• 대한전자공학회논문지TC
• /
• 제45권3호
• /
• pp.68-74
• /
• 2008

이더넷은 사설 근거리 통신망에서 매우 성공한 기술로써, 이더넷을 공중망에도 적용하면 프로토콜 변환 등으로 인한 네트워크 오버헤드가 줄어든다는 장점이 있다. 그렇지만 공중망에서는 종단간 끊임없는 연결을 제공하기 위하여 장애가 발생하는 경우에 50msec 이내에 망을 구하는 것이 필수적이다. 이를 위하여 ITU-T에서는 APS(automatic protection switching) 기반의 이더넷 망 보호 교환 시스템을 표준화하였다. 이 논문에서는 망에 장애를 복구하는 경우에 발생할 수 있는 프레임 손실을 최소화하기 위한 향상된 이더넷 망 보호 교환 메커니즘을 제안한다. 제안된 메커니즘의 성능은 ns-2 기반의 모의실험을 이용하여 분석되었으며, 제안 메커니즘이 기존 방법보다 우수한 성능을 제공하는 것을 알 수 있다.

• 한국전산구조공학회논문집
• /
• 제15권1호
• /
• pp.155-164
• /
• 2002

저널과의 마찰과 마멸을 줄이기 위하여 저널베어링이 사용된다. 저널베어링은 유체 윤활 상대에서 사용되나, 압력이 지나치게 높거나 회전 속도가 작아지면 탄성 유체 윤활 상태의 유막이 파괴되어 접촉부의 돌기가 접촉되는 경계 윤활 상태가 된다. 따라서 혼합 윤활 상태가 되면 저널베어링의 마멸량이 증가하게 된다 본 논문은 마멸율을 최소화함으로 저널베어링의 수명을 연장하는 최적설계를 수행하였다 목적 함수로 혼합 윤활 영역에서 적용되는 마멸을 함수를 사용하였고, 저널베어링 설계에서 고려할 성능 인자들인 마찰 손실, 안정 한계 속도, 유막 파라미터 등을 제약 함수로 사용하였다. 저널베어링 형상을 나타내는 베어링 반경, 축 반경, 베어링 폭 등에서 본 연구는 베어링 반경을 설계 변수로 하였다. 정식화한 설계인자를 이용하여 저널베어링의 최적 설계를 순차 이차 계획법인 PLBA알고리즘을 사용하여 수행하였다.

• Journal of Plant Biology
• /
• 제24권4호
• /
• pp.181-190
• /
• 1981

1963년부터 1977년까지 팔당산 호밀의 B 염색체의 출현빈도를 조사한 결과는 다음과 같다. 2%(1963), 8%(1964), 8%(1965), 15%(1966), 11.5%(1968), 11.7%(1969), 20%(1975), 19.6%(1976), 12.8%(1977). $x^2$검정의 결과는 각 년도에 있어서의 B'의 출현빈도 사이에 유의차가 없음을 나타내고 있다. 1976년과 1977년에는 호밀 밭을 10개 구로 나누어 재료를 수집하여 B'의 분포와 표본채취의 결과를 분석하였다. 호밀의 B'는 집단내에서 비교적 균일하게 분포되고 있으며 최소 50개체를 관찰하면 호밀 집단의 B'의 출현빈도를 대략 알 수가 있었다. 팔당산 호밀 집단에서 1966년부터 1977년까지 계속하여 전좌이형접합체(T.H)에 의한 사가염색체를 가진 개체가 1~7%의 빈도로 관찰되었다.

• 대한전자공학회논문지TC
• /
• 제38권11호
• /
• pp.30-40
• /
• 2001

본 논문은 무선 ATM 망에서 VBR 서비스의 가변적인 슬롯 요구량을 신속하고 정확하게 반영함으로써 무선 구간에서의 전송 효율을 최대화할 수 있는 Hybrid DP 제어기법 기반의 동적 슬롯 할당 알고리즘을 제안한다. 제안한 Hybrid DP 제어기법은 기존의 In-band 제어기법과 Out-of-band 제어기법의 장점을 보존하고 단점 및 제어의 한계성을 개선한 방법으로 이동 단말기의 버퍼 상태 변화에 따라 기지국으로 전송되는 ATM 셀에 동적 파라미터 값을 삽입하거나 별도의 제어 채널을 사용하여 단말기의 필요 슬롯 수를 기지국에 전송하는 방식이다. 따라서 VBR 서비스의 유동적인 데이터 발생률을 효율적으로 기지국에게 전송하여 슬롯 할당에 반영함으로써 제한된 무선 채널을 효율적으로 이용하면서 VBR 서비스의 QoS를 보장할 수 있다. 제안한 동적 슬롯 할당 알고리즘의 성능 평가를 위해 해석적 분석 및 시뮬레이션을 실시하였으며, 할당효율, 지연 및 셀 손실률 관점에서 기존의 제어기법보다 우수한 성능을 보였다.

• 전기전자학회논문지
• /
• 제7권1호
• /
• pp.97-106
• /
• 2003

ARQ 기반의 오류 제어에서 불완전한 오류 검출로 인해 패킷에 오류가 잔류하게 된다. 본 논문에서는 사본 중복 전송 ARQ에서 잔류 오류를 감소시키기 위한 재전송 요청 및 오류없는 사본의 결정 규칙을 제안한다. 이러한 $(m, \;{\sigma})$ 규칙을 사본 중복 전송 ARQ에 적용할 때, 잔류 오류는 감소하나 기존의 단일 사본만을 전송하는 ARQ에 비해 지연 및 throughput 성능은 열화될 수 있다. 따라서 $(m, \;{\sigma})$ 규칙이 적용된 사본 중복 전송 ARQ에서 야기되는 성능의 trade-off를 평가하기 위한 해석적 방법을 개발한다. 이러한 해석적 방법으로 구한 계량적 결과로부터 $(m, \;{\sigma})$ 규칙의 파라미터, 채널의 성질, 트래픽 부하가 오류 잔류 확률, 패킷 상실, 패킷 지연, throughput 등에 미치는 영향을 검토하여 다양한 QoS 요구 조건을 용이하게 수용할 수 있는 $(m, \;{\sigma})$ 규칙의 적응성을 확인한다.

• 한국수소및신에너지학회논문집
• /
• 제26권4호
• /
• pp.347-356
• /
• 2015

A study has been conducted numerically to investigate the lifted flat syngas flame structure of impinging jet flame configuration with the global strain rates in 10% hydrogen content. In this study, the effects of strain rate were major parameters on chemistry kinetics and flame structure at stagnation point. The numerical results were calculated by SPIN application of the CHEMKIN package. The strain rates were adjusted with Reynolds numbers of premixed syngas-air mixture. Different flame shapes were observed with different strain rates. As strain rate has increased, the flame temperature and axial velocity have been decreased due to the flame heat loss increment, and the OH radical reaction zones become narrower but each mole fractions are still constant. Also, the reversion of $H_2O$ product near stagnation point has been found out when strain rate has increased. This phenomenon is attributed to the rapid production of oxidizing radical reaction such as the R12 ($H+O_2(+M)=HO_2(+M)$), which makes the R18 ($HO_2+OH=O_2+H_2O$) reaction increment.

• 한국수소및신에너지학회논문집
• /
• 제24권6호
• /
• pp.558-565
• /
• 2013

This paper presents how to determine AEP(Annual Energy Production) by a small wind turbine in DuckjeokDo island. Evaluation of AEP is introduced to make a self-contained island including renewable energy sources of wind, solar, and tidal energy. To determine the AEP in DuckjeokDo island, a local wind data is analyzed using the annual wind data from Korea Institute of Energy Research firstly. After the wind data is separated in 12-direction, a mean wind speed at each direction is determined. And then, a small wind turbine power curve is selected by introducing the capacity of a small wind turbine and the energy production of the wind turbine according to each wind direction. Finally, total annual wind energy production for each small wind turbine can be evaluated using the local wind density and local energy production considering a mechanical energy loss. Throughout the analytic study, it is found that the AEP of DuckjeokDo island is about 2.02MWh/y and 3.47MWh/y per a 1kW small wind turbine installed at the altitude of 10 m and 21m, respectively.

• Journal of Periodontal and Implant Science
• /
• 제23권2호
• /
• pp.345-351
• /
• 1993

Various alloplastic materials have been used on the periodontally diseased ossous defects. Hydroxyapatite, which is used the most common alloplastic material is a non-resorbable form of calcium phosphate and natural coral which is a biodegradable by carbonic anhydrase in osteoclast was introduced recently. The purpose of the present study was to evaluate the clinical effects of porous hydoxyapatite and natural coral on the human periodontal defects. Four males and three females who had adult periodontitis were selected for this study. The teeth that had similar bone loss radiographically and periodontal pocket deeper than 5mm were selected. Gingival recession, pocket depth, plaque index(Silness & Loe), sulcus bleeding index and tooth mobility (measured by Periotest$^{(r)}$) were examined before graft. Before insertion of alloplastic materials, the depth from CEJ to bone crest and from CEJ to base of the osseous defect was recorded. Porous particulate hydroxyapatite(Interpore 200$^{(r)}$, A group) was place on the defect and natural coral(Biocoral$^{(r)}$, B group) was placed on the defect of the opposing tooth. Six months post-surgically the same parameters were recorded by reentry procedures. A and B group showed 0.6mm of mean recession. Mean reduction of pocket depth were 5mm for A group and 4.9mm of B group. Reduced SBI and tooth mobility were recorded. Osseous defect fills of the original defects were 2.9mm for A and 3mm for B group. Percentage defect fills were 71% for A and 59% for B group. The difference of defect fill between pre- and post-insertion was statstically significant(p<0.05). But the difference between the two groups was not significant statistically(p<0.05). The clinical impression at 6 month re-entry and the numerical date indicate that natural coral as well as porous particulate hydoxyapatite has a definite potential as an alloplastic implant in the treatment of periodontal osseous defects.

• 전기학회논문지
• /
• 제66권4호
• /
• pp.659-665
• /
• 2017

Power semiconductor devices required the low on-resistance and high breakdown voltage. Wide band-gap materials opened a new technology of the power devices which promised a thin drift layer at an identical breakdown voltage. The diamond had the wide band-gap of 5.5 eV which induced the low power loss, high breakdown capability, low intrinsic carrier generation, and high operation temperature. We investigated the p-type pseudo-vertical diamond Schottky barrier diodes using a numerical simulation. The impact ionization rate was material to calculating the breakdown voltage. We revised the impact ionization rate of the diamond for adjusting the parallel-plane breakdown field at 10 MV/cm. Effects of the field plate on the breakdown voltage was also analyzed. A conventional diamond Schottky barrier diode without field plate exhibited the high forward current of 0.52 A/mm and low on-resistance of $1.71{\Omega}-mm$ at the forward voltage of 2 V. The simulated breakdown field of the conventional device was 13.3 MV/cm. The breakdown voltage of the conventional device and proposed devices with the $SiO_2$ passivation layer, anode field plate (AFP), and cathode field plate (CFP) was 680, 810, 810, and 1020 V, respectively. The AFP cannot alleviate the concentration of the electric field at the cathode edge. The CFP increased the breakdown voltage with evidences of the electric field and potential. However, we should consider the dielectric breakdown because the ideal breakdown field of the diamond is higher than that of the $SiO_2$, which is widely used as the passivation layer. The real breakdown voltage of the device with CFP decreased from 1020 to 565 V due to the dielectric breakdown.

• Earthquakes and Structures
• /
• 제11권6호
• /
• pp.925-942
• /
• 2016

With ongoing development of earthquake engineering research and the lessons learnt from a series of strong earthquakes, the seismic design concept of "resilience" has received much attention. Resilience describes the capability of a structure or a city to recover rapidly after earthquakes or other disasters. As one of the main features of urban constructions, tall buildings have greater impact on the sustainability and resilience of major cities. Therefore, it is important and timely to quantify their seismic resilience. In this work, a quantitative comparison of the seismic resilience of two tall buildings designed according to the Chinese and US seismic design codes was conducted. The prototype building, originally designed according to the US code as part of the Tall Building Initiative (TBI) Project, was redesigned in this work according to the Chinese codes under the same design conditions. Two refined nonlinear finite element (FE) models were established for both cases and their seismic responses were evaluated at different earthquake intensities, including the service level earthquake (SLE), the design-based earthquake (DBE) and the maximum considered earthquake (MCE). In addition, the collapse fragility functions of these two building models were established through incremental dynamic analysis (IDA). Based on the numerical results, the seismic resilience of both models was quantified and compared using the new-generation seismic performance assessment method proposed by FEMA P-58. The outcomes of this study indicate that the seismic resilience of the building according to the Chinese design is slightly better than that according to the US design. The conclusions drawn from this research are expected to guide further in-depth studies on improving the seismic resilience of tall buildings.