• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.501-507
• /
• 2010

In this study, we evaluate the anti-microbiological activity of paraben in eye shadows that are composed of pigments and oil binders using various analytical methods and microbiological tests. Paraben does not show the microbiological activity properly when it was used with Nylon SP$^{(R)}$ 10, Talc RF SSA$^{(R)}$, OMC Talc AS$^{(R)}$ and $BaSO_4$. In the test of fungi, Nylon SP$^{(R)}$ 10 causes the decrease of microbiological activity regardless of the type of oil binders. The pigment of Mango violet also causes the decrease of microbiological activity when ester oil binder was used. Regardless of the type of oil binder, samples containing nylon SP 10, 0.15% of methyl paraben and 0.05% of propyl paraben had not been able to maintain microbiological activity only if the concentration of parabens were increased. Trace amounts of metal ions present in pigments reduced the activity of preservatives by inactivation of hydroxyl group of paraben. It is thought that swollen nylon SP 10 in ester oil increase the absorption or interaction of parabens and swollen nylon powder causes the inactivation of paraben.

• Korean journal of food and cookery science
• /
• v.19 no.4
• /
• pp.439-446
• /
• 2003

This study was performed to investigate the change in the chemical components of red pepper powder using different packaging materials and various storage conditions. Red pepper powders with 11 and 15% initial moisture content were packed with five different materials and stored at different temperatures (0, 20, and 30 C) for a one year period. Over the storage period, each combination was periodically sampled, and examined for composition changes. The five packaging materials were: linear low density polyethylene(LLDPE), nylon/LLDPE(Ny/LLDPE), saran coated ethylene vinyl acetate copolymer/linear low density polyethylene(B650), nylon/Tie/nylon/ethylene-vinyl alcohol copolymer/nylon/Tie/LLDPE(RDX-2787) and oriented polypropylene/alumimum/LLDPE(OPP/Al/LLDPE), and the three storage conditions were (28.3${\pm}$1.0)$^{\circ}C$ with (15.5${\pm}$2.8)% relative humidity, (18.6${\pm}$0.5)$^{\circ}C$ with (46.6${\pm}$4.9)% RH, and (0${\pm}$2)$^{\circ}C$ with (80${\pm}$10)% RH, respectively. The moisture contents of all samples changed according to the relative storage humidity, except those of the samples packed with OPP/Al/LLDPE, which remained constant throughout the storage period. The capsaicinoids content of the red pepper powder did not change significantly for 6 months, but gradually decreased after that until about 85% of the original amount remained at the final stage of storage. The ASTA color values of all samples decreased gradually throughout the storage period. The higher the storage temperature, the more severe the deterioration. The color deterioration seemed greatly related to the existence of oxygen, as the deterioration was especially severe in the samples packed with LLDPE and B650, where the oxygen transmission rate were highest among the five packaging materials.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.8
• /
• pp.1011-1019
• /
• 1998

The natural dyestuff(squid ink) was manufactured from squid ink by boiling in 0.1% NaOH solution and powdering in freeze dryer. Cotton, wool, silk and nylon fabrics were dyed under several conditions using the manufactured squid ink to investigate the dyeability and color fastness. Dyeing was operated in acidic dyebath of pH 4 because the squid ink is anionic. Dyeabilities on wool, silk and nylon fabrics were good, especially silk fabrics were dyed deeper than others because of being amine group. But dyeability on cotton fabrics was low and developed with chitosan treatment. All the dyed fabrics showed excellent in color fastness to crocking and laundering. Also light fastness of them were excellent except nylon. The light fastness of dyed-nylon fabrics was as poor as grade 1, but they could be improved to grade 4 by aftertreatment with gallicacid. Useing the natural dyestuff-squid ink powder, we could execute whenever we want to dye fabrics in the adequate concentration. Dyeabilities were developed according to repeating times of dyeing and the increased dye concentration. We could recycle the wasting sources.

• Journal of Fashion Business
• /
• v.7 no.3
• /
• pp.36-44
• /
• 2003

Chitosan treatment of textile fabrics has been studied to improve fabric characteristics and functions. Natural dyestuffs have been more actively employed in environment-conscious finishing products. In this study, chitosan treated cotton and nylon fabrics were prepared for dyeing with a few natural dyestuffs. These were Caesalpina sappan, Gardenia jasminoides, and cochineal in the form of powder. Hand-related physical and mechanical properties and luster characteristics were examined using the KES-FB series instruments and a set of luster measuring equipment. The chitosan treatment seemed to be more effective in terms of increasing stiffness for cotton fabric. Since cotton fibers have more -OH groups in the molecules, they provide more linkage sites with the chitosan than the nylon 6 fibers do.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.376-376
• /
• 2002

편평분할사는 복합방사법에 의한 편평 단면 형태의 분할형 초극세섬유로서, 기존 오렌지 형태인 Nylon/PET 극세사의 품종 다양화된 형태이다 분할은 Nylon과 PET의 비상용성인 특징을 이용, 물리적인 가공과 화학적인 가공에 의해 이루어지며 기존오렌지 형태의 PET/Nylon극세사에 비해 분할성이 우수하다고 보고되고 있다. 편평분할사의 용도는 Micro powder조의 Suede직물 등의 여성용 의류, 기능성 스포츠웨어, 2차 오염방지성이 우수하여 반도체 등의 정밀산업의 닦음천(Wiping Cloth)등의 크리너(Cleaner)용으로도 사용되어 질 수 있다. (중략)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.6
• /
• pp.92-98
• /
• 2019

In this study, we developed a repair material incorporating PVA powder resin and nylon fiber into cemented carbide used in the existing field to improve adhesion performance and water tightness with existing concrete. Flexural behavior evaluation was performed. The main experimental variables were PVA powder resin, nylon fiber mixing rate and damage type, and performance tests were conducted to evaluate compressive strength and flexural behavior after repairing materials. It was found that all formulations fully satisfied the required performance of the repair material. The flexural strength test results of the repaired tube specimens showed that the performance of the repaired materials was maximized when the nylon fiber was added and the PVA powder was added in an appropriate amount. The flexural behavior of all the specimens showed the flexural behavior of the structural members with a low rebar ratio, suggesting that the amount of iron wire in the domestic fume pipe was somewhat insufficient. That is, it was confirmed that the amount of reinforcement of the steel wire was somewhat small, so that the concrete was cracked before the behavior of the concrete and the steel wire reached the extreme state, and the concrete was immediately destroyed beyond the tensile strength of the concrete.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.05a
• /
• pp.241-252
• /
• 1996

• Journal of Sericultural and Entomological Science
• /
• v.43 no.1
• /
• pp.41-48
• /
• 2001

The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.139.2-139
• /
• 2003

The packaging and irradiation effects on the volatile compounds of red pepper powder were investigated. The red pepper powder (Capsicum annuum) was prepackaged in vacuum (PE/Nylon film bag), and irradiated with the dose of 0, 3, 5 or 7 kGy at 0$^{\circ}C$. The odor of irradiated red pepper powder was classified into 4 groups (0, 3, 5, and 7 kGy) by electronic nose using metal oxide sensors, and the volatile compounds developed by irradiation were analyzed by GC-MS along with solid phase microextraction. Hexanoic acid and tetramethyl pyrazine, which were found in red pepper powder of 0 kGy, disappeared in irradiated red pepper powder. Further, 1,3-bis(1,1-dimethylethyl)-benzene was detected by GC-MS as a new developed volatile compound in irradiated red pepper, and this compound was identified to be originated from packaging material not from red pepper powder. This study showed that off-odor from packaging materials was responsible for the volatiles produced from dried food treated with irradiation.

• Fashion & Textile Research Journal
• /
• v.15 no.2
• /
• pp.286-293
• /
• 2013

This study investigates the attachment of glycyrrhizin to fabric using an X-ray photoelectron spectrophotometer( XPS). XPS spectra analysis showed that carbon content on treated fabrics with 0.2% glycyrrhizin increased to 2.699% for silk, 2.829% for nylon, 1.505% for cotton, respectively. The results show that glycyrrhizin is absorbed on treated fabrics. The glycyrrhizin extraction method makes radix glycyrrhizae powder 10g treat the first and the second treatment with ethanol, remove impurities on $75^{\circ}C$; subsequently, it is treated for 10 hours with ethanol 75% on $85^{\circ}C$ and lyophilizated. As the result, glycyrrhizin is extracted 1.7g in GL-I, 1.1 g in GL-II. As the result of abstracting glycyrrhizin with two methods, pure glycyrrhizin was abstracted 45.9% in GL-I, 74.9% in GL-II. GL-I, GL-II; in addition, glycyrrhizin( Japan) on TLC plate was separated in Rf 0.6. By GL-II extract method, this experiment obtained glycyrrhizin 15 g treated in a bath ratio set to 1: 100. Silk fabric was treated at $80^{\circ}C$, 60 min. in, nylon fabric $10^{\circ}C$, 70 min., and cotton fabric $30^{\circ}C$, 80 min.; subsequently, silk, nylon, cotton fabrics showed a 99.9% antibacterial activity for Staphylococcus aureus and Klebsiella pneumoniae.