• 제목/요약/키워드: O:N ratio

검색결과 1,444건 처리시간 0.031초

중간단계의 구조적 안정성을 통한 HubWA 단백질의 접힘(folding) 반응 탐색 (Study of HubWA Protein Folding Reaction by Measuring the Stability of Folding Intermediate)

  • 박순호
    • 대한화학회지
    • /
    • 제67권2호
    • /
    • pp.81-88
    • /
    • 2023
  • HubWA 단백질을 모델로 삼아 소수성 아미노산이 folding 반응에 끼치는 영향을 탐색하기 위하여 HubWA에 있는 I와 L을 V로 치환한 변이 단백질의 folding kinetics를 측정하였다. 변이 단백질의 folding kinetics는 HubWA 단백질과 마찬가지로 three-state on-pathway mechanism(U ⇌ I ⇌ N, U는 unfolded 상태, I는 중간단계, N은 native 상태를 의미한다)을 따르는 것으로 나타났다. Folding kinetics 분석을 통하여 three-state 반응의 elementary 반응과 전체 반응의 자유에너지인 ΔGoUI, ΔGoIN, ΔGoUN을 얻었고, 변이 단백질의 자유에너지와 HubWA 단백질의 자유에너지의 차(ΔΔGoUI = ΔGoUI(변이 단백질) - ΔGoUI(HubWA), ΔΔGoUN = ΔGoUN(변이 단백질) - ΔGoUN(HubWA))의 비인 ΔΔGoUI/ΔΔGoUN를 통하여 중간단계가 전체 folding 반응에 끼치는 영향을 각 소수성 잔기 별로 알아볼 수 있었다. HubWA의 입체구조에서 α-helix와 β-sheet가 상호작용하는 소수성 코어에 위치하는 아미노산인 I3, I13, L15, I30, L43, I61, L67을 V로 치환한 변이 단백질의 ΔΔGoUI/ΔΔGoUN 값이 ~0.5로 나타난 점은 이들 아미노산이 중간단계에서 native 상태보다는 느슨하지만 비교적 견고한 구조를 이루는 것으로 해석되었다. HubWA 입체구조에서 α-helix의 아미노말단에 위치하는 I23, 특정 이차구조가 없는 부위에 위치하는 I36, β-strand 5의 카복실말단에 위치하는 L69를 V로 치환한 변이 단백질의 ΔΔGoUI/ΔΔGoUN 값이 0.4 이하로 나타난 것은 이들 아미노산 잔기가 중간단계에서는 비교적 느슨한 구조를 이루다 중간단계에서 native 단계로 진행하는 folding 과정의 후반부에 HubWA의 입체구조에 견고하게 편입되는 것으로 해석되었다. HubWA의 입체구조에서 두 번째 β-strand의 카복실말단에 위치한 V17, 짧은 네 번째 β-strand의 카복실말단에 위치한 L50, 짧은 310-helix의 아미노말단에 위치한 L56이 중간단계에서 서로 상호작용을 하는 점은 이들 아미노산을 V로 치환한 변이 단백질의 ΔΔGoUI/ΔΔGoUN값이 0.8 이상으로 나타난 점을 통하여 알 수 있었다. L50과 L56은 짧은 β-strand와 310-helix를 제외하고 특별한 이차구조가 존재하지 않는 부위(46번째 아미노산 잔기부터 62번째 아미노산 잔기 까지)에 위치하는데, 이들 아미노산이 V17과 더불어 folding 반응의 초기에 견고하게 상호작용을 하는 것은 HubWA단백질이 folding 과정의 초기에 응집체를 형성하는 것을 막아주는 역할을하는 것으로 생각되었다.

춘파초지조성시 질소 및 가리의 분시방밥이 수량 및 식생에 미치는 영향 (Effect of the Split Application Method of Fertilizer Nitrogen and Potassium on the Yield and Botanical Composition in the Spring sowing Pasture)

  • 이혁호;박근제;정연규;이필상
    • 한국초지조사료학회지
    • /
    • 제6권2호
    • /
    • pp.124-130
    • /
    • 1986
  • 본(本) 시험(試驗)은 춘파초지조성시(春播草地造成時) 목초(牧草)의 정착(定着)과 수량(收量) 및 식생변화(植生變化)를 조사(調査)하기 위(爲)하여 조성시(造成時)의 기비량(基肥量)을 2수준(水準)($N:P_2O_5:K_2O=80:200:70$ 및 160:200:140kg/ha), 관리시(管理時)의 질소(窒素) 및 가리(加里) 분시방법(分施方法)을 3수준(水準)(봄 다비(多肥), 균등분시(均等分時), 가을 다비(多肥))으로 하여 분할구법(分割區法) 4반복으로 포장(圃場) 배치(配置)하여 1984년 3월부터 1985년 10월까지 축산시험장(畜産試驗場)에서 실시(實施)하였던 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 총(總) 건물수량(乾物收量)은 조성시(造成時)의 기비수준(基肥水準)이나 관리시(管理時)의 분시방법간(分施方法間)에 대차(大差)없었다. 2.화본과목초(禾本科牧草)의 총(總) 건물수량(乾物收量)은 조성시(造成時) N=160, $P_2O_5=200$$K_2O=140kg/ha$ 시용(施用)한 처리(處理)가 4,854kg/ha로서 보비(普肥)에 비(比)해 16% 증수(增收)되었으며 분시방법간(分施方法間)에는 별차이(別差異)가 없었다. 3. 두과목초(荳科牧草)의 총(總) 건물수량(乾物收量)은 조성시(造成時) 증시(增施)한 구(區)가 보비(普肥)에 비(比)해 23% 감소(減少)되었으며 분시방법간(分施方法間)에서는 봄 다비(多肥)에 비(比)해 균등분시(均等分施)는 3%, 가을다비(多肥)는 9% 감소(減少)되었다. 4. 야초(野草)의 건물수량(乾物收量)은 조성시(造成時)의 기비수준(基肥水準)에는 대차(大差)없었으나 분시방법(分施方法)에서는 봄 다비(多肥)에 비(比)해 균등분시(均等分施)는 6% 감소(減少)되었고 가을 다비구(多肥區)는 11% 증가(增加)되었다. 5. 식생구성비율(植生構成比率)에 있어서 조성시(造成時)의 다비(多肥)는 보비(普肥)에 비(比)해 화본과(禾本科)는 증가(增加)되었고 두과(荳科)는 감소(減少)되었으며 분시방법(分施方法)에 있어서는 균등분시(均等分施)가 비교적(比較的) 양호(良好)하였다. 6. 이상(以上)의 결과(結果)를 종합(綜合)해 볼 때 춘파초지조성시(春播草地造成時)의 목초(牧草) 정착(定着)을 위(爲)한 기비량(基肥量)은 N : 160, $P_2O_5$ : 200 및 $K_2O$ : 140kg/ha가 수량(收量) 및 식생유지면(植生維持面)에서 좋을 것으로 생각되며 분시방법(分施方法)은 균등분시(均等分施)가 좋을 것으로 사료(思料)된다.

  • PDF

Effects of a lipid-encapsulated zinc oxide dietary supplement, on growth parameters and intestinal morphology in weanling pigs artificially infected with enterotoxigenic Escherichia coli

  • Kim, Sung jae;Kwon, Chang Hoon;Park, Byung Chul;Lee, Chul Young;Han, Jeong Hee
    • Journal of Animal Science and Technology
    • /
    • 제57권1호
    • /
    • pp.4.1-4.5
    • /
    • 2015
  • The study was performed to investigate the effect of dietary supplementation of a lipid-encapsulated Zinc oxide on growth parameters and intestinal mucosal morphology piglets born to Duroc-sired Landrace ${\times}$ Yorkshire dams. Twenty-four 30-day-old piglets weaned at 25 days of age were orally challenged with $5{\times}10^8$ colony forming units of enterotoxigenic Escherichia coli (ETEC) K88 and fed one of the four diets for 7 days: (i) a nursery basal diet containing 100-ppm ZnO (referred to as BASAL), (ii) BASAL supplemented with 120-ppm apramycin (referred to as ANTIBIO), (iii) BASAL with 2,400-ppm ZnO (referred to as HIGH), and BASAL containing 100-ppm lipid-encapsulated ZnO (referred to as LE). All piglets were killed at the end of the experiment for histological examination on the intestine. The results showed that the average daily gain (ADG), the villus height: crypt depth (CD) ratio in the ileum, and the goblet cell density of the villus and crypt in the duodenum, jejunum, and colon were greater in the LE-fed group that those of the BASAL (p < 0.05). Fecal consistency score (FCS) and the CD ratio in the ileum were less in the LE-fed group, compared to the BASAL-fed one (p < 0.05). The effects observed in the LE-fed group were almost equal to those of the HIGH-fed group as well as even superior to those of the ANTIBIO-fed group. Taken together, our results imply that dietary supplementation of 100-ppm lipid-encapsulated ZnO is as effective as that of 2,400-ppm ZnO for promoting growth diarrhea and intestinal morphology caused by ETEC infection.

벼 담수직파재배시 Iprobenfos-metconazole(IPM) 처리에 따른 생육과 도복경감효과 (Growth, Lodging Reduction as Affected by Iprobenfos-metconazole(IPM) in Direct-seeded Rice on Flooded Paddy Field)

  • 이계환;최봉수;박종현;우선희;이철원
    • 한국작물학회지
    • /
    • 제58권4호
    • /
    • pp.393-398
    • /
    • 2013
  • 본 연구는 벼 담수직파재배에서 식물생장억제제인 IPM(Iprobenfos-metconazole)을 벼의 출수기 전에 처리함으로 써 벼의 생육과 도복경감효과를 구명하기 위하여 수행하였다. 1. 출수기에 간장은 식물생장억제제를 처리한 구에서 무처리구보다 간장이 단축되는 결과를 보였으며, 출수전 30일에 처리하였을 때 가장 단축효과가 컸고, 하위 4절간의 단축율이 가장 높았다. 2. 출수후 20일에 지엽의 엽색도를 조사한 결과 IPM 처리구는 무처리구에 비하여 높았고, 엽중 질소 농도는 IPM 처리구가 무처리구에 낮았으나 규산 함량은 무처리구에 비하여 높았고, 규산/질소 비율이 증가하였다. 3. 하위 절간(3~4)의 좌절중은 무처리구에 비하여 IPM 처리구가 유의하게 높았으며, 도복지수는 무처리구에 비하여 낮아지는 것으로 조사되었고 포장도복도 크게 경감되었다. 4. 수량 및 수량구성요소를 조사한 결과 IPM 처리구는 무처리구에 비하여 도복이 되지 않아서 등숙률과 천립중이 높아짐으로서 수량 증수 효과가 있었다.

아산만지역 충적점토의 토질특성에 관한 연구(II) (Studies on the Engineering Characteristics of Alluvial Clayey Deposits in the Bay Area of Asan (II))

  • 유능환;유연택
    • 한국농공학회지
    • /
    • 제30권2호
    • /
    • pp.55-66
    • /
    • 1988
  • This study was conducted to investigate the various engineering properties and correlationshops among the soil constants of alluvial clayey deposits distributed in the bay of Asan and their results are summarized as follows : 1. Grain size distribution of soil was consisted of 12 % of clay, 46-73 % of silt, 2-23 % of sand, and as for the consistency characteristics, 26-36 % of liquid limit, 18-21 % of plastic limit and 6-16 % of plastic index, and so the soil belonging to as a lower plastic nonorganic clay, it's specific gravity was 2,66-2.70, and the location on the plastic chart was approximately above the A-line. Z The natural moisture content and unit weight were 30-43 % and 1.76-1.87 g I cm$_3$, respectively, and according to increment of natural moisture content, the unit weight was decreased, and the initial void ratio and degree of saturation were shown of 0,87-1119 and 92- 100 %, most of saturated. 3. Cone resistance value which was shown 2.4 - 6.5 kg / $cm^2$ was a little lower and it was increased with the depth of layer and shown the formular $q_c=0.7_z+1.32$. 4. Unconfined compression strength was about 0.18-0.43kg /$cm^2$, cu, 0.1-0.22kg / $\psi$, $2-6^{\circ}$ under uu-test condition of triaxial, and CCU, 0.08-0.3 kg/cm , $\psi$, $12-18^{\circ}$ under the condition of cu-test. 5. Pre-consolidation load of characteristics of consolidation was 0.4-0.8 kg / $cm^2$, compression index, about 0.17-0.33. 6. Liquid limit and plastic index were incresased with the increment of clay content but most of alluvial clay was appeared as a normal through non-activity clay soil shown more natural moisture content than liquid limit, and their relationship as follows : LL=0.38( cy+54.8), PI=0.836(LL -17.8), PI =0.468(LL -0.48) 7. The initial void ratio presented correlationship of positive among clay content, natural moisture content and liquid limit, and that of reverse with unit weight, and their results as follws : $e_o=0.024(w_n+0.2)$, $e_o=e_o=0.0003c_y+0.0005 LL+0.0151 W_n+\frac{3.58}{r-t}-1.52$ 8. It was shown that the compression index has correlationship of postive among the clay content, liquid limit, plastic index, natural moisture content and initial void ratio, and their relationships as follows ; $c_c=0.44(e_o-0.47)$, $c_c=0.001$

  • PDF

하수처리를 위한 막결합형 $A_2O$공정에서 최적 내부 순환율 및 MLSS 농도에 관한 연구 (A Study on the Optical Internal Recycle Rate and MLSS Concentration of Membrane Coupled $A_2O$ Process for Wastewater Treatment)

  • 김관엽;김진모;김형수;이상백;박유진;배성수
    • 멤브레인
    • /
    • 제15권2호
    • /
    • pp.114-120
    • /
    • 2005
  • 본 연구의 목적은 도시 하수처리를 위한 막결합형 $A_2O$공정에 관해 실제적인 정보를 얻고자 하는 것이다. 공경 $0.25\;{\mu}m$의 평판형 정밀여과막을 공기가 주입되는 호기조에 침지시켜 처리수는 저압으로 여과된다. 인공폐수를 대상으로 최적의 처리수질과 장기운전의 안정성 확보를 위한 내부반송율과 MLSS 농도 등의 최적 운전인자를 산정하고자 하였다. 내부반송은 각각 호기조에서 무산조로 반송한 것을 type 1, 무산조에서 혐기조로 반송한 것을 type 2라고 규정지었다. 플럭스는 15 LMH, type 1을 2Q로 고정하고 실험하였을 때 최적의 운전 조건은 MLSS 농도는 11,000 mg/L, type 2가 IQ로 나타났다. 이때, BOD $COD_{cr}$, T-N, T-P의 제거율이 각각 $97.3\%,\;94.2\%,\;64.0\%,\;63.0\%$로 타 내부반송율보다 효과적이었다.

담배연기의 평가를 위한 새로운 계수 (Quality Indexes for the Evaluation of Cigarette Smoke.)

  • 신영국;노동석;유광근
    • 한국연초학회지
    • /
    • 제3권2호
    • /
    • pp.123-128
    • /
    • 1981
  • For evaluating the cigarette smoke quality of nonblended and commercial cigarettes, four modified smoke quality indexes were deduced from considering the reactivity of the thiol group in cystine (SH value) with the cigarette smoke constituents, and from the maximum limited contents of tar. nicotine, and carbon monoxide for the less harmful cigarettes. These results were discussed with respect to correlation coefficients between the indexes and tar/nicotine ratio which had been known reliable for smoke quality evaluation. Among the three indexes, the SH/[(N/O.6) +($\frac{C+T}{8}$)] index was found to be the most reliable and applicable.

  • PDF

답(畓) 유형별(類型別) 생산력(生產力)과 질소반응(窒素反應) (Productivity and Nitrogen Response of Paddy Soils)

  • 류인수;이승택;박천서;신용화
    • 한국토양비료학회지
    • /
    • 제10권1호
    • /
    • pp.39-48
    • /
    • 1977
  • 전국(全國) 21개소(個所)에서 실시한 수도(水稻)에 대(對)한 질소적량시험(窒素適量試驗) 결과(結果)를 검토(檢討)하여 다음과 같은 결과(結果)를 얻었다. 1. 일반품종(一般品種)의 무질소구(無窒素區)와 질소구(窒素區)의 수량(收量)은 다같이 보통답(普通畓)>사질답(砂質畓)>습답(濕畓)의 순(順)이었고 통일품종(統一品種)에서는 무질소구(無窒素區) 수량(收量)은 사질습답(砂質濕畓)>사질답(砂質畓)>보통답(普通畓)=식질습답(埴質濕畓)의 순(順)이었으나 질소구수량(窒素區收量)은 보통답(普通畓)>사질습답(砂質濕畓)>사질답(砂質畓)>식질습답(埴質濕畓)의 순(順)이었다. 즉 통일품종(統一品種)은 사질답(砂窒畓)에서 무비재배(無肥栽培)의 적응력(適應力)이 높다는 특성(特性)을 보여 주었다. 2. 질소(窒素)의 시비응수(施肥應酬)는 보통답(普通畓)에서는 높고 사질답(砂質畓)과 습답(濕畓)에서는 낮았다. 질소(窒素) 1kg당(當) 정조(精租) 생산효율은 통일품종(統一品種)에서 보통답(普通畓) 16.6, 사질답(砂質畓) 10.5, 습답(濕畓) 8.6~11.4kg/10a이고 일반품종(一般品種)에서는 각각(各各) 12.6, 6.3, 6.6~9.3이었다. 3. 사질답(砂質畓)의 벼는 보통답(普通畓)에 비(比)하여 등숙률(登熟率)(일반품종(一般品種)에서) 또는 등숙율(登熟率)과 천립중(千粒重)(통일품종(統一品種)에서)이 모두 높았다. 보통답(普通畓)에서 질소응수(窒素應酬)가 큰 것은 주로 수수(穗數)의 증가(增加)가 크기 때문이었다. 4. 평균(平均) 질소적량(窒素適量)은 통일품종(統一品種)에서 보통답(普通畓) 19.4, 사질답(砂質畓) 14.6, 습답(濕畓) 11.6~13.4kg/10a이고 일반품종(一般品種)에서는 각각(各各) 15.9, 10.2, 8.7~12.7kg/10a이었다. 5. 보통답(普通畓)에서는 생산력이 높을수록 질소적량(窒素適量)도 높아지는 관계(關係)를 보여 주었으나 사질답(砂質畓)과 습답(濕畓)에서는 그러한 관계(關係)가 없었다. 6. 표토중(表土中) $SiO_2$와 OM함량(含量)에 근거한 질소적량(窒素適量) 결정식(決定式)에서 얻은 값과 포장시험(圃場試驗)에서 얻은 실제(實際) 적량치간(適量値間)에는 차이(差異)가 컸으나 두 값간에는 서로 높은 상관관계(相關關係)가 있으므로 질소결정식(窒素決定式)은 품종(品種)과 토양종류(土壤種類)의 요인등(要因等)을 보정(補正)하여 발전(發展)시킬 필요(必要)가 있을 것이다.

  • PDF

Piezoelectric and Dielectric Properties of Low Temperature Sintered Pb(Mn1/3Nb2/3)0.02(Ni1/3Nb2/30.12(ZrxTi1-x)0.86O3 System Ceramics

  • Yoo, Ju-Hyun;Lee, Sang-Ho
    • Transactions on Electrical and Electronic Materials
    • /
    • 제10권4호
    • /
    • pp.121-124
    • /
    • 2009
  • In this study, in order to develop compositions of ceramics suitable for piezoelectric actuator and ultrasonic vibrator applications using low temperature sintering, multilayer, PMN-PNN-PZT ceramics were fabricated using $Li_2CO_3$ and $Na_2CO_3$ as sintering aids. Their structural, piezoelectric and dielectric characteristics were investigated according to the Zr/Ti ratio. As the Zr/Ti ratio increased, the electromechanical coupling factor $k_p$, and piezoelectric constant $d_{33}$ and the mechanical quality factor $Q_m$ all increased with Zr/Ti ratio and then decreased after the ratio exceeded 50/50. At the ratio of Zr/Ti =49/51 and sintering temperature of $900^{\circ}C$; the density, electromechanical coupling factor $k_p$, dielectric constant ${\varepsilon}_r$ piezoelectric $d_{33}$ constant and mechanical quality factor $Q_m$ all showed the optimum values of 7.900 $g/cm^3$, 0.576, 856, 312 pC/N, 1,326, respectively. These property values are very suitable for multilayer ceramics actuator applications.

Electrical Properties of DC Sputtered Titanium Nitride Films with Different Processing Conditions and Substrates

  • Jin, Yen;Kim, Young-Gu;Kim, Jong-Ho;Kim, Do-Kyung
    • 한국세라믹학회지
    • /
    • 제42권7호
    • /
    • pp.455-460
    • /
    • 2005
  • Deposition of TiN$_{x}$ film was conducted with a DC sputtering technique. The effect of the processing parameters such as substrate temperature, deposition time, working pressure, bias power, and volumetric flowing rate ratio of Ar to N$_{2}$ gas on the resistivity of TiN$_{x}$ film was systematically investigated. Three kinds of substrates, soda-lime glass, (100) Si wafer, and 111m thermally grown (111) SiO$_{2}$ wafer were used to explore the effect of substrate. The phase of TiN$_{x}$ film was analyzed by XRD peak pattern and deposition rate was determined by measuring the thickness of TiNx film through SEM cross-sectional view. Resistance was obtained by 4 point probe method as a function of processing parameters and types of substrates. Finally, optimum condition for synthesizing TiN$_{x}$ film having lowest resistivity was discussed.