• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.589-596
• /
• 2006

This study aims to propose a new model axial flow fan which attachs centrifugal blades, and to investigate the effect of centrifugal blades on the performance improvement of new model axial flow fan. A numerical simulation has been conducted using STAR-CD commercial code to solve the three dimensional incompressible Navier-Stokes equation for high Reynolds number $k-{\epsilon}$ turbulent model. Numerical simulation is carried out to investigate the detail phenomenon in the flow field and performance characteristics of new model and normal model fan. Calculation results are compared with normal model's results to investigate which centrifugal blades effect on velocity profile and pressure distribution at various flow field positions. and calculation results show that new model fan can improve the performance of total pressure.

• 한국소음진동공학회논문집
• /
• 제24권3호
• /
• pp.180-188
• /
• 2014

현대자동차그룹은 HSM이라고 불리는 간략화된 차량 모델에 대하여 썬루프 버페팅 현상의 실험적인 조사를 시행하였다. 현대자동차그룹은 어떤 CFD솔버가 충분한 정확도를 가지고 썬루프 버페팅 현상을 예측하는지 조사하기 위해 상용CFD공급업체의 참여를 요청하였다. ANSYS Korea는 이번 조사에 참여하여 ANSYS fluent를 이용하여 HSM의 썬루프 버페팅에 대한 수치해석을 수행하였다. 먼저 유동장 검증을 위해 풍속 60 km/h에 대하여 썬루프가 닫힌 HSM모델에 대하여 해석을 수행하였다. HSM상부 면의 세 지점에서 속도 분포를 예측하였고, 이는 시험결과와 비교되었다. 그런 다음 고해상도 난류 모델인 DES를 이용한 해석이 전 풍속영역에 걸쳐 수행되었다. 버페팅 주파수와 버페팅 음압레벨이 예측되었고, 이는 시험결과와 비교되었다. 이를 통해 실제 차량 개발을 위한 CFD의 예측 가능성에 대하여 결론을 얻을 수 있었다.

• International Journal of Concrete Structures and Materials
• /
• 제9권1호
• /
• pp.45-54
• /
• 2015

This paper describes a three-dimensional approach to modeling the nonlinear behavior of partial-depth precast prestressed concrete bridge decks under increasing static loading. Six full-size panels were analyzed with this approach where the damage plasticity constitutive model was used to model concrete. Numerical results were compared and validated with the experimental data and showed reasonable agreement. The discrepancy between numerical and experimental values of load capacities was within six while the discrepancy of mid-span displacement was within 10 %. Parametric study was also conducted to show that higher accuracy could be achieved with lower values of the viscosity parameter but with an increase in the calculation effort.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.407-410
• /
• 2006

This study describes a simulation of two-dimensional bubble forming and motion by the Lattice Boltzmann Method with the phase field equation. The free energy model is used to treat the interfacial force and deformation of binary fluids system, drawn into a T-junction the micro channel. A numerical simulation of a binary flow in a cross-junction channel is carried out by using the parallel computation method. The aim in this investigation is to examine the applicability of LBM to numerical analysis of binary fluid separation and motion in the micro channel.

• 물과 미래
• /
• 제23권4호
• /
• pp.467-476
• /
• 1990

급격한 댐 파괴로 인한 홍수파가 마른하도 상에 전파되어 나가는 현상을 정파와 부파의 선단부의 이동을 추적하는 Hartree이동기법에 의하여 해석하였다. 본 연구에서 개발한 모형을 WES의 실험조건에 적용한 결과, 댐 상하류부 수개 지점에서의 수문곡선의 형상과 특성선의 전파양상에 있어 실측치와 계산치가 잘 일치되고 있었다. 본 연구에서의 해석기법은 마른 하도상에 전파되는 각종 홍수파 해석에 효과적으로 응용될 수 있을 것으로 판단되었다.

• 천문학논총
• /
• 제30권2호
• /
• pp.473-474
• /
• 2015

Halo merger trees are the essential backbone of semi-analytic models for galaxy formation and evolution. Srisawat et al. (2013) show that different tree building algorithms can build different halo merger histories from a numerical simulation for structure formation. In order to understand the differences induced by various tree building algorithms, we investigate the impact of halo merger trees on a semi-analytic model. We find that galaxy properties in our models show differences between trees when using a common parameter set. The models independently calibrated for each tree can reduce the discrepancies between global galaxy properties at z=0. Conversely, with regard to the evolutionary features of galaxies, the calibration slightly increases the differences between trees. Therefore, halo merger trees extracted from a common numerical simulation using different, but reliable, algorithms can result in different galaxy properties in the semi-analytic model. Considering the uncertainties in baryonic physics governing galaxy formation and evolution, however, these differences may not necessarily be significant.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권4호
• /
• pp.14-19
• /
• 2005

A transient numerical simulation was conducted to have variation of temperature on an element of resistive Superconducting Fault Current Limiter (SFCL) under quench condition. It is very important engineering information for an optimum design of cryogenic system for cooling of a resistive SFCL element. A bifilar coil for resistive SFCL for 10 MVA system was incorporated as a model in this numerical study. From the numerical simulation result, it was found that the averaged temperature on the shunt and Bi-2212 element at 500 kW, 100 ms was 711.1 K and 198.4 K respectively. The temperature variation with the change of the hot-spot size and time is also obtained. The maximum temperature was continuously increased in all cases until the hot-spot stops at 100ms and it was going down after then. Such as, the details of temperature distribution on the SFCL element obtained from this numerical study and it should be very valuable information on the decision of the cooling capacity of cryogenic system.

• Earthquakes and Structures
• /
• 제1권4호
• /
• pp.345-370
• /
• 2010

The paper presents a study on the numerical simulation of the behaviour of conventional reinforced concrete (RC) beams strengthened by thin fibre-reinforced cementitious matrix (FRCM) jackets. The study covers the cases of retrofitting RC beams with or without stirrups with jackets reinforced with longitudinal and transverse steel reinforcement or with light wire mesh. The strengthened RC beams to be modelled were tested under static monotonic and fully reversing cyclic loading. The numerical results show that the numerical model used predicted quite well the experimental results.

• 한국지반공학회지:지반
• /
• 제9권2호
• /
• pp.65-69
• /
• 1993

강우에 의해 발생되는 토양(soil)에서의 Recharge를 구하기 위해 두가지 모델 즉, ((i) Simple Mass Balance Model (ii) Numerical Model : UNSAT 1)을 사용했는데, 이 두 모델들은 불포화상태의 흙(unsaturated zone : above groundwater table)에서 그의 가정과 개념에 약간 차이가 있다. Unsaturated Zone에서의이 두 모델의 적용에 있어서 몇가지 중요한 사항이 지적되고 있는데, 균질의 불포화 영역(unsaturated zone)의 토양에서 Mass Balance Model을 사용함으로써 얻은 Recharge는 UNSAT 1(numerical model)을 통해 얻은 결과와 비교할 때 서로 상이한 결과를 보였다. 또한, Recharge의 계산에 있어서 지하수위의 변화에 따른 영향을 알아보기 위해 Sensitivity Analysis를 수행하였다. 즉, 고정수위(fixed groundwater table)로 가정했을 때 발생되는 오차를 한개의 수리학적 계수(hydraulic parameter)의 함수로 보고 계산을 했으며 이 결과를 그림으로 나타내어 보았다. 이 연구의 결과는 Model Simulation에 있어서 수리학적 경계조건을 결정하는데 큰 도움이 될 것이며, 또한 이 연구에서는 Unsaturated-Saturated Flow Model이나 Drainage Model을 함께 병행시켜 Simulation을 수행하는데 촛점을 두고 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.39-44
• /
• 2008

Stress wave propagation plays an important role in many engineering problems for reducing industrial noise and vibrations. In this paper, the dispersion-corrected finite element model is proposed for reducing the dispersion error in simulation of stress wave propagation. At eliminating the numerical dispersion error arising from the numerical simulation of stress wave propagation, numerical dispersion characteristics of the wave equation based finite element model are analyzed and some dispersion control scheme are proposed. The validity of the dispersion correction techniques is demonstrated by comparing the numerical solutions obtained using the present techniques.