• The Korean Journal of Mycology
• /
• v.25 no.3 s.82
• /
• pp.202-208
• /
• 1997

In this study, we evaluated the use of RAPD method to discriminate among strains of Fusarium species including F. oxysporum and f. sp. of F. oxysporum. As a result of the amplication, fifteen primers showed total 180 bands ranging from 0.2 to 3 Kb. Among those 180 bands, 126 polymorphic bands were used for bionominal matrix code (0, 1), and UPGMA dendrogram analysis. Fusarium oxysporum isolate 355 showed high similarity with F. oxysporum isolate 358 at 0.9603. Fusarium roseum isolate 87 and F. oxysporum isolate 358, F. o. f. sp. lycopersici isolate 69 and F. o. f. sp. melongena 68 showed low similarity of 0.3809. Fusarium oxysporum isolate 361 and F. o. f. sp. raphani isolate 218 showed similarity of 0.8730, F. oxysoprum isolate 354 and unidentified Fusarium sp. isolate 228 showed similarity matrix of 0.7936, and F. roseum isolate 87 and F. o. f. sp. raphani isolate 57 showed similarity matrix of 0.5873.

• 전기의세계
• /
• v.28 no.3
• /
• pp.8-15
• /
• 1979

근래 우리나라의 전력수요가 급격히 증가함에 따라 특히 대도시의 전력에너지 공급면에서 안전성, 신뢰성이 좋은 초고압 O.F.케이블이 많이 사용되게 되었다. 그간 수입에만 의존하여 오던 O.F케이블을 대한전선에서 개발 공급함에 따라 O.F 케이블의 설계및 케이블 특성에 대하여 간단히 소개하고자 한다.

• 전기의세계
• /
• v.37 no.10
• /
• pp.39-45
• /
• 1988

당사의 초고압 전력케이블은 1978년 국내 최초로 154KV O.F케이블을 실용화한 이래, 해외로부터의 기술 도입과 이를 계량발전시킴으로써 현재는 초고압 케이블의 전 분야에 걸쳐 세계적, 최선진 기술수준에 이르게 되었다. 본 내용에서는 초고압 전력케이블의 주류인 O.F 케이블에 대하여 당사의 개발현황 및 향후 O.F 케이블 관련기술전망에 대하여 기술하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.412-412
• /
• 2014

Zinc oxide (ZnO) is one of the most powerful materials for purifying organic pollutants using photocatalytic activity. In this study, we have introduced a novel method to design highly photoreactive flexible 3 dimensional (3D) ZnO nanocomposite [F-ZnO-m (m: reaction time, min)] by electrospinning and simple-step ZnO growth processing (one-step ZnO seed coating/growth processing). Significantly, the F-ZnO-m could be a new platform (or candidate) as a photocatalytic technology for both morphology control and large-area production. The highest photocatalytic degradation rate ([k]) was observed for F-ZnO-m at 2.552 h-1, which was 8.1 times higher than that of ZnO nanoparticles (NPs; [k] = 0.316 h-1). The enhanced photocatalytic activity of F-ZnO-m may be attributed to factors such as large surface area. The F-ZnO-m is highly recyclable and retained 98.6% of the initial decolorization rate after fifteen cycles. Interestingly, the F-ZnO-m samples show very strong antibacterial properties against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) after exposure to UV-light for 30 min. The antibacterial properties of F-ZnO-m samples are more effective than those of ZnO NPs. More than 96.6% of the E. coli is sterilized after ten cycles. These results indicate that F-ZnO-m samples might have utility in several promising applications such as highly efficient water/air treatment and inactivation of pathogenic microorganisms.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.270.1-270.1
• /
• 2013

Zinc oxide (ZnO) is one of the most powerful materials for purifying organic pollutants using photocatalytic activity. In this study, we have introduced a novel method to design highly photoreactive flexible 3 dimensional (3D) ZnO nanocomposite [F-ZnO-m (m: reaction time, min)] by electrospinning and simple-step ZnO growth processing (one-step ZnO seed coating/growth processing). Significantly, the F-ZnO-m could be a new platform (or candidate) as a photocatalytic technology for both morphology control and largearea production. The highest photocatalytic degradation rate ([k]) was observed for F-ZnO-m at 2.552 h-1, which was 8.1 times higher than that of ZnO nanoparticles (NPs; [k] = 0.316 h-1). The enhanced photocatalytic activity of F-ZnO-m may be attributed to factors such as large surface area. The F-ZnO-m is highly recyclable and retained 98.6% of the initial decolorization rate after fifteen cycles. Interestingly, the F-ZnO-m samples show very strong antibacterial properties against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) after exposure to UV-light for 30 min. The antibacterial properties of F-ZnO-m samples are more effective than those of ZnO NPs. More than 96.6% of the E. coli is sterilized after ten cycles. These results indicate that F-ZnO-m samples might have utility in several promising applications such as highly efficient water/air treatment and inactivation of pathogenic microorganisms.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.162-167
• /
• 1998

$SiO_xF_y$ optical thin films of lower refractive indices than glass substrates were fabricated by the CF$_4$ ion beam assisted deposition method and the optical, structural and chemical properties of them were investigated. Refractive index of $SiO_xF_y$ films was varied from 1.455 to 1.394 by decreasing the anode voltage or from 1.462 to 1.430 by increasing the current density of end-Hall ion source. FT-IR and XPS analyses show that as the F concentration increases, the Si-O bond at $1080m^{-1}$ shifts to higher wavenumber, the OH bonds are reduced drastically, and the fluorine atoms at the air-film interface are desorbed out by reacting with $H_2O$ in the atmosphere. $SiO_xF_y$ thin films are amorphous by the XRD analysis and have the compressive stress below 0.3 GPa. As an application of $SiO_xF_y$ thin films a two-layer antireflection coating was fabricated using a $SiO_xF_y$ film as a low refractive index layer and a Si film as an absorbing one.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.363-364
• /
• 2005

LTCC(low temperature co-fired ceramics)용 glass/ceramic 복합체를 제조하기 위해 3종류 의 glass를 선정하고 filler로 $Al_2O_3$ 와 $TiO_2$를 사용하여 glass frit에 따른 소결 및 유전 특성에 대하여 조사하였다. Glass frit은 lead-borosilicate(PBS), zinc-borosilicate(ZBS), bismuth-borosilicate(BBS) glass 조성을 사용하였고 1100~$1400^{\circ}C$에서 melting시킨 후 quenching하여 frit화하였다. $Al_2O_3$와 $TiO_2$ filler에 10~50 vol%로 glass frit을 각각 혼합한 후 600~$950^{\circ}C$에서 2시간 동안 소결한 결과 50 vol% glass frit 일 때 $900^{\circ}C$ 이하에서 소성이 가능하였다. 유전특성은 $900^{\circ}C$에서 $Al_2O_3$-50vol%PBS($\varepsilon_{r}$=8.8, $Q{\times}f_o$=4,900, $\tau_f$=-24), $Al_2O_3$-50vol% ZBS($\varepsilon_{r}$=5.7, $Q{\times}f_o$=17,800, $\tau_f$=-21), $Al_2O_3$-50vol%BBS($\varepsilon_{r}$=11.1, $Q{\times}f_o$= 2,080, $\tau_f$=-48), $TiO_2$-50vol%PBS($\varepsilon_{r}$=18.6, $Q{\times}f_o$=3,800, $\tau_f$=+135), $TiO_2$-50vol%ZBS($\varepsilon_{r}$=36.4, $Q{\times}f_o$= 7,500, $\tau_f$=+159), $TiO_2$-50vol%BBS($\varepsilon_{r}$=56.4, $Q{\times}f_o$=520, $\tau_f$=+119)을 나타내었다. 따라서 LTCC용 기판재료 및 마이크로파 유전체로 응용이 가능한 것으로 확인되었다.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.181-184
• /
• 2003

ZnwO₄는 높은 품질계수에 의해 주파수 선택성이 뛰어나지만 다층형태의 고주파 무선부품으로의 응용을 위해서는 높은 소결온도(1100℃), 큰 음의 공진주파수 온도계수(-70ppm/℃), 낮은 유전율(15.5) 둥에 대한 보정이 필요하다. 본 연구에서는 ZnwO₄에 TiO₂ 및 LiF를 첨가하여 ZnwO₄의 저손실특성을 유지하면서 주파수 온도안정성 및 저온소결성을 부여하고자 하였다. 큰 양의 공진주파수 온도계수(＋400ppm/℃) 및 유전율(100)을 갖는 TiO₂의 첨가는 공진주파수 온도계수를 음의 값에서 양의 값으로 변화시켰으며 유전율의 증가를 가져왔다. TiO₂를 20 mol％ 첨가한 경우 공진주파수 온도 계수가 0에 가깜고 유전율 19.4에 품질계수 50000㎓의 특성을 얻을 수 있었으나 소결온도는 1100℃로 높은 소결온도를 보였다. ZnwO₄에 TiO₂가 첨가된 혼합체에 LiF의 첨가는 액상형성에 의해 소결온도를 1100℃에서 850℃로 크게 저하시킬 수 있었다. LiF는 첨가는 LiF 자체의 큰 공진주파수 온도계수에 의해 온도계수를 음의 값으로 변화시켰다. 따라서 TiO₂ 및 LiF의 적당량의 첨가는 온도 안정성을 갖는 저손실 ZnwO₄-TiO₂-LiF계 LTCC 소재를 제조할 수 있었다.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.758-763
• /
• 2001

This paper presents twin spray characteristics of two impinging F-O-O-F type injectors in which fuel and oxidizer impinge on each other to atomize under the various conditions. The droplet size and velocity in the impinging spray flow field were measured using a PDPA. The droplet size and velocity were investigated at mixture ratios of 1.5, 2.0, 2.47 and 3.0 for four injectors in which two single F-O-O-F injectors were arranged at intervals of 20.8, 31.2, 41.6 and 62.4mm respectively. In general, the arithmetic mean diameter, SMD and standard deviation of droplet size in the interaction area (X=0 and Y=0mm) were smaller. The axial velocity in the interaction area was slightly higher. Considering the behavior of impinged droplets using the We number calculated by using the axial velocity instead of the relative velocity in line C in Fig. 1(b) for four injectors, it is consumed that the We number over 500 had the possibility to disintegrate, and the We number below 500 had it to cohere after impingement of twin spray. The results of this study can be used for the design of a nozzle for liquid propellant rockets.

• Journal of the Korean Ceramic Society
• /
• v.37 no.6
• /
• pp.552-558
• /
• 2000

LiMn2O4 thin fiolm cathodes for Li-ion secondary battery were fabricated by r.f. magnetron sputtering technique. As-deposited films were amorphous. A spinel structure could not be obtained LiMn2O4 films by in-situ thermal annealing. After post thermal annealing over $700^{\circ}C$ in oxygen atmosphere, LiMn2O4 films prepared above 100 W r.f. power could be crystallized into a spinel structure. The electrochemical property of the LiMn2O4 film cathodes was tested in a Li/1 M LiClO4 in PC/LiMn2O4 cell. From cyclic voltammetry at scan rate of 2mV/sec of 2.5~4.5V, LiMn2O4 electrode prepared by post annealing at 75$0^{\circ}C$ showed good initial capacity. LiMn2O4 electrode prepared by post annealing at 80$0^{\circ}C$ showed the best crycling performance.