• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.5
• /
• pp.383-387
• /
• 2002

N-channel metal-ferroelectric-insulator-semiconductor field-effect-transistors (MFISFET's) by using $SrBi_2Ta_2O_9$/Silicon Nitride/Si (100) structure were fabricated. The fabricated devices exhibit comfortable memory windows, fast switching speeds, good fatigue resistances, and long retention times that are suitable for advanced ferroelectric memory applications. The estimated switching time and polarization ($2P_r$) of the fabricated FET measured at applied electric field of 376 kV/cm were less than 50 ns and about 1.5 uC/$\textrm{cm}^2$, respectively. The magnitude of on/off ratio indicating the stored information performance was maintained more than 3 orders until 3 days at room temperature. The $I_DV_G$ characteristics before and after being subjected to $10^11$ cycles of fatigue at a frequency of 1 MHz remained almost the same except a little distortion in off state.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2010.04a
• /
• pp.199-199
• /
• 2010

Polymeric membranes have been widely used to separate gas mixtures, such as $O_2/N_2,\;CO_2/CH_4,\;CO_2/N_2$, and olefin/paraffin. The permeation selectivity is the ratio between composition ratio at the permeate side and composition ratio at the feed side. In addition, the permeation selectivity is a product of solubility selectivity and diffusivity selectivity. We present a novel idea and describe its experimental result, which was achieved by preparing polymer gel films that included a room temperature ionic liquid (RTIL) in a polymer matrix. It is known that $CO_2$ can dissolve easily in imidazolium-based RTILs. We prepared polymer-ionic liquid gel films using an ionic liquid, 1-ethyl-3-methylimidazolium acetate ([emim] acetate, C-tri) and a host polymer, poly (vinyl acetate) (PVAc, Aldrich).

• Journal of the Korean Chemical Society
• /
• v.17 no.1
• /
• pp.47-52
• /
• 1973

Korean bentonite was treated with aqueous NaOH solution under the reaction conditions such as concentration of NaOH, 0.5-6N; ratio of $Na_{2}O$ to $SiO_2$, 1-4; reaction time, 2-30 days; reaction temperature, $70^{\circ}C-90^{\circ}C$. The products were examined by X-ray diffraction patterns. When it was treated with 2N NaOH at $70^{\circ}C$, zeolite species $P_1$ was formed with good yield. In higher concentration and at higher temperature than above, zeolite species $P_1$ was converted to hyeroxysodalite. Together with these crystals, some faujasite type zeolite, sodium A zeolite, mordenite type zeolite etc. was formed depending upon reaction conditions.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3297-3300
• /
• 2010

In this study, the 3D-QSARs (three-dimensional quantitative structure-activity relationships: CoMFA and CoMSIA) between structural changes of N-phenyl-O-phenylthionocarbamate analogues (1-30) and their fungicidal activities against the capsicum phytophthora (Phyophthora capsici) fungi were analyzed, then considered quantitatively in terms of minimum structural requirements for fungicidal evaluation. The statistical qualities ($r^2_{cv.}$ = 0.510 and $r^2_{ncv.}$ = 0.948) of the optimal CoMFA 1 model are improved over the other models in the conditions of field combinations, and the two alignments. In the optimal CoMFA 1 model, relative contribution percentages of the CoMFA field were: steric field, 52.3%; electrostatic field, 37.8%; hydrophobic field, 9.9%. Results were similar for the CoMFA 2 model. Therefore, the steric field of the analogues had the highest contribution ratio for fungicidal activity. Specifically, with the contour map of steric fields, the fungicidal activity increased when bulky steric Y-substituents were introduced to the meta-position on the N-phenyl ring and small steric Y-subsituents were introduced to its para-position.

• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.17-22
• /
• 2007

The NOx emission characteristics with oxygen enrichment in non-premixed counterflow flames were investigated numerically. To consider systematically the situation of inevitable $N_2$ contamination by air infiltration in the process of pure-oxygen combustion, the volume ratio of $O_2$ in an oxidizer was changed from 21% to 100%. As a result the NO emission index $(EI_{NO})$ has the highest value under condition of 75% oxygen enrichment. This result can be explained by the change of $N_2$ destruction rate with oxygen enrichment rather than flame temperature, flame thickness and residence time. In particular, it was found that the reaction of N+NO=$N_2+O$ has the largest contribution on NOx production in oxygen-enrichment flames.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.145-147
• /
• 2000

The secondary electron emission coefficient y of MgO single crystal according to the gas mix-ture ratio of Xe, $N_2$ to Ne have been investigated by $\gamma$-focused ion beam system. It is found that the MgO single crystals of (111) crystallinity has the highest $\gamma$ for operating Ne(Xe) ions ranging from 50eV to 200eV throughout this experiment. And it is found that the $\gamma$ for gas mixtures are much smaller than pure Ne ions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.4
• /
• pp.293-297
• /
• 2010

We have studied the optical and electrical properties of a-IGZO thin films on the n-type semiconductor fabricated by RF magnetron sputtering method. The ceramic target was used in which $In_2O_3$, $Ga_2O_3$ and ZnO powder were mixed with 1:1:2 mol% ratio and furnished. The RF power was set at 25 W, 50 W, 75 W and 100 W as a variable process condition. The transmittance of the films in the visible range was above 80%, and it was 92% in the case of 25 W power. AFM analysis showed that the roughness increased as increasing RF power, and XRD showed amorphous structure of the films without any peak. The films are electrically characterized by high mobility above 10 $cm^2/V{\cdot}s$ at low RF power, high carrier concentration and low resistivity. It is required to study further finding the optimal process condition such as lowering the RF power, prolonging the deposition ratio and qualification analysis.

• Tuberculosis and Respiratory Diseases
• /
• v.68 no.3
• /
• pp.162-167
• /
• 2010

Background: To date, there are few data on the risk factors for severe cases and deaths associated with the 2009 pandemic H1N1 influenza A. Here, we describe the clinical and epidemiologic characteristics of patients hospitalized for pneumonia and identify those factors associated with the development of major complications (MC). Methods: We reviewed the medical records of 41 cases of pneumonia admitted to a university-affiliated tertiary hospital between Aug 26 and Dec 10, 2009, and who had confirmed H1N1 influenza A based on real-time reverse transcriptase-polymerase-chain-reaction assay. There were 7,962 patients that fit these criteria. We compared the clinical features and demographic characteristics of patients who developed MC to with those who did not develop MC. Results: During the study period, 10 patients developed MC (required admission to the intensive care unit, n=10; required ventilator therapy, n=6; death, n=4). Patients with MC were significantly older than those without MC and more frequently had underlying medical conditions (90.0% vs 41.9%, p-value <0.01). In the patients with developed MC, the median $PaO_2/FiO_2$ ratio of 230.0 (145.0~347.3) at admission and pneumonia severity index (PSI) score of 141.5 (88.3~158.5) were higher than patients without MC. However, no differences were observed in laboratory findings or in viral shedding between the 2 groups. Conclusion: In hospitalized pneumonia patients of 2009 H1N1 influenza, old age, a history of malignancy, initial hypoxemia, $PaO_2/FiO_2$ ratio, and PSI score appear to be risk factor significantly related to developing MC. These findings might be the basis to influence strategies for admitting patients to an intensive or intermediate care unit and for pre-emptive antiviral therapy.

• Composites Research
• /
• v.22 no.5
• /
• pp.15-23
• /
• 2009

The lubricant tribological characteristics of $Al_2O_3$ fiber and SiC particle hybrid metal matrix composites (MMCs) fabricated by squeeze casting method was investigated using a pin-on-disk wear tester. The wear tests of the MMCs were performed according to fiber/particle hybrid ratio in the planar-random (PR) and normal (N) orientations sliding against a counter steel disk at a fixed speed and $25\;kg_f$ loading under different sliding distances and temperatures. The test results showed that the wear behavior of MMCs varied with fiber orientation and hybrid ratio. At room temperature, the lubricant wear behavior of F20P0 unhybrid PR-MMCs was superior to that of N-MMCs while the hybrid composites exhibited the reverse lubricant wear behavior. It was also revealed that the wear resistance of PR-MMCs was superior to that of the N-MMCs due to the joint action of reinforcements and lubricant film between the friction surfaces at an elevated temperature of $100^{\circ}C$ for both fiber only and hybrid cases. In case of $150^{\circ}C$, although the trend of weight loss was similar to that of others, the wear resistance of PR-MMCs was better than that of N-MMCs for hybrid MMCs.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.6
• /
• pp.106-114
• /
• 2002

In this study, the results of a series of consolidation test for undisturbed Ariake clay in Japan were analyzed by three methods, e-log p (e: void ratio, p: consolidation pressure), log e-log p and n-log p (n: porosity). Moreover, the characteristics of each analysis method were studied. For undisturbed Ariake clay, the log o-Log p and the n-log p relationships can be found as two groups of straight lines of different gradients, but both the elastic consolidation and plastic consolidation regions of e-log p relationship are expressed as a curve. In this paper, the porosity of consolidation yield n$\_$y/, consolidation yield stress p$\_$y/, and the gradient of the plastic consolidation region C$\_$p/ were represented by the log e-log p method, and n$\_$c/, P$\_$cn/ and C$\_$cn/ were represented by the n-log p method. The meaning and the relationships of each value were studied, and the interrelationships among compression indices i.e. C$\_$cn/, C$\_$p/ and C$\_$c/ are obtained from each analysis method as a function of initial porosity n$\_$0/.