated in one horizontal direction to simulate 1940 El centro earthquake accelerogram (NS component). When the actual acceleration history of shaking table is compared to the desired one, it can be found that the overall histories are very similar, but that the lower frequency range (0~2 Hz) of the actual excitation has generally lower amplitude than that of the desired in Fourier transform amplitude. Free vibration and white noise tests have shown almost the some values for natural frequencies, but shown quite different values for damping rations, that is, 1.37% in case of free vibration test vs 14.76 % in case of white noise test. The time histories of story shear driff show the globally linear elastic behaviors. But the elliptical shape of the histories with one of the axis being the stiffness of the story implies the effect of viscous damping.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.5
• /
• pp.326-334
• /
• 2019

Development of Small UAV using HILS (Hardware In the Loop Simulation) can be effectively used to improve the reliability of UAV (Unmanned Aerial Vehicle) while reducing cost and time. It is also possible to reduce the damage to people or property by simulating the malfunction of the Flight Control Computer (FCC) that may occur during the actual flight. For applying such HILS, a real-time simulation environment capable of providing an environment similar to an actual flight condition is required. In this paper, we constructed a real - time HILS environment for Small UAV using 6 D.O.F motion table. In order to link the 6 D.O.F motion table developed in the previous research with the HILS environment in real time, the motion algorithm was changed from the position control method to the velocity control method. Also, we implemented modeling of inverse kinematics model for command transmission in Matlab $Simulink^{(R)}$ and verified the action of motion table according to the simulation model.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.99-110
• /
• 1999

This study deals with the adaptability questions of O-D table estimation models. Its objectives are two-fold; (1) to estimate the characteristics of various O-D table estimation models(i.e. linear regression models. entropy models and statistic models) and (2) to find the model which estimates the O-D table with the best accuracy under the various data conditions. In Pursuing the above, this study gives the particular attentions to the test of the models, using the Sioux Falls network and equilibrium assignment method of MINUTP. The major findings are the followings. Firstly. it finds that the statistic models have the most goodness of fat among all models, if the required data are all Prepared. But it Presents that statistic models are the most sensitive against the underspecification and inconsistency problems of link data. Secondly, It shows that the linear regression models have the worst goodness of fat among all models. But the linear regression models are the most insensitive to the underspecification and inconsistency problems. Thirdly, THE/1 model of entropy model is sensitive against the underspecification and incon-sistency problems, but THE/2 model is insensitive. Finally, other informations like total volume, zonal Production and attraction volumes in 0-D table, help models to gain the better goodness of fit. Especially, in the statistic models. both the zonal production and attraction volume data are helpful to estimate the link volumes. It can be expected that the results dive some implications not only to the selection of optimal model under the various given data, but also to the development or modification of model.

• Animal cells and systems
• /
• v.6 no.1
• /
• pp.19-22
• /
• 2002

Life table studies were conducted in the laboratory for the eulophid gregarious pupal parasitoid, Tetrastichus sp., on Hyphantria cunea Drury at a constant temperature of 28.2$\pm$2$^{\circ}C$, 50-60% RH to evaluate their impact on the host and their potential biological control. Development of immature stage took 20.1$\pm$2.7 d: adult females lived for 23.2$\pm$2.2 (range, 16-27)d and produced a mean of 53.6$\pm$26.6 adult progeny per female, with a sex ratio of 1: 9.5 (M:F). The intrinsic rate of natural increase (r$_{m}$) was 0.178/ female/day; the net reproductive rate (R$_{o}$), 46.74; the capacity for increase (r$_{c}$) 0.177; the finite rate of increase (λ) 1.19/female/day; thus each female contributed 46.74 individuals to the population in a mean generation time of 21.6 d. Biological factors in determining the life history trait variation of the parasitoid were discussed.d.d.d.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.185-192
• /
• 2011

More practical outputs and insights can be obtained through transportation analysis considering the time-dependent traffic movements. This study proposes a method of constructing time-dependent O-D trip tables for expressway corridor using real-world individual trip data. In this study, time-dependent O-D trip tables for the nationwide highway network are constructed based on toll collection system data. The proposed methodology is to convert nationwide time-dependent O-D trip tables into Korean expressway corridor O-D trip tables in order to deal with the computational complexity arising from simulating a large-scale traffic network. The experiment results suggest that actual individual trip record data can be used to effectively construct time-dependent O-D trip tables. They also imply that the construction of time-dependent O-D trip tables for the national highway networks along with those for Korean expressway developed in this study would make transportation analysis more practical and applicable to real-time traffic operation and control.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.287-295
• /
• 2013

This paper developed advanced gravity model for higher estimation accuracy, that deals with residuals. Previously studied paper using gravity model's residual, residual calculated that observed O-D value minus derived O-D value from gravity model, and this residual added to the target year's estimated value from gravity model. In this paper, residuals calculated on gravity model parameter estimation process, and this residual is revealed the same value that observed O-D value devided by derived O-D value from gravity model. And case study resulted that developed new gravity model that applied accordance rate of observed O-D value and derived O-D value from gravity model has higher estimation accuracy than other gravity models as basic gravity model and residual plused gravity model.