• 폴리머
• /
• 제37권1호
• /
• pp.100-112
• /
• 2013

현재 일반화되어 있는 pilot scale의 복합체 생산설비에서 용융 삽입법으로 nylon 66/Cloisite 93A 나노복합체의 상용화 가능성을 확인하였으며, nylon 66에 Cloisite 93A 도입으로 인장 및 굴곡응력에 대한 강도와 탄성률이 향상되었고, 형태학적 및 결정화 거동의 분석을 통해 Cloisite 93A 함량, nylon 66 점도 및 그에 따른 결정화 거동이 주요 영향요소임을 확인하였다.

• Elastomers and Composites
• /
• 제44권3호
• /
• pp.274-281
• /
• 2009

음이온중합기구으로 나이론 6와 나이론공중합체를 합성하였다. 나이론탄성체는 카프록락탐과 이소시아네이트로 활성화된 폴리올을 음이온중합기구을 통해서 공중합을 하였다. 전기방사공정으로 제조된 나이론과 나이론공중합체는, FE-SEM으로 구조를 분석한 결과, 100$\sim$180 nm의 직경을 갖는 나노섬유들로 이루어진 다공성 부직포였다. DSC와 ATR FT-IR을 이용하여 결정화거동 및 구조를 분석하였다. 인장실험을 한 결과 나이론은 나이론탄성체에 비해서 인장강도는 크고, 신율은 감소된다. 결정영역인 PA블록과 무정형인 PE블록으로 된 나이론공중합체인 나이론 탄성체는 PE블록 비율이 클수록 인장강도는 낮아지고 신율은 증가된다. $O_2$와 $N_2$를 반응기체로 한 상압플라즈마로 전기방사된 나이론과 나이론탄성체의 부직포표면을 개질한 결과, 개질된 부직포표면은 표면개질 전보다 더 친수성을 보였으며 반면에 $CH_4$를 반응기체로 사용한 상압플라즈마로는 부직포표면을 개질하면 부직표면은 소수성을 나타내었다.

• 공업화학
• /
• 제4권2호
• /
• pp.349-357
• /
• 1993

Hydroxy-difunctional polyarylate(PAR) 올리고머와 toluene diisocyanate를 반응시켜 합성한 고분자 활성체를 사용하여 ${\varepsilon}$-caprolactam을 음이온 중합하여 다양한 블록길이의 PAR-nylon 6 블록공중합체들을 합성하였다. 합성한 블록공중합체들의 열적성질을 differential scanning calorimeter(d.s.c.)로 측정한 결과, 블록공중합체를 구성하는 PAR 블록과 nylon 6 블록은 부분적 상용성을 가졌으며, 그 정도는 블록의 길이가 짧을수록 컸다. PAR-nylon 6 블록공중합체와 PAR 혹은 nylon 6 homopolymer와의 이원블렌드에서 PAR homopolymer와 PAR 블록, nylon 6 homopolymer와 nylon 6 블록 사이의 분자수준의 섞임을 시사하는 거동을 d.s.c.로 관찰할 수 있었다.

• 접착 및 계면
• /
• 제15권4호
• /
• pp.169-173
• /
• 2014

크기가 다른 2가지 SiC 필러를 Nylon 66에 충전하여 용융혼련 시켜 복합재료를 제조하고 필러 크기가 열확산도에 미치는 영향을 고찰하였다. 필러를 충전하지 않은 경우에 비하여 60 vol%의 SiC 필러를 함유한 경우에 복합재료의 열확산도가 10배 이상 증가함을 확인하였고, SiC 필러의 평균크기가 $24{\mu}m$인 고분자복합재료의 열확산도가 $2.2{\times}10^{-2}cm^2/sec$였으나 필러크기가 76{\mu}m$인 경우에는 $1.75{\times}10^{-2}cm^2/sec$로 20% 감소하였다. 필러의 크기가 $24{\mu}m$인 경우에 열전도성 필러와 Nylon 66 매트릭스의 계면 접촉과 필러와 필러 사이의 접촉을 용이하게 하여 포논이 효과적으로 전달되는 것으로 보인다. Nylon 66보다 상대적으로 강직한 구조와 높은 가공온도를 가지는 Nylon 46를 매트릭스로 사용한 Nylon 46/SiC 400 (60 vol%) 복합재료의 열확산도는 $1.61{\times}10^{-2}cm^2/sec$였다.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.325-331
• /
• 2010

The alkaline dissolution behavior of sea-island type ultrafine nylon fiber were dependent on the concentration of NaOH and treatment time, and the most appropriate condition for alkaline dissolution was to treat with 20g/l NaOH for 30 min at $80^{\circ}C$. The dyeing properties of sea-island type ultrafine nylon fiber and regular nylon fiber were examined with 3 different types of acid dyes in this study. The dye uptakes of ultrafine nylon fiber were higher than regular nylon fiber because of large surface area per unit mass, which increased as the dye bath pH decreased. The dyeing rates on ultrafine nylon fiber were faster and dye exhaustions were higher than regular nylon fiber, however color strength and rating of wash fastness were lower. It was also found that levelling type acid dye showed fast dyeing rate on both nylon fibers than metal-complex and milling type acid dyes.

• 한국의상디자인학회지
• /
• 제16권1호
• /
• pp.117-123
• /
• 2014

This paper examined dyeing using sulfur dye with nylon and the characteristics of high gauge knitting for generating high functionality including light weight, wind resistance and elasticity using fine nylon threads. Yarn tension, stitch field and knitting speed of high and fine gauge knitting were measured. The influence of reducing agents on sulfur dye, optimum dyeing conditions and fastness features in nylon dyeing were analyzed. The analysis results are presented below. When nylon (Hyoseong, 40d/34f) and spandex (Hyoseong, 20d) for use as hosiery yarn were used to knit high gauge and flat weave, 44 gauge, the effective knitting conditions were a stitch field over 8.2cm in 1 course length, yarn tension of less than 5g and knitting speed below 18rpm. Nylon dyeing using sulfur dye showed effective results when a rongalite reducing agent was used at more than 10% o.w.f. and dyeing was maintained at $98^{\circ}C$ for 30 minutes. For dyeing nylon and spandex composite using sulfur dye, color fastness in washing, water, daylight and friction were higher than Class 4 or 5, which indicated a superior property. The analysis results verified that the existing problems in nylon dyeing could be solved by using sulfur dyes that don't use heavy metals due to superior fastness and therefore quality, high gauge nylon knit products could be produced.

• 복식
• /
• 제58권1호
• /
• pp.1-8
• /
• 2008

The purpose of this study was to investigate the mechanical properties and hand values of polypropylene knit and to analyze its color-fastness for light, laundering and abrasion, comparing to nylon and polyester knits. The results of this study were as follows: 1. Polypropylene stretched more with less force than nylon and polyester and its elastic recovery and shape stability were better than nylon and polyester. 2. Polypropylene was more flexible than nylon and polyester. 3. Polypropylene stretched more easily for shearing but its recovery from shearing was less than nylon and polyester. 4. Polyester had smoother surface than nylon and polyester. 5. Polypropylene was compressed more easily than polyester with less force but less than nylon. Its recovery from compression was more than nylon and polyester. 6. Polypropylene had lower KOSHI and SHARI values and higher FUKURAMI value than nylon and polyester. It had better T.H.V. value than nylon but less than! polyester. 7. Color fastness of polypropylene for lanudering, light, and abrasion in wet and dry conditions was good except polypropylene dyed with red color.

• 한국염색가공학회지
• /
• 제32권2호
• /
• pp.80-88
• /
• 2020

Supercritical fluid dyeing is a new alternative to the conventional aqueous process because of its environmental benefits. In this study, dyeing properties of Nylon 6 fabrics were investigated depending on dyeing temperature and pressure in supercritical CO₂ fluid dyeing system. In order to select the optimal condition for supercritical fluid dyeing of Nylon 6 fabrics, dyeing temperature and pressure were varied from 100, 110, 120℃, 200, 230, 260bar, respectively. The results of K/S values and levelling properties showed that the optimal dyeing condition for Nylon 6 fabrics was 110℃ and 230bar in the supercritical CO₂ fluid dyeing system. The washing fastness ratings of the dyed Nylon 6 fabrics under supercritical medium were good for both fading and staining except for staining on nylon.

• 한국염색가공학회지
• /
• 제17권2호
• /
• pp.26-30
• /
• 2005

Nylon fabric is widely used in stocking, inner wear, sports wear, and casual wear, but has a defect of easy electric static charging. Accordingly there has been great demand for the hydrophillic finishing technology that could be applied to nylon fiber more easily and efficiently. In this study, ethoxylated hexylantinoanthraquinones were exhausted onto nylon from aqueous bath, and hydrophillicity of the nylon was discussed. In the treatment of nylon fabrics with ethoxylated hexylaminoanthraquinones, they were successfully exhausted onto nylon fabric without any aid of chemical auxiliary. The hydrophilicity of the dyed nylon fabrics were increased with the length of ethoxylate chain. The durability of antistatic and hydrophilic characteristics was good enough as to maintain the initial properties even after 30 repeated launderings.

• 폴리머
• /
• 제37권2호
• /
• pp.211-217
• /
• 2013

Potassium tert-butoxide(t-BuOK)와 $CO_2$ 및 혹은 benzoyl chloride(BzC)를 각각 nylon 4 및 nylon 4/6 공중합체의 중합 개시제 시스템으로, 18-crown-6 ether(crown ether) 또는 tetramethyl ammonium chloride(TMAC)를 촉매로 사용하여 2-pyrrolidone(C4) 및 ${\varepsilon}$-caprolactam(C6)의 음이온 개환반응을 통하여 분자량이 매우 높은 polypyrrolidone(이하 nylon 4) 및 nylon 4 공중합체를 합성하였다. 개시제 시스템, crown ether 또는 TMAC가 중합반응에 미치는 영향을 분자량 및 수율 면에서 평가하였다. Crown ether나 TMAC를 사용하면 중합수율이 향상되었고 nylon 4의 경우 고유점도가 6.35 dL/g인 중합체를 합성할 수 있었다. 이 때 TMAC보다는 crown ether가 중합체의 분자량 상승에 더 효과적임을 확인할 수 있었다. 또한 제조된 중합체에 대해 TGA 및 DSC 열분석을 실시하였으며 분자량이 nylon 4 또는 nylon 4 공중합체의 열적 특성에 큰 영향을 미치지 않음을 확인하였다.