• 한국항공우주학회지
• /
• 제30권2호
• /
• pp.1-11
• /
• 2002

본 연구에서는 특별히 PC cluster와 같은 병렬 환경에서 효율적인 계산을 수행할 수 있는 격자중심에 기초한 직접모사 기법을 개발하였다. 병렬환경 하에서의 효과적인 계산 수행을 위해서는 전체 계산 영역을 격자수와 각 격자에 할당되는 모사 입자 수를 고려한 부 영역들로 나누어주었다. 또한, 격자 사용의 효율성 증대를 위해서는 매우 성긴 격자에서부터 출발하여 점차적인 격자 적응을 수행하였다. 본 방법은 2차원의 초음속 평판 문제와 축대칭의 Rothe, 노즐 문제에 적용하였다. 그 결과로부터 본 방법을 사용하면 기존의 입자 중심 기법에 비해 매우 효율적으로 희박기체 유동을 해석할 수 있음을 알 수 있었다.

• 한국정보과학회논문지:시스템및이론
• /
• 제29권7호
• /
• pp.384-393
• /
• 2002

병렬 파일시스템은 클러스터 시스템에서 과도한 입출력 요청을 원활하게 지원하기 위해 사용되며, 특히 파일 선반입은 병렬 파일시스템의 성능을 개선하는데 유용하게 사용된다. 본 논문은 과학계산용 병렬 응용과 멀티미디어 서버 응용에서 효과적인 파일 접근 유형을 고려한 새로운 동적 파일 선반입기법인 Fips를 제안한다. 본 논문이 제안하는 동적 파일 선반입 기법인 Fips는 파일의 접근 유형을 고려하여 동적으로 선반입 할 데이타 블록을 예측하고, 다양한 접근 유형에서도 데이타 블록의 선반입을 효율을 높였다. 그리고 현재의 가용 대역폭을 고려하여 선반입 시기를 결정하므로 선반입이 시스템에 과부하로 작용하는 것을 방지하도록 하였다. 병렬 파일시스템에 Fips를 적용하여 실험한 결과 다양한 작업부하에서 제안한 선반입 기법은 우수한 성능을 보여주었다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권5호
• /
• pp.242-248
• /
• 2002

It is important to develop new effective technologies to increase the interruption capacity and to reduce the size of a UB(Gas Circuit Breakers). Major design parameters such as nozzle geometries and interrupting chamber dimensions affect the cooling of the arc and the breaking performance. But it is not easy to test real GCB model in practice as in theory. Therefore, a simulation tool based on a computational fluid dynamics(CFD) algorithm has been developed to facilitate an optimization of the interrupter. Special attention has been paid to the supersonic flow phenomena between contacts and the observation of hat-gas flow for estimating the breaking performance. However, there are many difficult problems in calculating the flow characteristics in a GCB such as shock wave and complex geometries, which may be either static or in relative motion. Although a number of mesh generation techniques are now available, the generation of meshes around complicated, multi-component geometries like a GCB is still a tedious and difficult task for the computational fluid dynamics. This paper presents the CFD program using CFB-CAD integration technique based on Cartesian cut-cell method, which could reduce researcher's efforts to generate the mesh and achieve the accurate representation of the geometry designed by a CAD tools.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.59-63
• /
• 2005

The 800-kW PM (permanent magnet) synchronous generator is developed as a wind power generator. The matching converter is designed to control the torque and power depending on the wind speed regime. The generator starts to generate the power at the speed of 9 rpm and the rated output is generated at the speed of 25 rpm. The rated output power of an inverter is 750 kW when the PM synchronous generator is delivering 800 kW to the inverter. The inverter is specially designed to perform the maximum power point tracking (MPPT) at the low wind speed regime that is typical wind environment in Korea. The inverter test was done with a 2 MW M-G system at KERI (Korea Electric Research Institute). The M-G set has a 2 MW motor driver and a 38:1 gear to match the speed between the motor and the PM generator. The torque simulating the wind is applied to the PM generator by a DC motor. The test results show the inverter efficiency of $94.3\%$ at the rated power generating condition. The measured values show that the MPPT algorithm is working well. Overall reliability will be verified through the long-term site test.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.732-737
• /
• 2005

Distal 3D Real Object Duplication System(RODS) consists of 3D Scanner and Solid Freeform Fabrication System(SFFS). It is a device to make three-dimensional objects directly from the drawing or the scanning data. In this research, we developed an office type SFFS based on Three Dimensional Printing Process and a industrial SFFS using Dual Laser. An office type SFFS applied sliding mode control with sliding perturbation observer(SMCSPO) algorithm for control of this system. And we measured process variables about droplet diameter measurement and powder bed formation etc. through experiments. Also, in order to develop more elaborate and speedy system for large objects than existing SLS process, this study applies a new Selective Multi-Laser Sintering(SMLS) process and 3-axis dynamic Focusing Scanner for scanning large area instead of the existing $f\theta$ lens. In this process, the temperature has a great influence on sintering of the polymer. Also the laser parameters are considered like that laser beam power, scan speed, scan spacing. Now, this study is in progress to eveluate the effect of experimental parameters on the sintering process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.280-283
• /
• 2005

This study performed by a previous research for the applying expert system to active vibration control algorithm. In order to increase productivity and efficiency, high-speed rotating machines become popular these days. They are likely to vibrate and cause machine failure even though they have small unbalance. Therefore, a high-speed rotating machine needs a balancing technique. ISO 11342 classifies flexible rotors in accordance with their balancing requirements and establishes methods of assessment of residual unbalance. But, even if they finished balancing work, they have harmful effect vibration under the high-speed rotating environment. This vibration effect is very small, but it must be removed for the improvement of the rotor's spin accuracy. This paper introduces a new active control method that remove the exciting force by a phase control. For this method, the high-speed rotating rotor was reconstructed by a flexible rotor model. The forces which excite the rotating system suppose cyclic forces, we obtain the responses by numerical method. And then through the pattern analysis about the vibraton responses, the controler generate the control force with the reverse phase and similar magnitude. This paper suggest an phase control method and shows how to improve the rotating vibration accuracy of the flexible rotor dynamics system using phase control method.

• International Journal of Concrete Structures and Materials
• /
• 제7권3호
• /
• pp.225-238
• /
• 2013

In this study, a two-layer feed-forward neural network was constructed and applied to determine a mapping associating mix design and testing factors of cement-nano silica (NS)-rice husk ash ternary blended concrete samples with their performance in conductance to the water absorption properties. To generate data for the neural network model (NNM), a total of 174 field cores from 58 different mixes at three ages were tested in the laboratory for each of percentage, velocity and coefficient of water absorption and mix volumetric properties. The significant factors (six items) that affect the permeability properties of ternary blended concrete were identified by experimental studies which were: (1) percentage of cement; (2) content of rice husk ash; (3) percentage of 15 nm of $SiO_2$ particles; (4) content of NS particles with average size of 80 nm; (5) effect of curing medium and (6) curing time. The mentioned significant factors were then used to define the domain of a neural network which was trained based on the Levenberg-Marquardt back propagation algorithm using Matlab software. Excellent agreement was observed between simulation and laboratory data. It is believed that the novel developed NNM with three outputs will be a useful tool in the study of the permeability properties of ternary blended concrete and its maintenance.

• 한국기계가공학회지
• /
• 제16권2호
• /
• pp.7-15
• /
• 2017

Recently, an electricity sensor system has been installed and operated to prevent failures and accidents by identifying whether a transformer is normal in advance of failure. This electricity sensor system is able to both measure and monitor the transformer's power and voltage remotely and send information to a manager when unusual operation is discovered. However, a battery is required to operate power detection devices, and battery systems need ongoing management such as regular replacement. In addition, at a maintenance cost, occasional human resources and worker safety problems arise. Accordingly, we apply a linear electromagnetic generator using vibration energy from a transformer for an electric sensor system's drive in this research and we conduct optimal design to maximize the linear electromagnetic generator's power. We consider design variables using the provided design method from Process Integration, Automation, and Optimization (PIAnO), which is common tool from process integration and design optimization (PIDO). In addition, we analyze the experiment point from the design of the experiments using "MAXWELL," which is a common electromagnet analysis program. We then create an approximate model and conduct accuracy verification. Finally, we determine the optimal model that generates the maximum power using the proven approximate kriging model and evolutionary optimization algorithm, which we then confirm via simulation.

• 한국항공우주학회지
• /
• 제36권4호
• /
• pp.346-351
• /
• 2008

본 논문에서는 MR 댐퍼를 헬기 착륙장치 완충기에 적용하여 반능동형 헬기 착륙장치 시스템을 설계하고, 헬기 착륙장치의 반능동제어를 수행하였다. MR 유체는 자기장 내에서는 유체의 물성치가 바뀌게 되는 빙햄거동을 시뮬레이션 하여 MR 댐퍼의 성능을 평가하였다. MR 댐퍼 내에서 자기장을 설계하고, 자기장의 변화에 대해 내부감쇠력의 변화를 고찰하고 자기장에 따른 착륙장치의 거동을 평가하였다. 또한 반능동형 헬기 착륙장치에 제어 알고리즘을 적용하여 착륙특성 성능을 해석하였고, 수동계의 착륙특성과 반능동형의 착륙특성을 비교하였다.

• 한국항공우주학회지
• /
• 제30권8호
• /
• pp.133-140
• /
• 2002

본 논문에서는 미사일, 비행체, 잠수함이나 그 외 특수한 환경에서 사용될 실험용 항체에서 사용 가능하도록 실시간 데이터 처리와 장시간 데이터 저장이 가능한 복합 항법 컴퓨터의 구조를 제안한다. 개발된 복합 항법 컴퓨터는 24시간 이상의 오랜 시간동안 운항하면서 항법 센서와 GPS, 속도계나 고도계, 심도계, 경사계 등과 같이 다양한 보조 센서 데이터들을 처리할 수 있으며 외부 충격이나 사고 등에 의하여 저장된 데이터의 손실을 없애기 위하여 기계적인 충격에 강한 테입 저장 장치를 주 저장 장치로 사용하여 시스템의 안정성을 확보한다. 실시간 처리 능력을 위해서 센서 처리를 위한 보조 마이크로 프로세서와 데이터 저장 또는 항법 알고리즘 계산을 위한 주 마이크로 프로세서를 분리하여 400Hz 이상의 샘플링 주기에서도 실시간으로 모든 계산이나 저장 과정을 수행할 수 있다. 또한 주 알고리즘은 임베디드 리눅스(Embedded Linux)에서 동작하도록 구현되었으며 센서 데이터 처리는 IMU 데이터를 기준으로 하여 시각동기를 이루도록 구성한다.