• The Plant Pathology Journal
• /
• 제25권4호
• /
• pp.422-428
• /
• 2009

Studies were conducted to identify the sources of resistance in mungbean recombinant inbred lines (RILs) in Thailand against mungbean yellow mosaic disease (MYMD). 146 mungbean RILs in $F_8$ series were evaluated in a field including resistant parent NM-10-12-1 and susceptible parent KPS 2 during summer 2008 under high inoculum pressure. The RILs were subsequently scored for disease symptom severity ratings (DSSR) using a new scale. Observations regarding DSSR and % disease index (%DI) showed that the tested RILs responded differently to the disease. A large number of RILs (132) were found highly susceptible, 12 were susceptible, 3 were tolerant and one was resistant. Overall screening results showed that three RILs, viz. line no. 30, 100 and 101 had minimum DSSR and % disease index thus they are good source of resistance to MYMD in spite of high disease pressure and can therefore be used directly as varieties to manage the disease in Thailand.

• 한국미생물·생명공학회지
• /
• 제28권3호
• /
• pp.161-166
• /
• 2000

Monilinia fructicola에 의해 감염되어 미이라화된 복숭아 열매로부터 Monilinia fructicola에 강한 항진균성 물질 chitinase 및 urease을 분비하는 방선균을 분리하였다 선발된 TH-04 균주는 배양적 .형태적 특성 세포벽 성분 및 세포내 당 성분을 분석한 결과 전형적인 Streptomyces속에 속하는 방선균으로 동정되었다. TH-04 균주는 Monilinia fructicola Colletotrichum gloeosporioides Magnaporthe grisea Rhizoctonia solani, Phytophthora capsici, Alternaria kikuchi-ana, Fusarium solani 및 Fusarium oxysporum 등 8종의 식물병원균에 대하여 항진균 활성을 나타냈다. 항생물질 생산을 위한 배양조건은 온도 $20^{\circ}C$, pH 7 및 배양기간 7일로 확인되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.454-455
• /
• 2008

태양전지의 효율은 실리콘 자체의 특성에 의해서 결정 되거나 완성된 실리콘을 통해 태양전지를 제조하는 과정에서 웨이퍼의 두께와 도핑 농도의 조절을 통해 효율을 변화 시킬 수 있다. 높은 효율을 갖는 태양전지 설계를 위해 태양전지 시뮬레이터인 AFOS HET 프로그램을 이용하여 태양전지 웨이퍼 두께와 acceptor의 도핑 농도를 조절하였다. 최적화 결과 80nm ZnO, $300{\mu}m$ c-Si(p), 1nm a-Si(i), 1nm a-Si(n), $1{\mu}m$ Ag, acceptor의 도핑 농도 $7\times10^{16}cm^{-3}$ 에서 $V_{oc}$=697.7mV, $J_{sc}$=42.15mA/$cm^2$, $P_{max}$=0.0247W/$cm^2$, FF=83.51%, Eff=24.56%의 고효율을 얻을 수 있다. 본 연구를 통하여 태양전지 설계나 제조 시에 연구비를 절감할 수 있고 높은 효율의 태양전지로 접근할 수 있다.

• 한국안전학회지
• /
• 제16권3호
• /
• pp.68-75
• /
• 2001

Photopolymerization, the utilization of electromagnetic radiation(or light) as the energy source for polymerization of functional monomers, oligomers is the basis of important commercial processes with broad applicability, including photoimaging and RV curing of coatings and inks. The objective of this study is to investigate the characteristics of environmental fraternitive photopolymerization of methyl methacrylate(MMA). This work is the first step to continue further research about alkyl methacrylate. The experiment was done in aqueous solution under the influence of photo-initiator concentration(0.05-0.25mol/l), light intensity (5000-9000 ${\mu}J/cm^2$) and monomer concentration(2-6mol/l). Methyl methacrylate was polymerized to high conversion ratio using hydrogen peroxide($H_2O_2$) and the kinetics model we have obtained is as follows. $R_p=k_p[S]^{0.41}[M]^{0.62}[L]^{2.45} exp(53.64/RT$). The differential method of thermogravimetric analysis(Friedman method) was used to obtain value of activation energy on decomposition reaction. The average value of it res 45.4Kca1/mol.

• 환경위생공학
• /
• 제19권2호
• /
• pp.15-22
• /
• 2004

Yellow loess, Tidal plat sediment, and mud are blown to be high in adsorption though they have great distinction according to the ratio of clay minerals content and their kinds. Thus one of the samples for this study can be obtained by drying of Yellow loess, Tidal plat sediment, and the mud which is semifinished products that are from the progress of heat treatment and making homogeneity which can be found everywhere in our county. Another sample can be prepared by reducing pollutants with the adsorbent and by homing heavy metals of their on. With the samples, noxious heavy metals such as Pb, Cd, and essential trace elements such as Cu, Fe, Mn by each concentration is tested for adsorption according to pH, the kinds of adsorbents and the amount of injection. With the help of these steps, this study shows that the adsorbents, which are green, reducing the additional pollution and low in price, can be found. It also shows that the optimal condition for removing pollutants can be found and the basic materials for treating water can be offered. The results were as follows ; Yellow loess shows the rates of adsorption by more than 50% and Tidal plat sediment and Mud show it by more than 90%. Thus Tidal plat sediment and Mud are higher than Yellow loess the rates of adsorption. The pH should be treated in natural condition because the rates of adsorption of Pb, Cd, Cu, Mn excepting Fe in mud is higher in pH 7 than in pH 3 of Yellow loess, Tidal plat sediment, and Mud. The drying adsorbents are good to use because the rates of adsorption of heavy metals has tendency to be higher in the drying method than in the burning method. It is considered that the more the mont of the injection of the adsorbent is , the higher the rates of adsorption is, and one gram is reasonable for the amount of the injection of Tidal plat sediment and mud. Yellow loess is suitable for the treatment of the water that includes low concentration of heavy metals because it has the lower rate of adsorption as the concentration of noxious heavy metals is higher. It is thought that Tidal plat sediment and Mud is proper for the treatment of the water that includes high concentration of heavy metals because the rates of adsorption has not been changed as the concentration of heavy metals increases.

• Journal of Periodontal and Implant Science
• /
• 제33권2호
• /
• pp.301-310
• /
• 2003

The purpose of this study is to evaluate the biocompatibility and the biorsorbability of several types of calcium polyphosphate made through change of manufacturing process for 12 month. To solve limitation of calcium phosphate, we developed a new ceramic, Calcium Polyphosphate(CPP), and report the biologic response to CPP in extraction sites of beagle dog. Porous CPP blocks were prepared by condensation of anhydrous $Ca(H_2PO_4)_2$ to form non-crystalline $Ca(PO_3)_2$ and then milled to produce CPP powder. CPP powder, CPP block, and CPP granules added with $Na_2O$ were implanted in extraction sockets and histologic observation were performed at 12 months later. Like 3 months results, histologic observation at 12 months revealed that CPP matrix were mingled with and directly apposed to new bone without any adverse tissue reaction, CPP powder show direct bony contact, but new bone formation and fibrous tissue encapsulation showed in CPP block. 10% $Na_2O$ CPP granules show more inflammatory cells infiltration around graft materials compared at 3 month, but 15% $Na_2O$ CPP granules show less. This result revealed that regardless of addition of $Na_2O$, CPP had a high affinity for bone and had been resorbed slowly. From this results, it was suggested that CPP is promising ceramic as a bone substitute and addition of $Na_2O$ help biodegradation but optimal concentration of $Na_2O$ and other additive component to increase degradation rate should be determined in further study.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3808-3815
• /
• 2021

In this paper, the EPICS2017 photoatomic database was used to evaluate the photon mass attenuation coefficients and buildup factors of soils collected at different depths in the Philippine islands. The extraction and interpolation of the library was accomplished at the recommended linear-linear scales to obtain the incoherent and total cross section and mass attenuation coefficient. The buildup factors were evaluated using the G-P fitting method in ANSI/ANS-6.4.3. An agreement was achieved between XCOM, MCNP5, and EPICS2017 for the calculated mass attenuation coefficient values. The buildup factors were reported at several penetration depths within the standard energy grid. The highest values of both buildup factor classifications were found in the energy range between 100 and 400 keV where incoherent scattering interaction probabilities are predominant, and least at the region of predominant photoionization events. The buildup factors were examined as a function of different soil silica contents. The soil samples with larger silica concentrations were found to have higher buildup factor values and hence lower shielding characteristics, while conversely, those with the least silica contents have increased shielding characteristics brought by the increased proportions of the abundant heavier oxides.

• 한국작물학회지
• /
• 제38권4호
• /
• pp.350-359
• /
• 1993

수도 여절편의 단백질함량 감소는 KCI처리에 의해 촉진된다. 본 연구는 KCI이 증가 시키는 단백질 분해작용을 더욱 촉진시키기 위한 시도의 하나로 GA$_3$와 ABA를 KCI과 혼합처리한 다음, 이들이 노화엽의 단백질 분해작용을 조절하는 기작을 구명하기 위하여 수행하였다. 파종후 16～18일된 실행의 제2본엽을 5cm 길이로 잘라 test 용액에 배양하는 8일간 단백질, aminotks, 흡수량, 단백질 분해효소의 활성과 단백질 분해산물인 aminotks의 유출량 변화 드을 조사하였다. 1. GA$_3$ 단독처리는 잎의 단백질 감소에 큰 영향을 미치지 않았고, KCI과 혼합처리되어도 KCI 단독처리와 비교할 때 유의적인 변화를 유기하지 않았다. 그러나 ABA 단독처리는 단백질분해, amino산의 유출 및 endoproteinase 활성을 현저히 증가시켰고, ABA와 KCI의 혼합처리는 이들의 증가에 상조적이었다. 2. KCI은 Rubisco를 분해하는 exoproteinases의 활성을 감소시키는데 반해 GA$_3$나 ABA 첨가는 모두 이의 감소를 완화시키는 효과가 있었다. 그러나 KCI이 처리된 잎의 endoproteinase 활성은 ABA와의 혼합처리에 의해서만 상조적인 증가를 나타내어 이러한 효과가 없는 GA$_3$와는 그 기능이 대조적이었다. 3. 배양기간중 잎의 흡수량이 낮을수록 단백질 감소량이 많고 그 속도도 빨랐다. ABA와 KCI의 혼합처리로 단백질이 가장 많이 감소하였던 잎의 흡수량이 가장 낮아, 단백질 분해작용과 흡수률 사이에 깊은 관련이 있음을 시사하였다. 4. 따라서 KCI에 의한 수도 엽절편의 단백질분해촉진은 endoproteinases 활성과 감소 등에 그 원인이 있고, ABA는 이러한 변화에 상조적으로 작용하나 GA$_3$는 큰 영향이 없음을 알 수 있었다.다.e 및 free fatty acid) 는 13.3～17.4%로 나타났다.로 빠른 시일에 집중적인 연구가 필요하다고 본다.다. 4. 저온저장(4$^{\circ}C$, RH 50%)한 벼는 2년반 저장한 벼도 밥맛의 변화가 거의 없었다. 5. 1988년산 및 1989년산 일반계를 10분도와 12분도로 도정하였을 때 도정도에 따른 밥맛의 차이는 없었다.X>$CoO_x$는 $Co_3O_4$로 존재하고, 반응 전의 경우에는 이와는 다른 chemical state를 보여주었다. XRD 및 XPS 결과를 바탕으로, 촉매표면에 존재하는 $Co_3O_4$의 외부표면이 $Co_2TiO_4$와 $CoTiO_3$ 같은 $CoTiO_x$로 encapsulation되어 있는 모델구조를 제안할 수 있고, 이는 반응시간의 함수로 나타나는 촉매활성에 있어서 전이영역의 존재를 잘 설명할 수 있을 뿐만 아니라, XRD와 XPS에서 얻어진 촉매의 물리화학적인 특성을 잘 반영할 수 있다. 나타냈고, 골격근과 눈 조직에서 피루브산에 대한 LDH의 친화력이 상당히 크므로 LDH가 혐기적 조건에서 효율적으로 기능을 하는 것으로 사료된다.5) and "Cleanliness of clothes ＆ features" (p ＜0.05) of VIP ward were significantly higher than those of a general ward.tive to apply.아울러 고려(考慮)해야 한다. 이것은 고무기술자(技術者)가 당면(當面)해야할 과제(課題)에 속(屬)하며 바람직 한것은 본장(本章)의 내용(內容)이 여러 상황하(狀況下)에서 당면(當面)한 문제(問題)에 대(對)해 어떻게 대처(對處)해 야 할지를 모르는 여러 기술자(技術者)들에게 도움이 되었으면 하는 것이다. 얻어짐을 알았다. 여기서의 합성분말을

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1729-1737
• /
• 2019

This paper presents neutronics design of VVER-1000 fuel assembly using burnable poison particles (BPPs) for controlling excess reactivity and pin-wise power distribution. The advantage of using BPPs is that the thermal conductivity of BPP-dispersed fuel pin could be improved. Numerical calculations have been conducted for optimizing the BPP parameters using the MVP code and the JENDL-3.3 data library. The results show that by using $Gd_2O_3$ particles with the diameter of $60{\mu}m$ and the packing fraction of 5%, the burnup reactivity curve and pin-wise power distribution are obtained approximately that of the reference design. To minimize power peaking factor (PPF), total BP amount has been distributed in a larger number of fuel rods. Optimization has been conducted for the number of BPP-dispersed rods, their distribution, BPP diameter and packing fraction. Two models of assembly consisting of 18 BPP-dispersed rods have been selected. The diameter of $300{\mu}m$ and the packing fraction of 3.33% were determined so that the burnup reactivity curve is approximate that of the reference one, while the PPF can be decreased from 1.167 to 1.105 and 1.113, respectively. Application of BPPs for compensating the reduction of soluble boron content to 50% and 0% is also investigated.

• 한국잡초학회지
• /
• 제10권3호
• /
• pp.207-213
• /
• 1990

Oxyfluorfen(2-chloro-2,2,2-trifluro-p-toyl-3-ethoxy-4-nitrophenyl ether)의 서방형(徐放型) 모형화(模型化)를 위하여 각종(各種) 흡착(吸着) 및 치환형(置換型)2 30종(種)을 만들고 유채를 검정식물(檢定植物)로 하는 in vitro test를 실시(實施)하여 비교적(比較的) 활성(活性)이 높고 지속성(持續性)이 인정(認定)되는 16종제형(種製型)을 선발(選拔)할 수 있었다. 따라서 이들 16종(種)의 제형(製型)을 기존제형(旣存製型) 4종(種)과 병행공시(竝行公試)하여 pot실험(實驗)을 수행(遂行)하였다. 검정식물(檢定植物)로는 물달개비를 사용(使用)하였고, 처리후(處理後) 73일(日)까지 정기적(定期的)으로 제초활성(除草活性)이 변동양상(變動樣相)과 지속성(持續性)을 판단(判斷)한 결과(結果) Polymer 11, Elvan 7/40, Coal slag 7/40, Zeolite (A), Bentonite(A)의 5종(種)을 선발(選拔)할 수 있었다. 이들의 제초활성(除草活性)은 처리후(處理後) 73일(日)까지 무처리대비(無處理對比) 100%에 가까운 Biomass inhibition rate를 보였다.