• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.1-7
• /
• 2006

The dyeing properties of the several reactive dyes possessing different types of the reactive group on nylon 6 fabric have been investigated. Dyeing of nylon fiber with commercial reactive dyes was dependent on the dye bath pH. As pH increased, the extent of exhaustion decreased due to the deprotonation of the amino end group. But, the extent of fixation increased because of the enhanced reactivity with nylon fiber. It was found that all reactive dyes could be applied to nylon 6 reasonably at pH 5-6. But, the conflicting requirements of dye exhaustion and covalent bond formation limited the extent of fixation efficiency. The best method to improve the extent of the fixation efficiency of the reactive dyes was the conversion of sulphatoethylsulphone group to vinylsulphone group before dyeing with trisodium phosphate. The converted Supra type reactive dye gave the highest extent of fixation efficiency, which was about 90%.

• Elastomers and Composites
• /
• 제44권3호
• /
• pp.274-281
• /
• 2009

음이온중합기구으로 나이론 6와 나이론공중합체를 합성하였다. 나이론탄성체는 카프록락탐과 이소시아네이트로 활성화된 폴리올을 음이온중합기구을 통해서 공중합을 하였다. 전기방사공정으로 제조된 나이론과 나이론공중합체는, FE-SEM으로 구조를 분석한 결과, 100$\sim$180 nm의 직경을 갖는 나노섬유들로 이루어진 다공성 부직포였다. DSC와 ATR FT-IR을 이용하여 결정화거동 및 구조를 분석하였다. 인장실험을 한 결과 나이론은 나이론탄성체에 비해서 인장강도는 크고, 신율은 감소된다. 결정영역인 PA블록과 무정형인 PE블록으로 된 나이론공중합체인 나이론 탄성체는 PE블록 비율이 클수록 인장강도는 낮아지고 신율은 증가된다. $O_2$와 $N_2$를 반응기체로 한 상압플라즈마로 전기방사된 나이론과 나이론탄성체의 부직포표면을 개질한 결과, 개질된 부직포표면은 표면개질 전보다 더 친수성을 보였으며 반면에 $CH_4$를 반응기체로 사용한 상압플라즈마로는 부직포표면을 개질하면 부직표면은 소수성을 나타내었다.

• 한국자기학회지
• /
• 제3권1호
• /
• pp.34-40
• /
• 1993

급속냉각기술로 제조된 $Nd_{10.5}Fe_{79}Co_{2}Zr_{1.5}B_{7}$ 합금분말을 사용하여 사출성형용 자성 펠렛을 제조하였다. 입도분포가 다른 두 종류의 분말($38~75\;\mu\textrm{m}$ 및 $75~50\;\mu\textrm{m}$)을 사용하여 열가소성(Nylon 6) 펠렛을 제조한 후 자성분말의 임계분율(critical volume fraction) 을 결정하고 수지자석의 성형밀도에 따른 자기특성을 고찰하였다. Nylon 6 수지를 사용한 Nd-Fe-Co-Zr-B계 펠렛은 분말입도가 $38~75\;\mu\textrm{m}$인 경우 임계 부피분율은 70%로 나타났고, 그때의 성형밀도는 이론밀도 의 90%를 상회 했으나 $75~150\;\mu\textrm{m}$ 분말의 경우는 같은 분율에서 이론밀도의 87% 수준에 머물렀다. 최적의 자기특성은 분말에 윤활제로서 silicone oil만을 0.5wt.% 첨가한 경우이며 이때의 자기특성으로, $(BH)_{max}=5.2\;MGOe,\;B_{r}=5.1\;kG$ 그리고 $_{i}H_{c}=8.8\;kOe$의 높은 수준을 보였다. Nylon 6수지자석의 성형밀도를 예측할 수 있는 경험식으로서, ${\rho}(g/cm^{3})=1.1+K.V_{s}$을 얻었으며 K(5.3~5.6)는 자성분말 입도에 따른 기울기 상수이고 $V_{s}$는 분말의 부피분율이다.

• Elastomers and Composites
• /
• 제45권1호
• /
• pp.2-6
• /
• 2010

탄소섬유/나일론 수지 복합재료의 계면결합력의 향상을 위해 폴리아크릴로니트릴(PAN)계 탄소섬유의 표면에 실란계, 설파이드계, 이미드계 계면결합제를 이용해서 사이징 처리를 수행하였으며, 사이징 처리된 탄소섬유의 젖음성과 표면자유에너지는 접촉각을 통해 확인하였다. 사이징 처리되어 제조된 복합재료의 기계적 계면물성은 임계응력세기인자를 통하여 확인하였으며, 파단실험 후 파단면은 주사전자현미경을 통해 관찰하였다. 실험결과 실란계로 사이징 처리된 탄소섬유가 다른 사이징 처리에 비해 표면자유에너지가 큰 것을 접촉각 측정을 통해 관찰하였다. 한편 사이징 처리된 탄소섬유 강화 나일론 복합재의 경우 미처리 탄소섬유를 이용한 복합재에 비해 높은 기계적 계면강도를 보였다. 이러한 결과는 섬유의 표면자유에너지가 탄소섬유와 나일론6 기지 사이의 계면결합력의 증대를 유도하여 복합재료의 기계적 계면강도가 증가된 것으로 판단된다.

• 한국정밀공학회지
• /
• 제19권3호
• /
• pp.114-122
• /
• 2002

Electric conductivities, mechanical properties and friction properties were investigated far graphite-nylon composites impregnated with oil. Specific resistivity of composites containing oil from 2% to 6% were in the range of $10^7 ~10^6 \ohm$ cm, which were applicable for anti-static purpose of composites improved by the impregnation of graphite with 2%. Improvement in the impact strength and friction properties of graphite/nylon composites was achieved by the impregnation of oil. The coefficient of friction of the composites containing graphite from 2% to 4% and oil with 2 - 4% showed much loller than that of virgin nylon. Also the abrasive wear of the oil impregnated graphite composites were decreased about 1/3 - 1/10.

• 한국염색가공학회지
• /
• 제20권1호
• /
• pp.36-43
• /
• 2008

False twist texturing uses the thermoplastic property of synthetic yarn and produces a bulk and a stretch by giving the filament a permanent crimp. This study investigated the effects of false twist texturing parameters, disk/yarn(D/Y) and heater temperature, on the physical properties of nylon textured yarn. D/Y was a primary determinant of twist numbers of filaments and was proportionally increased with the twist numbers of filaments, resulting in an increase of crimp rigidity of the textured yarn. Heater temperature, a determinant of the heat setting of transformed filaments, was proportionally increased with the increase of crimp rigidity. Nylon 6 was partially melted at $190^{\circ}C$. This study consequently suggested the optimal parameters of nylon 6 85d/68f full-dull POY.

• 한국염색가공학회지
• /
• 제28권4호
• /
• pp.231-238
• /
• 2016

We investigated the evolution of crystal formation as a function of drawing ratio in poly(1,4-diaminobutane-co-adipic acid-co-${\varepsilon}$-caprolactam-co-diethylenetriamine)(nylon 466T) copolymer formed by four monomers, i.e 1,4-diaminobutane, adipic acid, ${\varepsilon}$-caprolactam, diethylenetriamine(DETA), using synchrotron X-ray scattering measurement. In case of pristine(as spun) nylon 466T fiber, it was consisted with unoriented nylon $6{\alpha}$ and unoriented nylon $46{\alpha}$ phases. As increase the drawing ratio, unoriented nylon $6{\alpha}$ was transformed to oriented ${\gamma}$ phase, while unoriented nylon $46{\alpha}$ changed to oriented $46{\alpha}$ phase. The effect of the addition of DETA was not observed in the pristine fibers. However, DETA affected to restrict the formation of crystals at the maximum drawing condition, and as a result it had a role to increase the moisture regain.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.470-473
• /
• 2002

나일론 6은 유연한 분자사슬로 구성된 고분자이지만 분자간에 많은 수소결합을 형성 하고 있기 때문에 비교적 높은 용융온도를 가지고 있으나 연신성이 좋지 않고 고탄성의 섬유를 얻기가 어려우며 상온 및 저온에서의 내충격성도 취약하다고 알려져 있다[1]. 나일론 6의 이러한 단점은 각종 산업용소재로 이용할 경우 많은 문제점을 유발하게 되어 이를 극복하기 위한 연구들이 시도되고 있다. 그중 나일론 6에 액체암모니아나 요드 등을 이용하여 가소화 하거나 용제를 사용함으로써 해결하고자 하는 연구들이 진행되어 왔었다[2,3]. (중략)

• 한국의류산업학회지
• /
• 제18권6호
• /
• pp.878-888
• /
• 2016

In this study, wool/nylon(50/50%) blend yarn and its fabrics for tra-biz(complex word of travel+business) garment were prepared, and its wear comfort characteristics were investigated through thermal manikin and human-body wearing experiment. In addition, tactile wearing performance from fabric mechanical properties and the dimensional stability and the pilling of the fabric specimen during wearing and dry-cleaning were measured and compared with those of wool 100% fabric specimen. Heat keepability of the wool/nylon(50/50%) blend fabric by thermal manikin experiment was superior than that of wool 100% fabric, this result was verified with human-body wearing experiment and its result coincided well with this experimental result. Tactile wearing performance of the wool/nylon(50/50%) fabric from fabric mechanical properties measured by FAST system was better than that of the wool 100% fabric. The dimensional stability of the wool/nylon(50/50%) fabric was more stable than that of the wool 100% fabric. Because relaxation shrinkage was lower and hygral expansion of wool 100% fabric was more high. However, the breathability and pilling property of the wool/nylon(50/50%) fabric were inferior than those of the wool 100% fabric. The possibility of application for tra-biz garment of wool/nylon(50/50%) blend fabric was observed because of good heat keepability, tactile wearing performance and washing fastness.

• 한국염색가공학회지
• /
• 제11권3호
• /
• pp.41-48
• /
• 1999

The removal of hemoglobin from acrylic acid grafted Nylon fabrics has been investigated. In order to change detergency of Nylon 6 fabric, acrylic acid(AA) were graft copolymerized on Nylon fabric using ammonium persulfate(APS) as a initiator, and then acrylic acid grafted Nylon was treated with NaOH solution. The graft ratio increased linearly with increasing acrylic acid concentration. The graft ratio was the highest when the concentration of APS was 0.05%, and it decreased as the concentration of APS increased. The surface of Nylon fabric became rough due to graft. Moisture regain was increased by graft and alkaline treatment, contact angle was also improved compared with the ungrafted. The hemoglobin was easily solubilized and removed from grafted Nylon fabric, while it was difficult to remove hemoglobin from ungrafted Nylon fabric. The effects of graft on removal of hemoglobin was related with increase of moisture regain and transformation of COOH to COONa by alkaline treatment.